SPT SR-142Y - User Manual

10cm

10cm

Iron Enamelware

Cast Iron

Iron/Steel Frying Pan

Magnetic Stainless Steel Pot

Iron Tray/Grille

Uneven bottom

Glass

Ceramic

Less than 4” diameter

1 H O W TO U S E

2 S A F E G U A R D S

3 C O O K WA R E S

4 I N S TA L L AT I O N

5 S A F E T Y P O I N T S

Do not immerse cord or appliance in

water or other liquid; or use in a wet

outdoor environment

Do not use on or near a hot gas or

electric burner

Place unit on a leveled surface and

with at least 4 inches of clearance all

around

May cause interference to radio or

television reception if placed within

close proximity.

Due to the magnetic heating of the

unit, keep objects that may be affected

away, such as credit card, watch, etc.

Do not share outlet with other

appliances.

The ceramic plate will retain heat

from the cookware; never touch the

ceramic plate immediately after use.

Do not damage the ceramic plate. Be

careful not to drop anything onto the

ceramic plate. If the plate is broken or

cracked, stop using immediately. Turn

unit off and unplug.

Do not place paper or cloth in between

the cooktop and cookware

Never pour hot oil into cookware that is in

use on the cooktop.

Unplug and let cool before cleaning.

Wipe surface with damp cloth. If

excessively dirty, soak cloth in a mild

detergent and water mixture.

Do not clean with metal scouring

pads, abrasives or solvents.

Do not immerser cord or unit in water

or other liquids.

Do not heat aluminum foil on the

cooktop.

Unsuitable cookware forms and shapes.

Suitable cookware: 4.7” minimum diameter with a flat surface.

Do not heat unopened cans of food.

The container could explode.

Never insert foreign objects into the

air inlet or outlet vents.

Do not heat empty containers on the

cooktop.

Do not place metal objects (forks,

knives, lid, etc) on the cooktop other

than cookware. They may become

very hot during cooking.

This unit emits an electromagnetic

field. People with pacemakers should

consult with their physician before

using.

6 M A I N T E N A N C E

7 T R O U B L E S H O O T

8 S P E C I F I C AT I O N

9 WA R R A N T Y

WARNING

Buit-in Installation - Cut-out opening:
9.76 in x 8.19 in
(248x208 mm)

WARNING

Κ

Exhasut vent should have a minimum 4” of clearance.

*Flush mount available as optional purchase, Model: AP-1937.
Please visit www.spt-usa.com or call 1-800-330-0388.

Dpvoufs

Qpxfs!Dpse

Voju

Unstuitable cookware: Less than 4” diameter.

OPERATION

CERAMIC
PLATE

AIR INLET

AIR
EXHAUST

G

C O N T R O L PA N E L

Mini Induction Cooktop

with Smart-Fry Function

SR-142Y

INSTRUCTIONS MANUAL

Your Guarantee

If this product is found to be faulty as a result of faulty
materials or workmanship within one year from date
of purchase, it will be repaired free of charge.

This guarantee is subject to the following terms:
· Sunpentown must be notified of the fault.
· Proof of purchase must be presented to
Sunpentown’s nominated representative.
· The warranty will be void if the product if modified,
misused or repaired by an unauthorized person.
· The warranty after repair will not be extended
beyond the original one-year period.
· All replacement parts will be new or reconditioned.
· Parts, which are replaced, become the property of
Sunpentown.
· The warranty applies for the use of the product in
the USA only.

What is NOT COVERED:
· Warranty does not include freight charges.
· Incidental or consequential damage caused by
possible defects with this product.
· Damage to product caused by improper power
supply voltage, accident, fire, floods or acts of
nature.
· Failure of product resulting from unauthorized
modifications to the product.
· Improper installation or failure to perform the
necessary maintenance.

This GUARANTEE is in addition to your Statutory Rights

SUNPENTOWN INTERNATIONAL INC.

14625 Clark Ave. City of Industry, CA 91745

Tel: 800-330-0388

[email protected]

POWER
CORD

1. Plug in power cord, unit will beep to indicate power.
2. ON/OFF button
▪ Press to turn on unit.
▪ Indicator light under Power Level travels back and forth.
▪ Press again to turn unit off. Note: Fan will continue to run
until unit is cooled down.
3. Press either - or + and Power Level indicator will stop in the
middle. Press - or + again to set desired power level.
4. Smart-Fry function
▪ This innovative function detects the type of cookware used
and heats to the optimal temperature for pan-fry or searing
(steak, pork chop, fish, etc).
▪ Flashing indicator light means unit is pre-heating.
▪ When the indicator light stops flashing, temperature has
been reached and food can be added to start cooking.
▪ Smart-Fry senses temperature changes within the cookware.
If food is added or removed, unit will adjust accordingly to
maintain that optimal temperature. User can cook (multiple
steaks, for example) continuously without worring about the
pan getting too hot.
▪ Actual cooking time and when to flip depends on how well to
cook the food.
▪ Under Smart-Fry function, other buttons are non-responsive,
except ON/OFF button.
▪ Cookware must have a flat bottom that comes in complete
contact with the induction.
▪ For pan-fry/searing, best to use cast iron cookware with a
minimum 4mm thickness.
▪ If cookware is removed for more than 5 seconds or unit is turned
off, will need to wait until unit cools off before using the Smart-
Fry function again.

ON/OFF
BUTTON

SMART-FRY
FUNCTION

POWER LEVEL

INDICATOR

DECREASE / INCREASE

POWER LEVEL BUTTONS

Magnetic Stainless

Steel/Enamel

Aluminum or Copper Pots

mild

detergent

solvent

MODEL

VOLTAGE

POWER

NET WEIGHT

CORD LENGTH

DIMENSION

SR-142Y

120V / 60Hz

1400W / 11.8A

4.63 LBS

4.8 FT

10.43L x 8.86W x 3.35H inches

If after reviewing the above and problem is not resolved, do not
attempt to repair yourself. Contact Sunpentown Customer Service:
800-330-0388

PROBLEM

CHECK

Is cooktop firmly plugged into a
correct outlet?
Please check the circuit breaker.

Using a suitable cookware?
Pan may not be centered or smaller
than 4 inches.

No power or unit does
not respond.

Indicator light flashes
and does not heat

Unit suddenly stops
heating during
operation

Are the air vents blocked? Check if
dust or grease is clogging the vents.
Check if the fan is still running.
Unit overheated and the auto shut-off
protection kicked in. Wait for unit to
cool down.