Page 3 - Table of Contents
Instruction Manual i Instruction Manual Table of Contents Introduction ................................................................................... 1 Features ...................................................................................... 1Package Contents ................................
Page 4 - Instruction Manual
Instruction Manual ii User Station Filtering – MAC Addresses ..................................... 21Custom SSL Certificates ............................................................. 21User Management ....................................................................... 22Customization ..........
Page 5 - Introduction; Features
Instruction Manual 1 Introduction The SV1107IPEXT Server Remote Control KVM over IP with Virtual Me-dia capability enables simple management of remote servers from any-where in the world, through remote administrative control, while providing a convenient way to monitor computers and servers over a ...
Page 6 - Hardware Requirements
Instruction Manual 2 Hardware Requirements For best results, we recommend that the computers used to access the SV1107IPEXT control unit have at minimum a Pentium III 1 GHz proces-sor, with the screen resolution set to 1024 x 768. Browsers must support 128-bit SSL data encryption • Recommended Inter...
Page 7 - Hardware Guide
Instruction Manual 3 Hardware Guide 1 2 3 4 5 Component Description 1 Reset Switch System Reset: Pressing and holding this switch in for more that three seconds performs a system resetRestore Factory Default Settings: Power off the SV1107IPEXT, then press and hold the reset switch for at least 3 sec...
Page 8 - Hardware Guide - Cont’d
Instruction Manual 4 Hardware Guide - Cont’d Please Note: if you are using a wireless keyboard/mouse set, connect the receiver to the Keyboard port of the KVM cable Component Description 1 Power Jack The power adapter connection 2 PC/KVM Port The connection for the cable that links the SV1107IPEXT t...
Page 9 - Computer Preliminary Setup; ipconfig, then press
Instruction Manual 5 Computer Preliminary Setup Find your computer’s IP address and default Gateway by doing the follow-ing: Click on 1. Start, then RUN. Enter 2. CMD in the text box. Click on [ 3. OK] or press the [Enter] key. When the command line window opens, Type 4. ipconfig, then press Enter: ...
Page 10 - SV1107IPEXT Preliminary Setup
Instruction Manual 6 SV1107IPEXT Preliminary Setup Connect the SV1107IPEXT and your computer to your network using the following diagram. This is a preliminary set up, so no other connections are needed. Most home networks use automatic IP Addressing, and the SV1107I-PEXT is provided with a default ...
Page 11 - Windows VistaTM
Instruction Manual 7 Windows XP and 2000 Locate, and double-click on the 1. Network Connections icon, within the Windows Control Panel. Right-click on 2. Local Area Connection (or Wireless network connection) Select 3. Properties. Under the General tab highlight Internet Protocol TCP/IP Click on the...
Page 12 - SV1107IPEXT Initial Configuration
8 Instruction Manual SV1107IPEXT Initial Configuration Open your web browser. You will get a Page cannot be displayed 1. error message, this is normal. In the Address line, type: 2. http:// 192.168.0.60, then press Enter. When the certificate windows pop 3. up, accept them. When the below screen app...
Page 13 - Network icon (shown below) along the top; Set IP Address manually (A static IP Address is preferred).
Instruction Manual 9 After logging in, click on the 5. Network icon (shown below) along the top of the window. Select 6. Set IP Address manually (A static IP Address is preferred). The actual address you use is dependent on your network’s address range: As an example: In the preliminary set up, the ...
Page 15 - Hardware Setup; Installation; unplug the power cords of
Instruction Manual 11 Hardware Setup Installation To install the SV1107IPEXT, refer to the installation diagram on the follow-ing page: Use the Console cable provided to connect the SV1107IPEXT’s 1. Console port, to the local keyboard, monitor and mouse, they are color coded for identification. Use ...
Page 16 - Installation - Cont’d
Instruction Manual 12 Installation - Cont’d 1 2 3 4 5 6
Page 17 - Figure 2) Place the
Instruction Manual 13 (Optional) Mounting to a Cabinet/Rack If you wish to mount the SV1107IPEXT in a server/storage rack/cabinet, using the included bracket: ( 1. Figure 1) Remove the two screws closest to the rear panel of the SV1107IPEXT, on the base of the unit. ( 2. Figure 2) Place the mounting...
Page 18 - Normal Logon; User name : administrator
Instruction Manual 14 Normal Logon To operate the SV1107IPEXT from an Internet browser, begin by logging in. Open your browser and specify the IP address (assigned in the pre-liminary set up) of the SV1107IPEXT in the browser’s Address bar. A Security Alert dialog box, similar to the one below, appe...
