Swann 410769-001 - Manual

1 � First-time setup Identify required hardware To set up the computer for the first time, you will need the computer, AC adapter, power cord, and the primary battery. ✎ Components included with the computer may vary by region and by model. Getting Started 1–1

First-time setup Set up the computer To set up the computer, you will 1. Insert the battery into the computer. 2. Connect the computer to external power. ✎ The battery begins to charge. 3. Turn on the computer. 4. Set up the software. 5. Create recovery discs (recommended). ✎ Refer to Appendix C, “ ...

First-time setup Step 1: Insert the battery To insert a primary battery: 1. Turn the computer upside down on a flat surface, with the battery bay toward you. 2. Slide the battery 1 into the battery bay until it is seated. The battery release latch 2 automatically locks the battery into place. 1–4 Ge...

First-time setup Step 3: Turn on the computer To open the computer: 1. Slide the display release latch 1 to the right to release the display. 2. Raise the display 2 . Getting Started 1–7

First-time setup Step 4: Set up the software After the computer is turned on, it will go through a brief software setup. Follow the on-screen instructions to set up the software. Note the following: ■ � After you respond to the setup prompt, you must complete the entire setup process without interru...

First-time setup Step 5: Create recovery discs (recommended) After setting up the computer for the first time, you can create a set of recovery discs of your full factory image using HP Backup and Recovery Manager. The recovery discs are used to start up (boot) the computer and restore the operating...

2 � Next steps Install additional hardware and software Identify and install hardware To see a list of hardware installed on the computer: 1. Select Start > My Computer . 2. In the left pane of the System Tasks window, select View system information . 3. Select Hardware tab > Device Manager . ...

Next steps Locate and install software The computer includes software that may be ■ � Preinstalled on your hard drive . To see a list of the ready-to-use software preinstalled on the computer: 1. Click Start > All Programs . 2. Double-click the program you want to open. ■ � Provided on a CD or DV...

Next steps Protect the computer The information in this section is designed to protect the computer from damage caused by a virus, a security breach, a power surge, or unsafe operation. Protect the computer from viruses When you use the computer for e-mail, network, or Internet access, you expose it...

Next steps Protect your privacy When you use the computer for e-mail, network, or Internet access, it is possible for unauthorized persons to obtain information about you or the computer. To optimize the privacy protection features included with the computer: ■ � Keep the operating system and softwa...

Next steps Use the computer safely Å WARNING: To reduce the risk of electric shock or damage to your equipment: ■ � Plug the power cord into an AC outlet that is easily accessible at all times. ■ � Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging ...

Next steps Å WARNING: To avoid potential discomfort or burns, do not block the air vents or use the computer on your lap for extended periods. The computer is designed to run demanding applications at full power. As a result of increased power consumption, it is normal for the computer to feel warm ...

Next steps Connect to a computer network The computer may have the following networking capabilities: ■ Local area network (LAN) ■ Wireless local area network (WLAN) ■ Bluetooth® If you plan to connect the computer to a home office LAN or WLAN, refer to the Help and Support Center for information on...

Next steps Update your software Most software, including the operating system, is updated frequently by the manufacturer or provider. Important updates to the software included with the computer may have been released since the computer left the factory. Some updates may affect the way the computer ...

Next steps Turn off the computer correctly Whenever possible, turn off the computer by using the standard shutdown procedure: 1. Save your work and close all open applications. 2. Shut down the computer through the operating system by selecting Start > Turn Off Computer > Turn Off . ✎ If you h...

3 � Troubleshooting Troubleshooting resources If you experience computer problems, follow the troubleshooting steps below: 1. Refer to “ Quick troubleshooting ,” next in this chapter. 2. Access additional information about the computer and Web site links through the Help and Support Center. Select S...

Troubleshooting Quick troubleshooting The computer is unable to start up To turn on the computer, press the power button. When the computer is turned on, the power light is turned on. If the computer and the power light are not turned on when you press the power button, adequate power may not be ava...

Troubleshooting The computer screen is blank If the computer is on but the screen is blank, the computer may be in standby or hibernation, may not be set to display the image on the computer screen, or the display switch may not be functioning properly. Try the suggestions below to resolve the issue...

Troubleshooting Software is functioning abnormally If the software becomes unresponsive or responds abnormally: ■ � Restart the computer: ❏ � In Windows XP Home, select Start > Turn Off Computer > Restart . ❏ � In Windows XP Professional, select Start > Turn Off Computer > Restart > O...

Troubleshooting The computer is turned on but not responding If the computer is turned on, but not responding to software or keyboard commands, turn off the computer by using the standard shutdown procedure: 1. Save your work and close all open applications. 2. Shut down the computer through the ope...

Troubleshooting The computer is unusually warm It is normal for the computer to feel warm to the touch while it is in use. But if the computer feels unusually warm, it may be overheating because a vent is blocked. If you suspect that the computer is overheating, allow the computer to cool to room te...

Troubleshooting An external device is not working If an external device does not function as expected: ■ � Turn on the device as instructed in the device user guide. Some devices may not be powered by the computer, and must be turned on before the computer is turned on. ■ � Be sure that ❏ � All devi...

Troubleshooting The home wireless network connection is not working If a home wireless network connection is not working as expected: ■ � Be sure that the wireless light on the computer is on. If the light is off, press the wireless button to turn it on. ■ � Be sure that the computer wireless antenn...

