SUNFIRE Speaker - Manual

The Sunfire XT Series Satellite Loudspeaker Stand Kit is designed as an assembly manual for mounting CRM-2 satellite speakers, covering both hardware setup and basic electrical configuration. This guide highlights key functional areas: installation of the stand’s structural components–base, column, and adapter plate–to ensure proper speaker alignment; detailed step-by-step instructions for securing the speaker via Allen screws and routing wires through designated channels; and essential electrical setup, including binding post connections and boundary compensation adjustments. The documentation emphasizes practical assembly and connection procedures rather than theoretical specifications or troubleshooting beyond basic functionality.

stand. It has been designed as a perfect match
for the CRM-2 satellite loudspeakers – following
the cabinet's taper and producing an elegant,
one-piece look. A high-gloss lacquered base and
column ensures that form meets function. This
guide shows you how to assemble the stand and
mount the CRM-2. Please read the CRM-2 User's
Manual for further details of these loudspeakers,
including location, operation and features. Please
note that the CRM-2 is sold separately.

Assembly overview

The column is attached to the base using four
Allen screws supplied. The CRM-2 loudspeaker
has an adapter plate that lines up with a keyhole
bracket in the column, and the loudspeaker is held
in place by two locking screws. Speaker wires are
neatly hidden within the column and exit from the
base. Four rubber screw-on feet are supplied to

t on the base.

Unpacking

Your stand kit should reach you in perfect condi-
tion. If you do notice any shipping damage, please
contact Sun

re immediately. Make sure that

you keep your sales receipt. It is the only way to
establish the duration of your Limited Warranty.

Contents of each stand kit

• Base

• Column

• Speaker Adapter Plate

• 4 Allen screws for attaching the column to the base

• 1 Allen screw for attaching your CRM-2 satellite loud-

speaker to the speaker adapter plate

• 2 Allen screws for attaching the speaker adapter plate

to the column

• Allen wrench

• 4 screw-on spikes, 4 screw-on rubber feet, with wrench

CRM-2

Column

Base

Satellite Loudspeaker Stand Kit

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.