Page 2 - Dear SunBriteTV Customer:; IMPORTANT SAFETY INSTRUCTIONS; Disposal of these ma-; NOTE TO CAT V SYSTEM INSTALLER:; Important Safety Instructions; ©SunBriteTV LLC 2008. All rights reserved.
Page 2 Dear SunBriteTV Customer: Congratulations on your ownership of the SunBriteTV Model 5510HD. This product is designed as a weatherproof LCD television that can be installed outdoors. To ensure safety and minimize mechanical malfunctions of your product, please read the Important Safety Instruc...
Page 3 - SunBriteT V Model 5510HD Operator’s Manual; Cleaning Instructions:; Carrying the television requires at least two people.; FCC Statement; Reorient or relocate the receiving antenna.
SunBriteT V Model 5510HD Operator’s Manual Page 3 Cleaning Instructions: Use a soft cloth with mild detergent in warm water to clean the SunBriteTV screen. Remove any dirt and salt deposits from the unit, being careful to rinse the cloth frequently to avoid scratching the screen surface. Avoid using...
Page 5 - Table of Contents
SunBriteT V Model 5510HD Operator’s Manual Page 5 Important Safety Instructions Table of Contents Supplied Accessories TV Installation Choose a Location for the TV Detachable Speaker Module Installation Rear Panel Internal Connect Source Rear Panel Connection Diagrams Side Panel and Front Panel Cont...
Page 6 - Supplied Accessories; Unpacking; Choose a Location for the TV; TV Installation - Choose a Location for the TV
Page 6 Supplied Accessories Unpacking After unpacking the SunBriteTV television, please make sure that the following items are included in the carton and that they are in good condition. If items are damaged or missing, contact your dealer immediately. SunBriteTV LCD Television Model 5510HD Remote C...
Page 7 - TV Installation - Detachable Speaker Module Installation; Detachable Speaker Module Installation; WARNING: Use at least two people when transporting the TV.
SunBriteT V Model 5510HD Operator’s Manual Page 7 TV Installation - Detachable Speaker Module Installation Detachable Speaker Module Installation Tools Needed: Phillips screwdriver Note: a. If you mount the TV on the Table Stand, the Detachable Speaker Module must be installed before you attach the ...
Page 8 - TV Installation – Rear Panel Internal Connect Source; Internal Connect Source; Indentations; Rear Panel Connections
Page 8 Page 8 TV Installation – Rear Panel Internal Connect Source WARNING: Do not connect the power source before making connections. Internal Connect Source The Internal Connect Source allows you to easily connect to the Audio, Video, S-Video, SVGA, HDMI, Audio Out, RF, RS232, and 12 VDC connector...
Page 9 - TV Installation – Rear Panel Connections; Rear View Connections
SunBriteT V Model 5510HD Operator’s Manual Page 9 TV Installation – Rear Panel Connections Rear View Connections 13. IR Emitter Window - The Internal Infrared (IR) Control Window allows the TV to be controlled from a remote system using IR commands. 14. RS232 - The RS232 connection allows the TV to ...
Page 10 - Connection Descriptions:; Blue
Page 10 Connection Descriptions: TV Installation – Rear Panel Connections Cable Descriptions: Blue Green Red Yellow Green White Red Orange
Page 11 - TV Installation – Rear Panel Connections/Connection Diagrams; Switching Sources for Ports:; Make sure the power to the TV is turned off .; Connecting to Digital Cable without Cable Box or Antenna; Make sure the power of the TV is turned off .
SunBriteT V Model 5510HD Operator’s Manual Page 11 TV Installation – Rear Panel Connections/Connection Diagrams Switching Sources for Ports: Model 5510HD off ers several options when connecting your devices to the TV. The chart below will help you understand which source you switch to for each of th...
Page 12 - TV Installation – Rear Panel Connection Diagrams; Connecting to Cable or Antenna through VCR; CONNECTING TO A DVD PLAYER; Make sure the power of TV and your DVD player is turned off .
Page 12 TV Installation – Rear Panel Connection Diagrams CONNECTING TO AN ANTENNA--(Continued) Connecting to Cable or Antenna through VCR 1. Make sure the power of the TV is turned off . 2. Make sure there is an antenna or cable connection to the VCR already. 3. Use a Coaxial RF cable and connect fr...
Page 13 - Turn on the TV and your DVD player.
