Page 2 - Warning; Electric Safety; To reduce risk of fire or electrical shock,; Caution; Install the battery correctly to avoid risk of an explosion.
2 Warning Electric Safety To reduce risk of fire or electrical shock, Do not expose this product to rain or any moisture. Caution Install the battery correctly to avoid risk of an explosion. Align the battery properly and use only the same type of batteries as recommended by manufacturer Dispose of ...
Page 3 - Cautions; Signs of Caution and Warning; or installed properly.; How to handle lithium battery; Important Safeguards
3 Cautions Read all of the instructions and safety information before you plug your DVR into a wall socket. Signs of Caution and Warning Warning: This sign indicates that the user could die or wounded seriously if not used or installed properly . Caution: This sign indicates that the user could be w...
Page 4 - Power Management
4 3. Do not touch the product or the power plug, when there is thunder. It may become a reason for electric shock. 4. Do not install the product near or on top of heating system. The internal temperature of the product would be more than what is allowed and it may become a reason for malfunction or ...
Page 5 - Table of Contents; VCR
5 Table of Contents 1. SYSTEM STRUCTURE ............................................................................................................................................................... 6 1.1 DVR-PC8/16 S ERIES ..............................................................................
Page 6 - SYSTEM STRUCTURE; Series; Qty
6 1. SYSTEM STRUCTURE Before going any further, be sure that you have received the following items with your DVR. Components may vary according to your model and local area. Your DVR-PC8/16 Series DVR includes the following components. Carefully inspect each component to make sure nothing is missing...
Page 7 - System Configuration; Functions
7 2. System Configuration 2.1 DVR-PC8/16 Series Front Panel DVR-PC8/16 No. Functions No. Functions 1 Power Button & Power LED 5 SD/MMC Port 2 HDD LED 6 USB Port 3 Network LED 7 CD-RW / DVD-RW (Option) 4 Instant Playback 8 Eject Button 2.1.1. Power Button To turn your DVR, press the power button ...
Page 9 - DVR-PC8 Series Installation; Install in well-ventilated places for system heat prevention.; Note
9 3. INSTALLATION 3.1 DVR-PC8 Series Installation This section describes how to connect peripheral devices to DVR-PC8. Connect the peripheral devices by following instruction as below. (The connections might vary according to the components of product model and the chosen specifications of the user)...
Page 11 - DVR-PC16 Series Installation
11 3.2 DVR-PC16 Series Installation USB Ports No. Functions No. Functions 1 Power Selection Switch 9 MIC Input 2 Power Connection Circuit 10 Speaker Output 3 Mouse Port 11 Alarm Input/Output Port/PTZ Port 4 Keyboard Port 12 Spot Monitor Output (RCA Jack) 5 Printer Port 6 PC Monitor Output (VGA) 7 US...
Page 12 - Power Connection; Division
12 4. Basic Operation 4.1 Power Connection Check the connection of the peripheral devices of the system and connect the power. When the power cord is connected, The system’s program will start. To end the program, wait until the booting is completed and press the power button on the front panel. 4.2...
Page 13 - To Start Recording
13 4.3 To Start Recording 1 2 3 4.3.1. Start Recording [ ] When the power is connected to the system, recording will start automatically after 3secs. But if recording does not start, press the [Start Recording] button. 4.3.2. Stop Recording [ ] Click [Stop Recording] button if recording is not requi...
Page 15 - Search Recorded Image
15 4.4 Search Recorded Image Press the [Viewer] button on the main screen, enter a password and a confirm password and then a screen layout as shown below will appear. Recorded images can be played back easily by date, time and camera. 4.4.1. Search recorded image by Date 1) Select the year/ month/ ...
Page 16 - Screen; Name
16 5. Screen Layout 5.1 Main Screen 1 2 3 6 5 7 8 9 10 15 16 4 12 17 14 11 13 No. Name No. Name 1 Current Recording Screen 10 Audio Input Indicator 2 Camera Channel 11 Start Recording 3 Split Screen Mode 12 Stop Recording 4 Control (Alarm Output) 13 Search Recorded Image (Viewer) 5 System Informatio...
Page 19 - The indicator flashes when the alarm sensor is operating.; When all channels are in “Watch Mode,” they are not recording.
19 5.1.8. Sensor Event Indicator The indicator flashes when the alarm sensor is operating. Note Double click the sensor indicator with the left mouse button to start the Log Viewer. The log viewer shows the list of occurred events by date and type of the event. This information can be printed or sen...
Page 22 - Set the password for Login. Refer to “Setup
22 5.1.16. Tools Press the Tools button and a menu to adjust the picture quality of the screen, remote connection and sensor activating log file and also Log In/Log out will appear. Remote login The remote transmission indicator flashes while it is connected to the Agent Series, remote surveillance ...
Page 25 - backwards
25 5.2.5. Search Calendar Select the date to search the recorded images. Press arrow button from each category to select the date. Select Yr/Month/Day/Time and press [Search] button. Also, click the below calendar to search the date. The date with recorded images will be indicated in pink color and ...
Page 26 - End the searched screen and go back to the main screen.
26 5.2.9. Adjust Audio Playback Adjust the audio volume for audio playback. If the volume cannot be adjusted, check the device administrator after ending the program. Click the Speaker button if the audio is not required and press it again to allow for audio playback. The recorded audio can be heard...
Page 27 - event occurred, will appear in the screen.
27 5.2.11. Zoom In/Out After clicking the button, select the screen for zoom in/out. Click the left button of the mouse and the screen will enlarge. The screen will diminish when the right side is clicked. The users can Zoom In/Out using wheel mouse if installed . 5.2.12. Panorama This function enab...
Page 28 - 40, where vertical resolution is reduced in half, removes
28 5.2.14. Adjust Picture Quality Click Image Adjust button to adjust the searched screen. Select each functions and it can be seen directly in the searched screen. 1. Grayscale: Make the screen black and white. 2. Equalize Contrast: Equalize the brightness and darkness. 3. Lowpass Filter: Delete hi...
Page 29 - Tools
29 5.3 Search Tools 5.3.1. SmartSearch How to Use SmartSearch 1. Select the channel desired to search in the Viewer to 1-channel mode. 2. Press the SmartSearch button. 3. The system will require a password if the file you searched for contains a password. 4. Set the time you require. The image for t...
Page 32 - Print the image of the playback screen by the printer.; List; Shows search result lists.; Search Result List
32 Save Screen [ ] Save the image on the playback screen as BMP or JPG file. Print [ ] Print the image of the playback screen by the printer. 5.3.1.8. Search List Search List Shows search result lists. Erase List Erase all the search results. Search Result List When there is a movement from the set ...
Page 33 - The Basic Method to Use the APP; window will be saved or printed.; APP Screen Layout; Processing
33 5.3.2. APP The Basic Method to Use the APP 1. Select the channel desired to process in APP in the Viewer to 1-channel mode. 2. [APP] button is activated when moving to previous hour range by pressing [Search Previous Hour] button in the Viewer. 3. Click the [APP] button. 4. It will ask for file p...
Page 37 - appear to set desired date, camera number, time and backup path.
37 5.3.3. Backup Select the time and save the image in the backup device. These files can be called up in the normal PC (window based). Note Backup device supported by the viewer are CD-RW and DVD-RW, and USB for the interface. To add additional backup device, inquire from the buyer or dealer. To ba...
Page 38 - Video Backup; To save image by Partial Image Backup,
38 Video Backup To save image by Partial Image Backup, 1. Search recording image to save. 2. Click [Pause] button after searching recorded image. 3. Select Partial Image Backup tap. 4. Select the camera number of the screen to save. 5. Choose a saving method (DSF, MPEG). 6. Select the path to save t...
Page 39 - Add Printer; connected to the DVR.; Search Option
39 5.3.6. Configure Add Printer Click [Add Printer] button to install new printer. 1. Click [Add Printer] button to use the [Add Printer Wizard] to add the new printer. 2. Select printer location. Select local printer when the printer is directly connected to the DVR. 3. Select the manufacturer and ...
