StarTech.com RK1236BKF - Manual
StarTech.com RK1236BKF – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Instruction Manual
DE:
Bedienungsanleitung - de.startech.com
FR:
Guide de l'utilisateur - fr.startech.com
ES:
Guía del usuario - es.startech.com
IT:
Guida per l'uso - it.startech.com
NL:
Gebruiksaanwijzing - nl.startech.com
PT:
Guia do usuário - pt.startech.com
Manual Revision: 06/21/2012
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1 x Top Panel
• 3 x Bottom Panel
• 4 x Cross Brace
• 2 x Side Panel and frame
• 8 x Plastic Corner Caps
• 4 x Adjustable Feet
• 4 x Casters
• 2 x Allen Wrench (small, large)
• 1 x Assembly screw kit (M4, M5, M6, M8)
• 1 x Bag of M6 Cabinet Screws and Nuts
• 2 x Sets of keys
Required Tools
• Phillips (crosshead) screwdriver
• Adjustable wrench
RK1236BKF
12U 36in Knock-Down Server Rack Cabinet with Casters
Installation
Frame Assembly
1. Connect the two side frames (with side doors) together using the
4 cross braces at each corner. Fasten using a large silver hex screw
(M8) at each end of the brace with the large Allen Wrench. Ensure
that the “fin” on the cross brace faces inwards. Attach the cross
braces to one side first, then attach the second side frame to the
braces.
NOTE:
Make sure that the two side frames are right side up. Check
that the lock and latches on the side doors are on the same end as
well as the markings on the inner rack posts.
WARNING:
Before proceeding, ensure that
ALL
hex screws are
tightly wrench-torqued to prevent accidental loosening during use.
Corner Joints
Side Panel Lock
Cross Brace
Cross Brace
Large Hex Screw
*installation photos for reference only
WARNING!
To prevent bodily injury, please ensure that the rack
is installed in a structurally sound environment with a level floor
and that all hardware has been assembled securely, and checked for
stability before loading equipment. When installing equipment into
the rack, start from the bottom of the rack first and move upwards,
keeping the heaviest equipment at the bottom to avoid a situation
where the rack becomes top-heavy.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