SunBriteT V Model 5510HD Operator’s Manual Page 13 TV Installation – Rear Panel Connection Diagrams CONNECTING TO A DVD PLAYER (Continued) 1. Make sure the power of the TV and your DVD player is turned off . 2. Obtain an S-Video Cable. Connect the S-Video connector to both your DVD player and Compos...
Page 14 - CONNECTING TO A SATELLITE OR CABLE SET-TOP BOX; Make sure the power of TV and your set-top box is turned off .
Page 14 Page 14 TV Installation – Rear Panel Connection Diagrams CONNECTING TO A SATELLITE OR CABLE SET-TOP BOX 1. Make sure the power of the TV and your set-top box is turned off . 2. Connect a HDMI cable to the HDMI output of your set-top box and the other end to the HDMI port off the back of your...
Page 16 - CONNECTING TO AN EXTERNAL AMPLIFIER OR AMPLIFIED SPEAKERS; Make sure the power of the TV and your receiver is turned off .; Connecting with Coaxial SPDIF Digital (Best)
Page 16 TV Installation – Rear Panel Connection Diagrams CONNECTING TO AN EXTERNAL AMPLIFIER OR AMPLIFIED SPEAKERS 1. Make sure the power of the TV and your receiver is turned off . 2. Obtain a Coaxial SPDIF cable, connect it to your receiver’s coaxial SPDIF digital input and the Coaxial SPDIF conne...
Page 17 - Make sure the power of the TV and your PC is turned off .; CONNECTING TO GAME CONSOLES
SunBriteT V Model 5510HD Operator’s Manual Page 17 Connecting with RCA Audio Analog (Good) 1. Make sure the power of the TV and your PC is turned off . 2. Obtain a 15-pin D-Sub VGA cable, connect to the VGA output of your PC and the other end to the VGA port off the back of your TV. 3. Obtain a 3.5 ...
Page 18 - For the Playstation 3; Make sure the power of the TV and your Xbox 360 is turned off .; For the XboxTM; Make sure the power of the TV and your Wii is turned off .; For the WiiTM
Page 18 TV Installation – Rear Panel Connection Diagrams CONNECTING TO GAME CONSOLES (Continued) For the Playstation 3 1. Make sure the power of the TV and your Xbox 360 is turned off . 2. Obtain the Xbox 360 Component Cable. Connect the green color connector to Component 1’s green connector port on...
Page 19 - TV Installation--Rear Panel Connection Diagrams; Power; Press to change the input sources.; Menu; IR Sensor; Connecting the Power Cord; Side Panel
SunBriteT V Model 5510HD Operator’s Manual Page 19 TV Installation--Rear Panel Connection Diagrams Power Turns TV on/off . Input Press to change the input sources. Menu Displays the On-Screen Display (OSD) menu. In OSD menu, press key to return to pre-phase. CH+/CH- Adjusts channels. In OSD menu, bo...
Page 20 - available on this TV.; Remote Control Guide
Page 20 ON – Powers the TV On. OFF – Powers the TV Off . 0~9 – Sets the channels. Dash (-) – Inserts the dash for selecting digital channels directly. R – Returns to the previous channel. FREEZE – Freezes the TV picture. CC – Cycles between diff erent closed captioning modes. SLEEP – Sets the Sleep ...
Page 22 - Picture Menu; Adjusting On-Screen Displays – Picture Menu
Page 22 On-Screen Display Menu - Picture Menu Picture Menu Picture: This function changes the picture settings for all ports, such as tint, contrast, sharpness and dynamic noise reduction. Audio: This menu manages the audio settings such as Bass, Treble, Balance, AVC, SPDIF, Audio Language, etc. Tim...
Page 23 - Adjusting On-Screen Displays – Audio Menu; Audio Menu
SunBriteT V Model 5510HD Operator’s Manual Page 23 Adjusting On-Screen Displays – Audio Menu Audio Menu 1. Press buttons to move the cursor to the item to be selected. 2. Press buttons to make the desired adjustments. 3. When you are satisfi ed with your adjustments, press MENU or EXIT to exi...
Page 24 - Adjusting On-Screen Displays – Time Menu
Page 24 Adjusting On-Screen Displays – Time Menu Time Menu 1. Press buttons to move the cursor to the item to be selected. 2. Press buttons to make the desired adjustments. 3. When you are satisfi ed with your adjustments, press MENU or EXIT to exit the main menu. Sleep Timer Press buttons t...
