Sun Joe 24V-WSB-LTE - User Manual

A Division of Snow Joe

®

, LLC

Model 24V-WSB-LTE

Form No. SJ-24V-WSB-LTE-880E-M

R

OPERATOR’S MANUAL

© 2020 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

SAVE THESE INSTRUCTIONS

1

CORDLESS WORKSHOP BLOWER + VACUUM

24-VOLT MAX* |

2.0 Ah | 180 MPH

IMPORTANT!

Safety Instructions
All Operators Must Read These

Instructions Before Use

Read all the instructions contained in this manual. Keep this

manual in a safe place, so that the information is available at

all times. If you give the equipment to another person,

make sure to provide these operating instructions. Basic safety

precautions should always be followed to reduce the risk of

fire, electric shock, and personal injury.

m

DANGER!

This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

m

WARNING!

This indicates a hazardous situation, which,

if not followed, could result in serious injury or death.

m

CAUTION!

This indicates a hazardous situation, which,

if not followed, could result in minor or moderate injury.

Improper use of the machine will invalidate the warranty,

relieve the manufacturer from all liabilities. The user will

consequently be liable for all and any damage or injury to

himself/herself or others.

General Safety

FOR HOUSEHOLD USE ONLY

m

CAUTION!

Wear appropriate hearing protection during

use. After long periods of extended use, the noise generated

from this appliance may cause hearing loss if your ears are

not properly protected.

m

WARNING!

When using the power tool, basic safety

precautions should always be followed to reduce the risk of

fire, electric shock, and personal injury. These include:

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents.

2. Replacement parts – When servicing this unit, use only

identical replacement parts.

3. Keep children, bystanders, and pets away –

All spectators, including pets, should be kept a safe

distance away from the work area.

4. Dress properly –

Do not wear loose clothing or jewelry

as such articles can get caught in moving parts. Wear a

protective covering to contain long hair. Wearing rubber

gloves and substantial non-slip footwear is recommended

when working outdoors.

5. Prevent unintentional starting – Ensure the switch is in

the off-position before connecting to battery pack, picking

up or carrying the appliance. Carrying the appliance with

your finger on the switch or energizing an appliance that

has the switch on invites accidents.

6. Disconnect battery pack before cleaning or servicing –

Disconnect the battery pack from the appliance before

making any adjustments, changing accessories,

or storing. Such preventive safety measures reduce the

risk of starting the appliance accidentally.

m

WARNING!

Do not modify or attempt to repair the

appliance or the battery pack (as applicable) except as

indicated in the instructions for use and care.

7. Moving parts – Keep hands and feet away from moving

parts. Keep guards in place and in proper working order.

8. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it is designed.

9. Wear personal protective equipment – When using this

tool, wear safety glasses with side shields or goggles to

provide necessary eye protection. Wear ear defenders to

prevent hearing damage. Use a face or dust mask if the

work environment is dusty.

10. Remove the battery – Remove the battery when the

tool is not in use, before servicing it, when changing

accessories, and when performing any other maintenance

task.

11. Store idle tool indoors – When not in use, the workshop

blower + vacuum should be stored indoors in a dry and

high or locked-up place out of the reach of children.

12. Use the right tool –

Do not use the tool for any job except

that for which it is intended.

13. Avoid dangerous environments – Do not use the

workshop blower + vacuum in rain, damp, or wet

locations.

14. Stay alert – Watch what you are doing. Use common

sense. Do not operate the workshop blower + vacuum

when you are tired or under the influence of drugs,

alcohol, or other medication.