Sunbeam VS4300 - User Manual

How to make a Bag from a FoodSaver ® Roll. 1. Place the appliance on a flat, dry surface and plug the supply cord into a standard electrical outlet. 2. Open the lid. 3. Cut roll to desired length plus 7.5 cm. Place one end of the bag on the sealing strip, but do not place the bag into the vacuum cha...

8 Tips on Sealing a Bag Prevent moisture or liquid from being pulled into the Vacuum Channel or trapped in the seal. Either pre-freeze moist food such as raw meat for 1-2 hours before vacuum packaging, or place a folded paper towel between food and end of bag to absorb excess liquids. Just be sure t...

Care and Cleaning Instructions The FoodSaver ® Appliance 1. Always unplug the appliance before cleaning. 2. Clean using a mild dishwashing soap and a warm, damp cloth. Do not immerse the appliance in water. Dry thoroughly before using. 3. Do not use abrasive products or materials to clean any of the...

14 Preparation Guidelines for Meat and Fish For best results, pre-freeze meat and fish for 1-2 hours before vacuum packaging in a FoodSaver ® Bag. This helps retain the juice and shape and guarantees a better seal.If it’s not possible to pre-freeze, place a folded paper towel between meat or fish an...

Preparation Guidelines for Baked Goods To vacuum package soft or airy baked goods, we recommend using a FoodSaver ® Canister so they will hold their shape. If using a bag, pre-freeze for 1-2 hours or until solidly frozen. To save time, make cookie dough, pie shells, whole pies, or mix dry ingredient...

16 Preservation Guidelines Foods Where to Store Recommended FoodSaver ® Products Storage Life with FoodSaver ® Products Normal Storage Life Meat Beef, Pork, Lamb Freezer FoodSaver ® Bag 2-3 years 6 months Ground Meat Freezer FoodSaver ® Bag 1 year 4 months Poultry Freezer FoodSaver ® Bag 2-3 years 6...

Nothing happens when pressing the PRESS/HOLD areas • Check to see that the appliance is plugged in. Test electrical outlet by plugging in another appliance. • The appliance will shut off automatically if overheated. Allow to cool down for 20 minutes and try again. • Check supply cord and plug for da...

Should you experience any difficulties with your product during the warranty period, please contact our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand. Alternatively, you can send a written claim to Sunbeam to: Australia Units 5 & 6, 13 Lord Street ...