Troubleshooting Help and Support Center If the preceding questions and solutions did not address your problem, access the Help and Support Center by selecting Start > Help and Support . In addition to providing information about your operating system, the Help and Support Center provides ■ � Info...

Troubleshooting Customer Care If you are unable to find the help you need by using the Help and Support Center, you may need to contact Customer Care. Prepare to contact Customer Care For the fastest possible resolution of your problem, have the computer and the following information available when ...

Troubleshooting Contact Customer Care by e-mail or telephone If the computer is connected to the Internet, select Start > Help and Support to get help by e-mail or to access the Customer Care telephone numbers. Getting Started 3–11

A � Notebook tour � ✎ Components included with the computer may vary by region and model. The illustrations in this appendix identify the standard features included on most computer models. Getting Started A–1

Notebook tour Top components Component 1 Power light 7 Num lock light 2 Display switch 8 Volume mute button 3 Power button 9 Volume mute light 4 Wireless button - Volume down button 5 Wireless light q Volume up button 6 Caps lock light A–2 Getting Started

Notebook tour Keys Component 1 esc key 4 Windows applications key 2 fn key 5 Embedded numeric keypad 3 Windows logo key 6 Function keys Getting Started A–3

Notebook tour Pointing devices Component 1 TouchPad 3 Right TouchPad button 2 Left TouchPad button 4 TouchPad scroll zone A–4 Getting Started

Notebook tour Front components Component 1 Wireless light 4 Drive light 2 Power light 5 Display release latch 3 Battery light Rear components Component 1 Power connector 2 External monitor port Getting Started A–5

Notebook tour Right-side components Component 1 Audio-out (headphone) jack 3 USB ports (2) 2 Audio-in (microphone) jack 4 Optical drive A–6 Getting Started

Notebook tour Left-side components Component 1 Security cable slot 5 1394 port 2 RJ-45 (network) jack 6 USB port 3 RJ-11 (modem) jack 7 PC Card slot 4 Vent Getting Started A–7

Notebook tour Bottom components Component 1 Primary battery bay 5 Docking connector 2 Primary battery release 6 Expansion memory module latches (2) compartment 3 Business card holder 7 Vent 4 Hard drive bay 8 Accessory battery connector A–8 Getting Started

B � Connect to the Internet from your home The computer includes hardware and software that allows you to connect to the Internet. Before you can access the Internet, you must ■ � Choose an Internet Service Provider (ISP). ■ � Choose the type of Internet connection you want, such as broadband, wirel...

Connect to the Internet from your home Use the New Connection Wizard You can use the New Connection Wizard to connect to the Internet ■ � If you already have an account with an ISP. ■ � If you have a disc from an ISP. ■ � If you do not have an Internet account and would like to select an ISP from th...

Connect to the Internet from your home Choose the type of Internet connection There are 3 basic types of Internet connection: ■ � Broadband : High-speed Internet access is available through ❏ Cable modem ❏ Digital Subscriber Line (DSL) ❏ Satellite ❏ Other services For broadband access, additional ha...

C Backup and recovery HP Backup and Recovery Manager provides several ways to back up the system and to recover optimal system functionality. ✎ HP installed drivers, utilities, and applications can be copied to a CD or to a DVD using the HP Backup and Recovery Manager. Safeguard your data Software o...

Backup and recovery Back up specific files or folders You can back up specific files or folders to the computer hard drive, to an optional external hard drive, or to discs. To back up specific files or folders: 1. Select Start > All Programs > HP Backup & Recovery Manager > HP Backup an...

Backup and recovery Back up the entire system When you perform a complete system backup, you are saving the full factory image, including the Windows operating system, software programs, and all personal files and folders. ✎ A copy of the entire hard drive image can be stored on another hard drive, ...

Backup and recovery 7. Select the Protect data access with password check box, and type your password in the Password box. ✎ This step is optional. If you do not want to password protect your data access, clear the Protect data access with password check box. 8. Click Next to back up your entire har...

Backup and recovery To create and schedule a system recovery point: 1. Select Start > All Programs > HP Backup & Recovery Manager > HP Backup and Recovery Manager . The HP Backup and Recovery Manager opens. 2. Click Expert Mode . 3. Click Create or manage your recovery points , and then...

Backup and recovery Recover the system HP Backup and Recovery Manager analyzes the hard drive and creates a dedicated hard drive recovery partition on the hard drive large enough to store a copy of the full factory image. You choose whether you want to store that copy on the recovery partition, on a...

Backup and recovery Perform a recovery Performing a recovery from the recovery discs To perform a recovery from the recovery discs: 1. Back up all personal files. 2. Insert the first recovery disc into the optical drive and restart the computer. 3. Follow the on-screen instructions. Performing a rec...

Backup and recovery From f11 : a. Restart the computer. b. Press f11 while the “Press <F11> for recovery” message is displayed on the screen. c. Continue to step 2 to complete the recovery process. 2. Choose one of the following options: ❏ � Recover PC to a specific point in time : Allows you ...

D � Specifications The following sections provide information on the computer operating environment specifications and power specifications. Operating environment The operating environment information in the following table may be helpful if you plan to use or transport the computer in extreme envir...

Specifications Rated input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. Although the computer can be powered from a standalone DC power sourc...

1394 port, identifying A–7 A AC adapter connecting 1–5 identifying 1–2 accessory battery connector, identifying A–8 altitude specifications D–1 antivirus software 3–4 audio-out (headphone) jack, identifying A–6 B battery charging 1–6 indentifying 1–2 inserting 1–4 battery bay, identifying A–8 batter...