Page 20 - Administration
Instruction Manual 16 Administration The icons arranged vertically on the left side of the screen (shown left) are linked to the administration utilities, which are used to configure the SV1107IPEXT. Your ability to make configuration changes depends on the permissions associated with your login inf...
Page 21 - Network; Access Ports
Instruction Manual 17 Network The Network dialog is used to specify the SV1107IPEXT’s network envi-ronment. Access Ports If a firewall is being used, the Administrator can specify (in the firewall set up) the port numbers that it will allow. When connecting to the SV1107IPEXT, users must specify the...
Page 22 - IP Address; DNS Server; IP Change Notification
Instruction Manual 18 IP Address The SV1107IPEXT can have its IP address assigned dynamically at boot-up (DHCP), or can be given a fixed IP address.Please note: If you wish to access the SV1107IPEXT from the Internet, assign a static IP address as you will need to configure your router to forward th...
Page 23 - Security; Overview
Instruction Manual 19 the operability of the e-mail notification. An e-mail should be sent to the e-mail address specified in the To: field Please Note: This will only notify you if the SV1107IPEXT changes its address on your local network, it will not notify you if your external ad-dress changes. S...
Page 24 - Filtering
Instruction Manual 20 Filtering To enable IP and/or MAC filtering, place a checkmark in the IP Filter Enable and/or MAC Filter Enable checkbox. There is a maximum of 100 filters allowed for each option. If the • include button is checked, all the addresses within the filter range are allowed access ...
Page 25 - Edit. The Edit dialog box is similar to; User Station Filtering – MAC Addresses; Add. A dialog box similar to the one; Edit. When the dialogue box; Custom SSL Certificates
Instruction Manual 21 To delete a filter, select it and click Remove. To modify a filter, select it and click Edit. The Edit dialog box is similar to the Add dialog box. When it appears, simply delete the old address and replace it with the new one. User Station Filtering – MAC Addresses To add a MA...
Page 26 - Browse button, and locate the generated certificate file, then; Upload to upload the file.; User Management; User Info; Add.The user’s name appears in the User List panel.
Instruction Manual 22 Enter the following command: openssl req -x509 -nodes -days 365 -newkey rsa: 1024 -keyout mycert.pem -out mycert.pem In order to use a custom SSL certificate, the created PEM file must then be uploaded through the web interface. Click on the Browse button, and locate the genera...
Page 27 - User; User Info fields. When; Password field, then key it in again in the Confirm field.
Instruction Manual 23 To delete a user profile, select it from the names displayed in the User List panel, and click Remove. The user’s name is removed from the User List panel.To modify a user profile, first select it from the list in the upper panel, then change the information that appears in the...
Page 28 - Customization
Instruction Manual 24 Please Note: If a user is denied a permission, that permission will not be visible on the Utility tool bar, when that user logs on. Customization This configuration page allows the Administrator to set Timeout, Login Failure, and Working mode parameters. An explanation of the C...
Page 29 - Firmware; Firmware File dialog box:; Browse, then navigate to location of the new firmware and click
Instruction Manual 25 Firmware As new versions of the SV1107IPEXT firmware become available, they can be downloaded from our website.Check the website regularly to find the latest information and packages.To upgrade the firmware, do the following: After downloading the new firmware file to your comp...
Page 30 - Apply icon at the left side of the; Required Equipment
Instruction Manual 26 After the upload completes, click the 4. Apply icon at the left side of the web page. Enable the 5. Reset on Exit checkbox on the Customization page. Re-click the 6. Apply icon at the left of the web page. Click the 7. Logout icon at the upper right of the web page to exit and ...
Page 31 - Using The Windows Client; Save to disk direct the file to be
Instruction Manual 27 Open a web browser on the remote computer. 3. Type in the IP Address you wrote down in step 6 of SV1107IPEXT 4. Initial configuration for example http://192.168.1.60, then hit the enter key You will be taken to the SV1107IPEXT Logon screen 5. Enter your user name and password i...
Page 33 - The Windows Client Control Panel
Instruction Manual 29 Please Note: Due to network lag, there might be a delay before your keystrokes • appear on the screen. You may also have to wait a bit for the remote mouse to catch up to your local mouse before you click. Due to net lag, or insufficient computing power on the local machine, • ...
Page 34 - Hotkey Setup
Instruction Manual 30 Icon Function Exit from the Windows Client From left to right, these icons indicate the current Num Lock, Caps Lock and Scroll Lock state, respectively.When the corresponding icon is illuminated, the function is active. When connected, toggle the LEDs to set the correct state P...
