Summit Appliance SLW241W - User Manual

5 INSTALLATION AND CONNECTION • Remove the exterior and interior packaging before using your appliance. • Place the washing machine on a clean, dry concrete floor strong enough to support the machine. • Let the washing machine stand for at least two hours before first using the appliance. NOTE: Befo...

7 • For normal washing machine operation, the water main pressure should be between 0.05 and 0.8 MPa (7.25 and 116psi). Minimum dynamic water pressure can be determined by measuring the water flow. In 15 seconds, 0.8 gal (3 liters) of water should flow from a fully opened tap. • Firmly tighten the w...

9 Connecting the Power Supply • Before connecting the washing machine to the power supply, wait for a least two hours until the appliance reaches room temperature. • Connect the washing machine to a grounded power outlet, which should be freely accessible after installation. • DO NOT connect the was...

11 Program Table Program Max. load Program description Cotton black WARM ** (1/2) This program is used for washing dark laundry, using special-purpose detergents for black laundry. The program washes at low temperatures, with gentle tumbling and a lower spinning rate. Cotton color - HOT * MAX This p...

13 Choosing the Proper Settings Most washing programs feature specific settings, which can be adjusted by pressing the relevant functional buttons before starting the wash cycle. Activate and deactivate any setting by pressing the desired function before pressing the START/PAUSE button: • Functions ...

14 Start Delay This function prevents the washing cycle from starting until after a set amount of time has elapsed. • Press the Start/Delay (10) button, and the symbol will be lit. Adjust the delay time in 30-minute increments, up to six hours, and by 1-hour increments, up to 24 hours. Press the STA...

15 Starting the Washing Machine • Once the proper wash program and settings have been selected, press the START/PAUSE button to being the washing cycle. The symbols displayed on the control panel correspond to the specific settings for the washing cycle. o After the wash cycle begins, only the spin ...

16 MAINTENANCE AND CLEANING CAUTION: Unplug the washing machine from the power supply before cleaning. Clean the exterior of the washing machine with a soft, damp cloth and warm water. DO NOT use any solvents or cleaners, which could damage the washing machine. Cleaning the Dispenser Tray 1. Slide t...

17 Cleaning the Water Supply Hose, Detergent Dispenser, and Door Gasket 1. Unscrew the water intake hose, and remove the water net filter. Clean the filter with a toothbrush under running water. 2. Replace the water net filter into the water intake hose. 3. Clean the entire washing machine rinsing s...

18 TROUBLESHOOTING If any irregularities occur during normal operations, E: XX will display on the control panel. This will be displayed until the machine is switched off. Try the suggestions below to see if you can solve the problem. Problem/ Error Indication on the display unit and problem descrip...

21 DISPOSAL This washer’s packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. This symbol on the product or its packaging indicates that the product should not be treated as normal household waste. Take the pr...

22 PROGRAM DURATION AND RATE TABLE Programs Temp. NORMAL CARE (basic/default setting) SPIN (SPINNING RATE) Washing time [minutes] [rpm] Cotton black WARM 77 * MAX Cotton color HOT 182 * MAX WARM 192 94 Cotton white EXTRA HOT 200 * MAX HOT 174 WARM 184 Mix (Mixed laundry/Synthetics) HOT 129 * MAX WAR...

24 LIMITED WARRANTY ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair ...