Star Manufacturing GR10 - Manual

Page 2 - RETAIN THIS MANUAL FOR FUTURE REFERENCE; NOTICE; MAINTENANCE AND REPAIRS; SAFETY SYMBOL; The Star Service Help Desk; Reference the listing provided with the unit

2 2 These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance. RETAIN THIS MANUAL FOR FUTURE REFERENCE NOTICE Using any part other than genuine Star factory supplied parts relieves the manufacturer of all...

Page 3 - PRODUCT IDENTIFICATION; continued on page 4

3 GR10-120V- Smooth Top and Bottom Platens Aluminum, without Timer GR10-120VC-Smooth Top and Bottom Platens Aluminum, without Timer Canadian GR10T-120V- Smooth Top and Bottom Platens Aluminum, with Timer GR10T-120VC-Smooth Top and Bottom Platens Aluminum with Timer Canadian GR10-240V- Smooth Top and...

Page 4 - PRODUCT IDENTIFICATION - Continued

4 CG14T-120V- Aluminum Grooved Top and Bottom Platens, with Timer CG14T-120VC-Aluminum Grooved Top and Bottom Platens, with Timer Canadian CG14-240V- Aluminum Grooved Top and Bottom Platens , no Timer CG14T-240V-Aluminum Grooved Top and Bottom Platens, with Timer GR14-240V- Aluminum Smooth Top and B...

Page 6 - INITIAL START UP; SEASONING THE COOKING SURFACES (NON CHROME SURFACES); FIRST TIME SEASONING

6 Note: For Canada, 120 volt units listed above have NEMA 5-20P plug. Model No. Volts Rated Wattage Amps NEMA Plug GR 14 120 1800 15 5-15P GR 14 240 1800 7.5 6-15P CG 14 120 1800 15 5-15P CG 14 240 1800 7.5 6-15P GR 14I 240 3600 15 6-20P CG14I 120 1800 15 5-15P CG 14I 240 3600 15 6-20P CG 14IGT 240 ...

Page 7 - SETTING THE TEMPERATURE; KNOB SETTING; Knob Position; DAILY OPERATION

7 SETTING THE TEMPERATURE The thermostat control knob is used to set the temperature to your requirements. The maximum set point is 550°F (288°C), the minimum set point is 175°F (79°C). See Knob Settings. SETTING THE TIMER (TIMER MODELS ONLY) (9 MIN. 59 SEC. MAX) The timer may be factory pre-set. If...

Page 8 - OPERATING HINTS AND SAFETY; Do not leave the unit in operation without an attendant.; MONTHLY LUBRICATION/INSPECTION; CARBON CLEANING; CAUTION; DO NOT IMMERSE OR LET THE UNIT STAND IN WATER.

8 OPERATING HINTS AND SAFETY Disconnect power to the unit with the switch at the end of each day of operation. Do not leave the unit in operation without an attendant. Turn thermostat down to 200°F (93°C) during idle periods. It will take only a few minutes to regain operating temperature. Use spatu...

Page 9 - WARNING; DO NOT; CHROME SURFACE LIMITED WARRANTY EXCLUSIONS; OPERATION TROUBLESHOOTING

9 WARNING Do not use ice or cold water to clean the cooking surfaces when the unit is hot. The surfaces are cast aluminum or cast iron and may crack or deform under the shock of rapid temperature change. CLEANING (CHROME SURFACES) It takes very little time and effort to keep this Industrial Chromium...

Page 11 - ST

11 (ELEMENT O MAS BAJO) BOTT OM ELEMENT (ELEMENT O MAS AL TO ) T O P ELEMENT 5-15P PLUG STD (NEGRO) BLACK (VERDE) GREEN (BLANCO) WHITE T- S T A T FRONT CONTROL P A NEL WIRE NO P ART NO. (HILO NO.) (P ARTE NO.) QTY . (CANTIDAD) 1 D9-GR0103 1 2 D9-GR0104 1 3 D9-GR0105 1 PILOT LIGHT (BLOQUE TERMINAL) T...

Page 14 - WITH TIMER; STAR MANUFACTURING INTERNATIONAL INC.

14 B A C D GREEN BLACK WHITE 15 AMP PLUG NEMA 5-15P ON ALL 120V UNITS. NEMA 6-15P ON 240V, 1,800 WATT UNITS. 20 AMP PLUG NEMA 6-20P ON 240V, 3,600 WATT UNITS. TOP ELEMENT TRANSFORMER TERMINAL BLOCK FOR REFERENCE WIRING DIAGRAM IS SHOWN AS UNIT IS ASSEMBLED WITH THE BOTTOM PLATE REMOVED. ITEMS ARE IN...

Page 16 - PARTS LIST

16 PARTS LIST June 22, 2006, Rev. K 10' TWO SIDED GRILLS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER OF Some items are included for illustrative purposes only and in certain instances may not be available. Number Per Unit Description Model MODEL Par...

Star Manufacturing GR10 - Manual

Table of Contents:

Summary

Other Star Manufacturing Models