Sun Joe 24V-PHT17-LTE - User Manual

© 2020 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

SAVE THESE INSTRUCTIONS

1

EN

A Division of Snow Joe

®

, LLC

R

OPERATOR’S MANUAL

Model 24V-PHT17-LTE

Form No. SJ-24V-PHT17-LTE-880E-MR2

CORDLESS POLE HEDGE TRIMMER

24V MAX* | 2.0 Ah | 17- INCH | MULTI-ANGLE

IMPORTANT!

Safety Instructions
All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Power Tool Safety

Warnings

m

WARNING!

Read all safety warnings and all

instructions. Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)

power tool.

m

DANGER!

This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

m

WARNING!

This indicates a hazardous situation, which,

if not followed, could result in serious injury or death.

m

CAUTION!

This indicates a hazardous situation, which,

if not followed, could result in minor or moderate injury.

Work Area Safety

1. Keep work area clean and well lit – Cluttered or dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases

or dust – Power tools create sparks which may ignite the

dust or fumes.

3.

Keep children and bystanders away while operating a

power tool – Distractions can cause you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools.

Unmodified plugs and

matching outlets will reduce risk of electric shock.

2.

Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators – There is an increased risk of electric shock

if your body is earthed or grounded.

3. Do not expose power tools to rain or wet conditions

– Water entering a power tool will increase the risk of

electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric

shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of a cord

suitable for outdoor use reduces the risk of electric shock.

Personal Safety

1. Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a

power tool while you are tired or under the influence

of drugs, alcohol or medication – A moment of

inattention while operating power tools may result in

serious personal injury.

2.

Use safety equipment.

Always wear

eye protection – Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal

injuries.

3. Avoid accidental starting. Ensure the switch is in the

off-position before plugging in –

Carrying power tools

with your finger on the switch or plugging in power tools

that have the switch on invites accidents.

4.

Remove any adjusting key or wrench before

turning the power tool on – A wrench or a key left

attached to a rotating part of the power tool may result

in personal injury.

5.

Do not overreach. Keep proper footing and balance at

all times – This enables better control of the power tool in

unexpected situations.

6. Dress properly. Do not wear loose clothing or jewelry.

Keep your hair, clothing and gloves away from moving

parts – Loose clothes, jewelry or long hair can be caught

in moving parts.

7. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used – Use of dust collection

can reduce dust-related hazards.