Page 40 - Setting Customized Functions; Setting; Security Screen Mode
40 6. Setting Customized Functions Press the [Setup] button on the system’s main screen and various functions for the system can be set on the Preference Window comprised with 9 tabs. 6.1 Camera Setting 6.1.1. Selecting Camera Select a camera for desired time, motion detection range, image quality, ...
Page 42 - DVR is always in continuous recording.
42 6.1.6. Motion Detection Area Motion detection area can be selected on the motion detection area screen after the checkmark on the “All Ranges” selection is turned off. 1. Click the left mouse once: One field box is created. 2. Click left mouse and drag: Field box is created following the directio...
Page 45 - Following events are notified to the RemoteAgent.; Add
45 6.2.5. Remote Event Notification Allow notification of events to RemoteAgent. DVR can notify to RemoteAgent even though it is not connected. Note Following events are notified to the RemoteAgent. 1. During sensor event (notifies event or connects channel) 2. Stop/start recording 3. Abnormal camer...
Page 49 - Numbers can be changed by the number of camera channels.
49 6.3.9. Video loss Detection Video loss Detection Select this category and the screen title will appear as “Video loss” when the camera cable is disconnected or cut. The alarm time will follow Sensor Recording Time. Recording Failure Alarm Turn on sensor output Number 7 (located second to the end)...
Page 50 - Click on this check box to enable PTZ functions.
50 6.4 PTZ This setting tap is for camera control. Note The manual may differ because the control functions vary between the manufacturers or by the products used. The manual provides the standard model. 6.4.1. Use PTZ Select this category to use the camera controller for Pan (left right) / Tilt (up...
Page 51 - To install new camera protocol, select “Add PTZ Protocol”
51 6.4.5. Add PTZ Protocol To install new camera protocol, select “Add PTZ Protocol” Port Select the port to install PTZ protocol. Selectable port appears when arrow button is pressed. 6.4.6. Current View Show the current viewing screen of the chosen camera. See this screen to control the location o...
Page 52 - : Click on the diagonal arrow buttons to move the camera to each
52 6.4.8. Pan/Tilt : Click on the up arrow button to Tilt the camera in upward direction until the desired angle is reached. : Click on the down arrow button to Tilt the camera in downward direction until the desired angle is reached. : Click on the left button to Pan the camera left until the desir...
Page 54 - To operate an installed heater, press on the Heater icon.
54 Light The exterior light will be kept on for the duration of entered preset time and automatically shut off when the preset operating time expires. Alarm The alarm will be kept on duration of entered preset time and automatically shut off when the preset operating time expires. Wiper [ ] To opera...
Page 57 - Export; Call up the user category which is made up of UserList.dul file.
57 6.6.2. User Management Set up the login and password when logging into the main menu. By clicking [Manage] button, window to set up the user name and password appears. The system users can be managed by selecting [User Management] button. The administrator (admin) set as default can add, edit, re...
Page 58 - Use Audio; User can Enable/Disable the Main Equalizer (; Video Compression
58 6.6.4. Recording Resolution Shows the present recording resolution size set among “320 × 240”, “640 × 240”, “640 × 480” mode. To adjust the recording resolution, stop recording first. 6.6.5. Audio/Graphic Equalizer/Select Language. Use Audio User can On/Off the audio recording. Use Graphic Equali...
Page 59 - Return to the default setting.
59 6.6.9. Display Division Select a screen mode from 1, 4, 9, 10, 13, 16-split mode. Camera Sequence Selection Select the order of display cameras. The orders are different according to a recording screen mode selected. To select 4-Split Screen Mode Select 4-screen split mode, decide the sequence to...
Page 61 - FPS Setting per Camera
61 6.7 FPS/Resolution Adjust the frame for each channel of the DVR with this menu. (On the DVR-PC8/16 Series, recording frame setting can be adjusted but it does not support resolution setting per camera.) 6.7.1. FPS and Resolution Setting per Camera To use this setting, the recording should be stop...
