StarTech.com SV1654DX4I - Manual

5 Using DHCP This method requires that your network implement DHCP (Dynamic Host Configuration Protocol), usually on a server or network access device such as a router, that dynamically allows devices to join the network without pre-configuration. If the unit is powered on and connected to the netwo...

6 please write this number down and keep it for future reference. Once you locate the MAC address of your unit in the DHCP log, you can match it to its leased IP address and proceed with the Web configuration. Please note: Once you have located the IP address of the SVxx54DX4I and wish • to proceed ...

9 Windows 2000 From the Control Panel, click on 1. Mouse . From Mouse properties, click on the 2. Motion tab. Make sure that the 3. Pointer speed bar is centered and Acceleration is set to None . Windows XP and Windows Server 2003 Go to Pointer Options and turn off Enhance Pointer Precision . Ensure...

10 Please note that you may notice a pattern of vertical bars briefly displayed during distance calibration; this is normal. As such, please disregard. Using the Web Interface The Web interface offers the most intuitive way to configure the SVxx54DX4I, as it provides a Java-based VNC client that can...

11 Because Java is considered a “safe” programming language, the Java VNC client has some limitations. Certain special keystrokes cannot be sent, such as “Scroll Lock” on the keyboard. This client software requires the use of Java 2 (JRE 1.4) to enable features like wheel mouse support. Sun Microsys...

12 Web Interface Introduction Home After the initial login screen, the Home screen will appear, offering a Screen Thumbnail view of the controlled computer, as well as basic file transfer functions, Monitoring Information, System Identification and VNC Client options.

18 Booting from USB Disk: If the host computer’s BIOS supports USB boot devices, it is possible to boot from the emulated CD-ROM or floppy - allowing complete operating system replacement without any on-site intervention.)The first step is getting a bootable disk image onto the emulated floppy or CD...

19 ‘ Admin Functions The Admin functions allow you to access all of the features you will need to perform an initial configuration of the SVxx54DX4I. Network Config DHCP (Dynamic Host Configuration Protocol) Automatic network configuration using DHCP is: Enabled/Disabled . This feature applies only ...

28 features opened by the code will be enabled immediately, but you may need to reboot the unit to begin using certain features. Info Functions Status The Status screen displays a system security log, various system settings, and enables you to generate a copy of the system configuration in plain te...

30 Help Menu Provides an FAQ (Frequently Asked Questions) listing to assist you with the features and operation of the SVxx54DX4I. Site map Menu This menu provides a hyperlinked directory of each setting available on the Web configurator. Copyright Menu Provides the Terms of Use and other informatio...

31 Native VNC Client This system implements the VNC protocol, so any off-the-shelf VNC client can be used. There are several different VNC clients available and they should all work with this system. This system automatically detects and makes use of certain extensions to the basic RFB protocol that...

32 you want to tunnel two or more systems, you will need to use a unique number for each instance on the same SSH client machine. Some Unix versions of the VNC client have integrated SSH tunneling • support. Some clients require your local user id to be the same as the userid on the system. Use a co...

35 Main Menu To access the main menu, quickly press the F7 key twice quickly. You must press the key twice within one second. If you press it once or too slowly, then the F7 key(s) are sent to the host, just like any other key. This is the only way to get into the menu system, if the Bribar is disab...

38 VirtKeys Menu Clicking any button in the top half of the window simulates pressing and releasing the indicated key. In the bottom area of the screen, clicking will simulate the indicated Meta key being pressed. You may then click in the top part to send another key and release the Meta key at the...

39 Video Tuning Menu Use the Auto Everything button to automatically fine-tune all three adjustments. If the test pattern for Color Offset calibration is not present on the screen, then the Color Offset adjustment is skipped. Changes/frame Indicates the number of 16x16 blocks of video that are being...

44 Disk Control Menu Status: Shows the current disk type. This can be changed through the web interface. Access: Shows the number of completed read and write operations. Disk Owner: Which PC port has control of the disk. Only one port may access it a time. USB Replug: Disconnects and reconnects the ...

