Page 2 - FCC Compliance Statement; • Reorient or relocate the receiving antenna.; Use of Trademarks, Registered Trademarks, and
www.compatible.eu +31 35 628 14 14 [email protected] FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference ...
Page 4 - Instruction Manual; ii
Instruction Manual www.compatible.eu +31 35 628 14 14 [email protected] Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 VirtKeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 5 - Features; All applications
Instruction Manual 1 Introduction Thank you for purchasing a StarTech.com Server Remote Control. Using the Internet oryour TCP/IP enabled network, you can now remotely monitor and control critical PCservers and workstations, using an industry-standard Web browser or VNC client. Features • Supports i...
Page 6 - Installing the KVM Remote Control; Connecting the Unit to the Host Computer and Network; KVM cable as the VGA connection you completed in the previous step.
Instruction Manual 2 Installing the KVM Remote Control Connecting the Unit to the Host Computer and Network *SV841HDIE rear panel shown 1. Power down the computer to which the KVM Remote Control will be connected ( host computer ). If purchased, install the unit in your rack or cabinet following the...
Page 7 - Connecting a Local Keyboard, Mouse, and Monitor; To connect console devices:
Instruction Manual 3 Connecting a Local Keyboard, Mouse, and Monitor 1 2 3 4 *SV841HDIE rear panel shown 5 6 7 8 9 10 11 12 13 14 15 16 1 DC In 2 Link 3 Serial Port 4 VGA Out 5 R-Port 6 LAN 7 PS/2 Keyboard 8 PS/2 Mouse 9 - 16 Remote connections SVxx41HDIE has the capability to connect a local keyboa...
Page 8 - and turn off
Instruction Manual 4 Disabling Mouse Acceleration on the Host Computer Many operating systems offer a feature called mouse acceleration, allowing the user toadjust the responsiveness of the cursor on the screen in relation to physical movementsof the mouse. W hile this is usually a beneficial interf...
Page 9 - Configuring SVxx41HDIE
Instruction Manual 5 Configuring SVxx41HDIE SVxx41HDIE offers four distinct methods for configuring the unit for your network. W hichmethod will work best will depend on your level of experience and your specific networkconfiguration. Please note : Connecting the remote computers prior to following ...
Page 10 - any time, you can return to the previous menu by pressing the; Page Up; Web Configuration Using DHCP
Instruction Manual 6 any time, you can return to the previous menu by pressing the Page Up key. Please note: Although it is nota required step, changing theAdmin Password adds securityto your configuration settings.By default, the Admin Passwordis set to Admin . Web Configuration Using DHCP This met...
Page 11 - Web Configuration Using Static IP; For details on how to change the IP address of your
Instruction Manual 7 The easiest way to identify your SVxx41HDIE on the network is by its MAC address, aunique hardware identifier that is specific to your unit. The MAC address of the unit canbe found on a white sticker on the bottom of the SVxx41HDIE. W rite down this numberand keep it for future ...
Page 12 - Terminal Configuration Using a Serial Cable; None; Using the Web Interface; the
Instruction Manual 8 Terminal Configuration Using a Serial Cable Configuring the SVxx41HDIE using a serial cable is the best choice if you need to pre-configure the unit before attaching it to a network, i.e. when sending to a branch office,customer site, etc. In general, the Web configuration is pr...
Page 13 - with a password of
Instruction Manual 9 The Login Screen Before you can access the Web configuration interface, you must enter a user name andpassword. The default username and password as shipped from the factory isusername admin, with a password of admin . NOTE: Before the login screen appears, your Web browser may ...
Page 17 - Compatibility
Instruction Manual 13 Security: This menu allows you to configure a number ofsettings, including changing the default passwordfor admin (recommended). Read and considerthe comments and instructions on this menubefore making any changes, as changing thesefeatures could make the unit inaccessible thro...
Page 18 - The RADIUS server requires the IP address, the; Serial Ports; menu allows you to manage
Instruction Manual 14 RADIUS: The RADIUS server requires the IP address, the UDP port number (1812 - default or 1645) and the shared secret. The shared secret is used to encrypt communications and corresponds to a shared password for the RADIUS server and theclient machine. Two additional servers ma...
Page 20 - The; Status; screen displays a system security log,; Port Numbers; provides a table allowing you to; Commit; to use the settings the next time the; Restart Servers
Instruction Manual 16 Status: The Status screen displays a system security log, various system settings, and the ability togenerate a copy of the system configuration inplain text format. Port Numbers: Port Numbers provides a table allowing you to change TCP port values for services available onthe ...
Page 21 - Using the Terminal Interface via Serial Port; Accessing the VNC Interface; Web Interface
Instruction Manual 17 Using the Terminal Interface via Serial Port The terminal interface you can access via the serial port permits the configuration of thebasic settings of the SVxx41HDIE. W hile not intended to be a substitute for the Webinterface, it does allow you to configure some of the same ...