Page 62 - Record Option; change in color and the list to set will appear.; Copy
62 6.8 Schedule In this menu, the recorded method per camera can be selected and a schedule may be created for each camera on an hourly basis. To use this category, [Stop Recording] button on the main screen had to be pressed to stop the recordings. 6.8.1. Use Schedule Stop the recording by pressing...
Page 63 - Similar to Continuous Mode and the sensor is activated.
63 Motion Detection(M): Records only when there is movement. Refer to setting value to see motion sensitivity when there is detection of movement. The sensor is not activated. Continuous(C): Ignores images captured by the selected camera and records all the images. The sensor is not activated. M, S:...
Page 64 - Delete the categories of the selected list.
64 Edit Adding schedule to all the frames can be accomplished but only frame schedule can be edited for a select day. Click [Edit] button and “FPS Schedule Add” window will appear. The setting method is same with [Add] category. Delete Delete the categories of the selected list. Default Set the fram...
Page 68 - Digital Deterrent; Enable Voice Guard; Import; Voice Hold Tim; voice hold time
68 6.10 Digital Deterrent You can hear sound of the stored WAV file when ‘ Enable Voice Guard ’ is checked and a motion sensor is operating. Import You can also store the WAV file of each channel separately by clicking ‘ Import ’ button. Voice Hold Tim : Upon selecting ‘ voice hold time ’ , you can ...
Page 69 - Instant Playback; Play or Pause
69 7. Instant Playback This is a feature, ideal for users, who are familiar with a VCR. By using VCR buttons, you can quickly and conveniently search and play stored video files. In addition, it provides a feature that enables (file) backup to a preferred media (USB memory stick/ memory card/CD) whi...
Page 71 - VCR Playback and Record Mode; While the video file is being played in the playback view, press [
71 7.2 VCR Playback and Record Mode 7.2.1. [ ] Rewind If you press [ ] button in playback view, the stored files are played backward at twice the normal speed (2x speed). If you press [ ] again, it will play backward four times (4x) to eight times (8x) the normal speed. After 8x speed, you can selec...
Page 73 - a) Select single channel
73 7.2.6. [ ] Camera If you press [ ] button in playback view, a window, where you can select [Single screen mode] and [Multi-screen mode], appears. If you select [Single screen mode], you can watch one screen, and if you select [Multi screen mode], you can watch screens in numbers of 4, 9 and 16. a...
Page 75 - VCR Record Mode; REC
75 7.3 VCR Record Mode a) When you press [ ] button, a list appears for the possible storage media you can record in current DVR. Upon selecting the desirable storage media, the recording begins. b) When the recording begins, a “ REC ” sign in red appears in top right corner of the screen. c) If you...
Page 76 - VCR Playback Mode; ] button in order to see a file directory.
76 7.4 VCR Playback Mode In VCR Play Mode, [ ], [ ] buttons cannot be used, and you can only watch one channel. At initial play, a file directory appears for your selection. Afterward, you will need to press [ ] button in order to see a file directory. When you press [ ] button, [OPEN FILELIST] and ...
Page 77 - Pin Assignment of Alarm Port; ; -Sub connector on the rear panel is male straight type.
77 8. APPENDIX 8.1 Pin Assignment of Alarm Port Refer to the pictures for connecting the pin assignment of alarm port. (DVR-PC8 Series) Refer to the pictures for connecting the pin assignment of alarm port. (DVR-PC16 Series) Alarm In: 4, Alarm Out: 2 <Pin Assignment> <Pin Description> &l...
Page 78 - TCP/IP Port Setting Method using the firewall.; Connection for server diagnosis: 8002
78 Block Diagram for Alarm Input 1. Sensor Input: Normal Open (N/O), Normal Close (N/C) 2. Line impedance of cables should be less than 20 Ω . Block Diagram for Alarm Out 1. Alarm Out: Normal Open (N/O) 2. Maximum should be under DC24V 2A. 8.2 TCP/IP Port Setting Method using the firewall. There is ...
