Sunbeam SR5880 - Manual - manualsarea.com

Page 2 - Contents

Sunbeam’s Safety Precautions 3 Features of your Ultura Iron 4 Using your Ultura Iron 6 The Safety Auto-Off Feature 7 Care and Cleaning of your Ultura Iron 8 Ultura Ironing Tips & Tricks 9 Ironing Chart 10 Contents Important instructions – retain for future use.

Page 3 - Sunbeam’s Safety Precautions

3 Sunbeam’s Safety Precautions Sunbeam is very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appl...

Page 6 - Using your Sunbeam Ultura Iron

Before first use Remove any adhesive stickers, plastic covers or cardboard sleeves from the soleplate. Ensure that all adhesive is removed by rubbing the soleplate with a cloth dampened with methylated spirits.Fill the water tank and empty the water. This will rinse out any foreign particles remaini...

Page 7 - The safety auto-off feature

Using the shot of steam The shot of steam can be used when dry or steam ironing, when the temperature dial is set to any temperature within the steam band or above the two dot ( •• ) setting. 1. Ensure the tank is at least 1/4 full of water. 2. Select the desired temperature and wait until the boost...

Page 8 - Care and Cleaning

After each use 1 Turn the STEAM/DRY dial to DRY.2 Turn the power off and remove the plug from the power outlet. 3 Empty any remaining water from the water tank. 4 Allow the iron to cool before winding the cord around the built-in cord wrap. Storage Always store the iron on its heel rest.NOTE: Do not...

Page 9 - Ultura Ironing Tips and Tricks

Tip # 27 - Iron shirts like a pro Start with the collar, working from the outer edges into the middle. Iron the shoulder next, followed by the cuffs and sleeves. Place the collar at the narrow end of the board so that one front panel of the shirt is extended flat. Iron the front panel from shoulder ...

Page 10 - Ironing Chart

10 Ironing Chart FABRIC TEMPERATURE SETTING IRONING RECOMMENDATION Acrylic • Dry iron on wrong side. Acetate • Dry iron on wrong side while still damp or use spray to dampen. Nylon • Iron on wrong side while still damp or use spray to dampen. Polyester • Iron on wrong side while still damp or use sp...

Page 11 - Year Replacement Guarantee

Should you experience any difficulties with your appliance, please phone our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand. Alternatively, you can send a written claim to Sunbeam at the address listed below. On receipt of your claim, Sunbeam will seek ...

Sunbeam SR5880 - Manual

Table of Contents:

Summary

Other Sunbeam Models