Star Manufacturing CG28 - Manual

Page 2 - RETAIN THIS MANUAL FOR FUTURE REFERENCE; NOTICE; connection with such use.; MAINTENANCE AND REPAIRS; SAFETY SYMBOL

2 These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance. RETAIN THIS MANUAL FOR FUTURE REFERENCE NOTICE Using any part other than genuine Star factory supplied parts relieves the manufacturer of all l...

Page 3 - PRODUCT IDENTIFICATION

GR10-230V- Smooth Top and Bottom Platens Aluminum, without Timer GR10T-230V- Smooth Top and Bottom Platens Aluminum, with Timer GR10I-230V- Smooth Top and Bottom Platens Cast Iron, without Timer GR10IT-230V- Smooth Top and Bottom Platens Cast Iron, with Timer CG10I-230V- Grooved Top and Bottom Plate...

Page 4 - The installation of any components such as; GENERAL INSTALLATION DATA; Before using your new equipment, read

VENTILATION AND CLEARANCES The installation of any components such as a vent hood, grease extractors, and/or fire extinguishing systems, must conform to their applicable nationally recognized installation standards and/or local building codes. ELECTRICAL CONNECTION GENERAL INSTALLATION DATA CAUTION ...

Page 5 - INITIAL START UP; Before using the unit for the first time, clean and; SEASONING THE COOKING SURFACES; first apply into a cup and then brush onto; DAILY SEASONING; SETTING THE TEMPERATURE; KNOB SETTING; Knob Position

ELECTRICAL SPECIFICATIONS Model No. Volts Rated Wattage Amps NEMA Plug GR 10 230 1653 7.2 CEE-7/VII GR 10I 230 1653 7.2 CEE-7/VII CG 10I 230 1653 7.2 CEE-7/VII GR 14 230 1653 7.2 CEE-7/VII GR 14I 230 3306 14.2 CEE-7/VII CG 14 230 1653 7.2 CEE-7/VII CG 14I 230 3306 14.2 CEE-7/VII CG 28I 230 6612 28.7...

Page 6 - DAILY OPERATION; to allow sufficient preheat time will result in; OPERATING HINTS AND SAFETY; food particles and grease film to carbonize.; MONTHLY LUBRICATION/INSPECTION; cooking efficiency.; CAUTION

ON/OFF ROCKER SWITCH(TIMER MODELS ONLY) The switch turns the unit on and off. The switch has three positions: With the switch in this position, both top and bottom platens will heat. With the switch in this position, neither platen will heat. With the switch in this position only bottom platen will ...

Page 7 - CARBON CLEANING; WARNING; . Check if unit is plugged in correct; DO NOT SPLASH FRONT CONTROL

CLEANING CON'T CAUTION DO NOT USE SHARP OBJECTS TO REMOVE CARBON BUILD-UP. BEFORE CLEANING MAKE SURE POWER IS TURNED OFF, UNIT IS UNPLUGGED AND IS NOT TOO HOT. While holding top lid with one hand, apply only cleaners which are safe for aluminum and iron surfaces. Wipe with clean sponge or towel unti...

Page 12 - WITH TIMER; STAR MANUFACTURING INTERNATIONAL INC.

GREEN BLACK WHITE 15 AMP PLUG NEMA 5-15P ON ALL 120V UNITS. NEMA 6-15P ON 240V, 1,800 WATT UNITS. 20 AMP PLUG NEMA 6-20P ON 240V, 3,600 WATT UNITS. TOP ELEMENT TRANSFORMER TERMINAL BLOCK FOR REFERENCE WIRING DIAGRAM IS SHOWN AS UNIT IS ASSEMBLED WITH THE BOTTOM PLATE REMOVED. ITEMS ARE IN GENERAL LO...

Page 13 - ST

(ELEMENTO MAS BAJO) BOTTOM ELEMENT (ELEMENTO MAS ALTO) TOP ELEMENT WIRE NO PART NO. (HILO NO.) (PARTE NO.) QTY. (CANTIDAD) 4 D9-GR0058 1 2,5 D9-GR0059 1 1,8 D9-GR0060 1 3,6,7 D9-GR0064 1 10 D9-GR0057 1 9 D9-GR0065 1 11 D9-GR0106 1 12 D9-GR0107 1 (ELEMENTO MAS ALTO) TOP ELEMENT (ELEMENTO MAS BAJO) BO...

Page 16 - PARTS LIST; IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE DESIRED; INCLUDE MODEL AND SERIAL NUMBER

PARTS LIST November 18, 2009, Rev D 10' TWO SIDED GRILLS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER OF Some items are included for illustrative purposes only and in certain instances may not be available. Number Per Unit Description Model MODEL Par...

Page 24 - STAR MANUFACTURING GROUP

STAR MANUFACTURING GROUP Star - Holman - Lang - Wells - Bloomfield - Toastmaster 10 Sunnen Drive, St. Louis, MO 63143 U.S.A. (800) 807-9054 (314) 781-2777 Parts & Service (800) 807-9054 www.star-mfg.com

Star Manufacturing CG28 - Manual

Table of Contents:

Summary

Other Star Manufacturing Models