Page 35 - Set. Repeat for any other actions you wish to change.
Instruction Manual 31 To customize a hotkey combination: Highlight the Action, and then click 1. Start. Key in the Function keys (one at a time). The key names appear in the 2. Key field as you press them.When you have finished keying in your sequence, Click 3. Stop. Click 4. Set. Repeat for any oth...
Page 36 - Video Adjustment
Instruction Manual 32 Action Explanation Substitute Ctrl key If your local computer captures Ctrl key combinations, preventing them from being sent to the remote system, you can implement their effects on the remote system by specifying a function key to substitute for the Ctrl key.If you substitute...
Page 38 - The Message Board
Instruction Manual 34 The Message Board The SV1107IPEXT supports two user logins, (only one user has control at a given time), which can possibly create access conflicts. To alleviate this problem, a message board feature has been provided, allowing users to communicate with one other. Message board...
Page 39 - All Users prior to sending a message.
Instruction Manual 35 By default, messages are posted to all users. To post a message to an • individual user, select the user’s name before sending your message. If a user’s name is selected, and you want to post a message to all • users, select All Users prior to sending a message. If a user has d...
Page 40 - Virtual Media
Instruction Manual 36 Show / Hide (User List): When you hide the User List, the User List panel closes. The button is shadowed when the User List is open Exit: Click to close the message board Please Note: Only users who are currently logged on can see the Mes-sage Board - it is not visible on the l...
Page 41 - The Java Applet
Instruction Manual 37 From the remote computer click on the Virtual Media icon in the Windows Client Control Panel, this opens the Virtual Media Connection dialog box:Please Note: More than one USB mass storage device may be connect-ed and recognized, but only the unit selected can be accessed. Drop...
Page 42 - Navigation
Instruction Manual 38 work, once your configuration has been proven, the Internet connection will be covered.To connect from your local network: Ensure the “remote” computer is connected to your network. 1. Ensure the SV1107IPEXT is connected to your local network and to 2. the local computer Start ...
Page 43 - The Java Applet Toolbar
Instruction Manual 39 The Java Applet Toolbar The Java Applet’s toolbar provides utilities to help you control remote KVM operations. Please Note: The tool bar is hidden in the blank area at the bottom cen-ter of the screen, and appears when you move the mouse pointer over the area.The Tool Bar Icon...
Page 44 - Video Settings dialog box:
Instruction Manual 40 Set Video Parameters:Clicking on this button brings up the Video Settings dialog box: Please Note: We recommend that you perform Auto sync immediately following connection, to ensure proper mouse synchronization. KeypadSince some local input keyboard combinations cannot be capt...
Page 47 - Please Note: The above step will only notify you of the address
Instruction Manual 43 If you have assigned a static IP address to the SV1107IPEXT, this step 1. can be skipped. The SV1107IPEXT features IP Change Notification, which will automatically send an e-mail to your preferred address, notifying you of the new IP Address. Fill out the form (contact your ISP...
Page 48 - Computer Name and select the SV1107IPEXT by name.
Instruction Manual 44 If you are using Automatic addressing, click on the drop down arrow labeled Computer Name and select the SV1107IPEXT by name. In the 6. Ports to Open [TCP] space, enter 9000, 9002 (or the port numbers you chose) and set the schedule. Activate Port Forwarding by placing an X in ...
Page 49 - Troubleshooting; General Operation; Java Applet will not connect to the SV1107IPEXT
Instruction Manual 45 Troubleshooting General Operation SV1107IPEXT is acting erratically:Press and hold the Reset button for at least three seconds My Virtual Media device is set to “read only” under Windows Vista™ and cannot be made writable:Due to Windows Vista™ security features, no data can be ...
Page 50 - Additional Mouse Synchronization Proce-; The Windows Client; Keep Screen Size. See the discussion under Keep Screen Size
Instruction Manual 46 When I log in, the browser generates a CA Root certificate is not trusted, or a Certificate Error responseThe certificate name is not found on Microsoft’s list of Trusted Authorities. The certificate can be trusted. For mouse problems, see Additional Mouse Synchronization Proce...
Page 51 - Mouse Synchronization Procedures
Instruction Manual 47 Mouse Synchronization Procedures If the mouse synchronization procedures mentioned in the manual fail to resolve mouse pointer problems for particular computers, try the follow-ing:Note: These procedures are to be performed on the computers attached to 1. the SV1107IPEXT ports ...
Page 53 - Technical Support
Instruction Manual 49 Technical Support StarTech.com’s lifetime technical support is an integral part of our commit-ment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentatio...
