StarTech.com PCI2S232485I - Manual
StarTech.com PCI2S232485I – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Table of Contents
- Page 4 – Introduction; Packaging Contents; System Requirements; Installation; Hardware Installation
- Page 5 – Driver Installation
- Page 6 – How to Use; Mode Settings
- Page 7 – Transmission Echo
- Page 8 – Termination Resistor
- Page 9 – Pinout Diagram
- Page 10 – Specifications
- Page 11 – Technical Support
Manual Revision: 12/08/2011
For the most up-to-date information, please visit: www.startech.com
DE:
Bedienungsanleitung - de.startech.com
FR:
Guide de l'utilisateur - fr.startech.com
ES:
Guía del usuario - es.startech.com
IT:
Guida per l'uso - it.startech.com
NL:
Gebruiksaanwijzing - nl.startech.com
PT:
Guia do usuário - pt.startech.com
PCI2S232485I
2 Port RS232/422/485 PCI Serial Adapter
Card ESD Protection
*actual product may vary from photos
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Instruction Manual i Table of Contents Introduction ............................................................................................ 1 Packaging Contents ................................................................................................................................. 1Sys...
Instruction Manual 1 Introduction The StarTech.com PCI to RS232/422/485 Serial Adapter Card is a universal all-in-one PCI Serial adapter card that allows you to turn a PCI or PCI-X slot into 2 serial ports capable of communicating in RS-232, RS-422, or RS-485. Featuring 2,500Vrms Isolation and 15KV ...
Instruction Manual 2 4. Set the jumpers on the card to the desired configuration. See “How to Use” section for jumper descriptions. 5. Insert the card into the open PCI or PCI-X slot and fasten the card’s bracket to the rear of the case. 6. Place the cover back onto the computer case.7. Insert the p...