45 Accessing KVM Features OSD Operations Start the OSD (On-Screen Display) by pressing the left <CTRL> or <ScrLk> key twice within one second. The entry for the currently selected computer is highlighted in green in • the OSD Use the <UP> and <DOWN> arrow keys to highlight a ...

46 OSD Function Keys Please Note: Channel names can only be changed through the web interface. Changing Your Configuration After the initial power up, any device can be moved, added or removed from any port on the KVM without powering down the switch. The attached computer must be powered up for it ...

47 Using the Modem feature NOTE: Requires an RJ45 to DB9 adapter. Please see StarTech.com part number(s): GC98FF (DB9 Female to RJ45 Female Adapter) or GC98MF (DB9 Male to RJ45 Female) as applicable. Background The modem feature allows the SVxx54DX4I to act as an Internet connection server for incre...

48 Connecting a Modem The SVxx54DX4I will work with virtually any Hayes-compatible modem that recognizes the standard AT command set. Some modem manufacturers offer “enterprise” grade modem products that include technology to improve the stability of connections; whether this type of product would b...

49 reflect the line conditions at the time the connection is made. The serial port can be used for serial port configuration when the modem is connected. It requires the use of a null modem serial cable. Place the modem near the SVxx54DX4I and an available telephone 1. jack. Connect the modem to the...

50 to activate it. The string included should work with the majority of modems and configures the following connection properties: answer incoming calls on the first ring, enable hardware flow control, and lock the connection speed. Your modem’s documentation will describe other potential init strin...

51 Click 3. Create a new connection under Network Tasks. The 4. New Connection Wizard window will open. Click Next . Select 5. Connect to the Internet , then click Next . Select 6. Set up my connection manually , then click Next . Select 7. Connect using a dial-up modem and click Next . In the space...

54 redirected without their knowledge. Certificates are issued by trusted third parties called Certificate Authorities (CAs) and contain essential details about a site that must match the information supplied to your Web browser. Why do I receive a warning when accessing the login screen? As it redi...

56 Built-in Terminal Emulation The built in Terminal Emulator is an ANSI terminal that allows local users (Directly connected or via the User station) the ability to initialize a command prompt shell to connect to remote and local devices via SSH, Telnet and directly connected serial ports. Please n...

57 How to create a New Connection (Using the Wizard) Use the arrow keys or underlined letter to select “Create new 1. connection (using wizard) Select your connections method or protocol (example: SSH, Telnet, 2. Direct)

61 Troubleshooting Forgotten master password You can reset the master password using the serial interface on the unit. Use the S command, and type a new password. The old password is not required for this procedure. Similarly, you can press (and hold) the reset button (located to the immediate left ...

63 Serial Interface Pinout RJ45 DB9 (male) Signal 1 6 DSR (input) 2 1 DCD (input) 3 4 DTR (output) 4 5 GND 5 2 RxD (input) 6 3 TxD (output) 7 8 CTS (input) 8 7 RTS (output) N/A 9 RI (not used) The DB9 side is wired as DCE (same as a computer). *

64 Technical Specifications Maximum Recommended Resolution 1280 x 1024@ 60Hz Maximum Supported Resolution 1600 x 1200 @ 60 Hz Host Connectors SV1654DX4I: 16 x RJ45 SV3254DX4I: 32 x RJ45 Console Connectors 2 x HDDB15 Female Other Connectors 2 x USB A Female (Front Panel) 2 x USB A Female (Rear Panel)...

65 Operation Temperature 0°C to 40°C (32°F to 104°F) Humidity 80% rh, nc Dimensions 310 x 440 x 44 mm Weight 2200 grams (4.5 Lbs) Electrical 100-240 V AC, 0.5 A, IEC320 socket Frequency 50-60 Hz Caution This is an IEC safety Class 1 product. Before using, the ground wire in the line cord or the rear...