Page 22 - Native VNC Client; Use a command like this:
Instruction Manual 18 Native VNC Client This system implements the VNC protocol, so any off the shelf VNC client can be used.There are over 17 different VNC clients available and they should all work with thissystem. This system automatically detects and makes use of certain extensions to thebasic R...
Page 23 - Using the VNC Menu; will appear, indicating; Bribar Feature; and mouse are being emulated via USB connection or PS/2 signals. If; Autosync
Instruction Manual 19 Using the VNC Menu One of the unique features of this product is the VNC menu system. W henever you see awindow with a dark blue background and grey edges, this window has been inserted intothe VNC data stream so that it is effectively laid over the existing video. These menusa...
Page 24 - Redraws the entire screen contents occurs immediatel y.; NumLock; and; ScrollLock
Instruction Manual 20 Resync: Re-aligns the remote and local mouse points so they are on top of each other. Redraw: Redraws the entire screen contents; occurs immediatel y. PS/2: Resets the PS/2 keyboard and mouse emulation. Useful to recover failed mouse and/or keyboard connections in PS/2 mode. ÷4...
Page 26 - Ctrl
Instruction Manual 22 working. • Take Control: W hen multiple users are connected to the same system, use this button to take control away from another user. Only one user may control the keyboard andmouse at any time. All users see the same picture. • Thumbnails: Switch to smaller thumbnail size sc...
Page 27 - VirtKeys Menu
Instruction Manual 23 VirtKeys Menu Clicking any button in the top half of the window simulates pressing and releasing theindicated key. In the bottom area of the screen, clicking will simulate the indicated Metakey being pressed. You may then click in the top part to send another key and release th...
Page 29 - order to reduce this effect.
Instruction Manual 25 Getting Peak Performance Choose the best video mode • We recommend using 60Hz refresh rate and 1024x768 resolution. Using a smaller resolution like this allows you to fit multiple windows on your remote desktop. Higherrefresh rates stress the video card's quality and do not pro...
Page 31 - Using the Modem feature; this feature requires both an external modem (most standard; Connecting a Modem; Modem Connection
Instruction Manual 27 Using the Modem feature Background The modem feature allows the SVxx41HDIE to act as an Internet connection server forincreased security and flexibility in connecting with the host computer. Unlike the TCP/IPconnection used with the standard Web configuration and VNC clients, t...
Page 34 - Modem Troubleshooting Guide
Instruction Manual 30 users are connected while a PPP session is active, their screens will be in grayscale as well. W hen PPP in inactive, color is automatically re-enabled. • Some areas of the screen may not be updated as frequently as others, and animations or other auto-updating areas of the scr...
Page 36 - off
Instruction Manual 32 # : You can assign a value ( 1 ~ 99 ) to each attached serial remote control module. This does not affect the configuration or operation of the device in any way, but is simply ameans to sort this list for ease of management. Name/Description: An identifier for the R-Port modul...
Page 38 - Operating Notes; • All users have equal access to all channels.; About Security Certificate Warnings
Instruction Manual 34 Operating Notes • If the power supply to the R-Port modules you have connected becomes faulty (short, overload) then the R-Port LED on the front panel of the SVxx41HDIE will show red.Under normal operations, this light should remain green. The R-Port connector on therear panel ...
Page 39 - and click
Instruction Manual 35 Can I prevent the warning from occurring? Yes. You have two options that may prevent the warning from occurring. First, if the Webbrowser you are using offers the option to ignore the warning for future visits, the browserwill no longer generate a warning if that option is sele...
Page 40 - Troubleshooting
Instruction Manual 36 Troubleshooting Forgotten master password. You can reset the master password using the serial interface on the unit. Use the S command, and type a new password. The old password is not required for thisprocedure. Remote mouse and local mouse don't line up. Use the Mouse resync ...
Page 41 - Maximum supported video mode; General Specifications
Instruction Manual 37 Specification s Maximum supported video mode 1600 x 1200 @85Hz Standard video modes supported 640x400 @ 85Hz720x400 @ 85Hz640x480 @ 60Hz, 72Hz, 75Hz, 85Hz800x600 @ 56Hz, 60Hz, 72Hz, 75Hz, 85Hz1024x768 @ 60Hz, 70Hz, 75Hz, 85Hz1152x864 @ 75Hz1280x960 @ 60Hz, 85Hz1280x1024 @ 60Hz,...
Page 42 - Supported Protocols
Instruction Manual 38 Service Description Benefit SSH Secure Shell May be used to securely “tunnel” VNC and HTTP protocols. HTTP Web redirector (to HTTPS) Convenience server to redirect all web traffic to encrypted port. Clear-text HTTP is not supported SNMP SNMP agent (UDP) Allows integration with ...
Page 43 - About Compatible; Visit
About StarTech.com StarTech.com is “The Professionals’ Source for Hard-to-Find ComputerParts”. Since 1985, we have been providing IT professionals with thequality products they need to complete their solutions. We offer anunmatched selection of computer parts, cables, server managementsolutions and ...