Page 25 - Adjusting On-Screen Displays – Setup Menu
SunBriteT V Model 5510HD Operator’s Manual Page 25 Adjusting On-Screen Displays – Setup Menu Setup Menu 1. Press buttons to move the cursor to the item to be selected. 2. Press buttons to make the desired adjustments. 3. When you are satisfi ed with your adjustments, press MENU or EXIT to exi...
Page 26 - Adjusting On-Screen Displays –; Setup Menu; Closed Caption
Page 26 Adjusting On-Screen Displays – Setup Menu Closed Caption From the Setup Menu, press buttons to Closed Caption, then press button to enter the Closed Caption submenu list shown below. Basic Selection Press buttons and then use buttons to select current zoom mode, the options are C...
Page 27 - From the Setup Menu, press
SunBriteT V Model 5510HD Operator’s Manual Page 27 Adjusting On-Screen Displays – Setup Menu XVS (Dynamic Luminance Control) From the Setup Menu, press buttons to XVS, to enter the XVS menu. Use the buttons to select ON or OFF.
Page 28 - Adjusting On-Screen Displays – Lock Menu; Lock Menu
Page 28 Adjusting On-Screen Displays – Lock Menu Lock Menu Press buttons to move the cursor to the Enter Password selection. Press “Enter Password” to enter the password. ( The default password is 0000.) To change the Password, press the button to enter the Lock Menu submenu Lock Menu Sub-Menu ...
Page 30 - Canada; Canada English; Press the; Canada French; Press the; Canada Menu
Page 30 Adjusting On-Screen Displays – Lock Menu Canada Press the button to enter the submenu for the Canadian rating functions. Canada English Press the button to select one of E / C / C8+ / G / PG / 14+ / 18+. Canada French Press the button to select one of E / G / 8ans+ / 13ans+ / 16ans...
Page 31 - Adjusting On-Screen Displays – Channel Menu; Channel Menu
SunBriteT V Model 5510HD Operator’s Manual Page 31 Adjusting On-Screen Displays – Channel Menu Channel Menu Channel Menu The CHANNEL MENU is used in TV source, only.You can complete channel search and settings here Air/Cable Press buttons to select Air or Cable. Auto Scan Press the button to e...
Page 32 - Favorite
Page 32 Adjusting On-Screen Displays – Channel Menu Favorite From the Channel Menu, press the buttons to select Favorite. Press the button to enter the submenu shown at left. Press keys to select channels, and press OK to add current channel to Favorite Channel Table. Follow the same directi...
Page 33 - Trouble Shooting
SunBriteT V Model 5510HD Operator’s Manual Page 33 Trouble Shooting
Page 34 - Care of SunBriteTV; Clean the window by using the following directions:; Use a soft brush and towel to remove snow and ice from the unit.
Page 34 Care of SunBriteTV Important Information About the Anti-Refl ective Window on your SunBriteTV Outdoor Television The anti-refl ective window on your all-weather TV is designed to dramatically reduce refl ection and improve the contrast of the image on your TV. In order to preserve the anti-r...
Page 35 - Specifi cations; Specifi cations for SunBriteTV Model 5510HD; *Temperature range is for operation in shaded location.; Front View
SunBriteT V Model 5510HD Operator’s Manual Page 35 Specifi cations Specifi cations for SunBriteTV Model 5510HD *Temperature range is for operation in shaded location. Specifi cations are subject to change. Front View Side View Specifi cations PC Timing Codes Dimensions with detachable speaker module...
Page 36 - SunBriteTV’s Pixel Quality Policy; Features Information and Instructions
Page 36 When programming a DirectTV, local cable universal remote control or Control system, you may fi nd that SunBriteTV may not be on the list of TV manufacturers. If that is the case, Model 5510HD supports SONY’s universal remote code. Programming Other Manufacturers’ Universal Remote Control De...
Page 37 - Appendix A - RS232 Control Codes
SunBriteT V Model 5510HD Operator’s Manual Page 37 Appendix A - RS232 Control Codes
Page 38 - Appendix B - RS232 Control Cable Pinout; SunbriteTV RS232 Control Cable
Page 38 Appendix B - RS232 Control Cable Pinout 1 6 Ground Rx Data From control system Tx Data to control system DB9F, Typical PC Serial / Control Sy stem RS232 port. 5 1 1/8" Stereo Plug Com Specs: 9600 baud 8 data, 1 stop, no parity July 17 2007 Preliminary SunbriteTV RS232 Control Cable SIZE ...
Page 39 - This page is intentionally left blank.
