SOYO SY-6IEM - Manual - manualsarea.com

SOYO ™ 2 SY-6IEM Mainboard Pentium ® II & Celeron ™ processors 82440 EX/LX AGP/PCI Mainboard66MHz Front Side Bus supportedMicro-ATX Form Factor Copyright © 1998 by Soyo Computer Inc. Trademarks:Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of theirowners. P...

Page 3 - Introduction; SY-6IEM Mainboard. This Quick Start Guide; Unpacking

SY-6IEM Quick Start Guide 3 Introduction 1 1 Introduction Congratulations on your purchase of the SY-6IEM Mainboard. This Quick Start Guide describes the steps for installing and setting up your new mainboard. This guide is designed for all users to provide the basic steps of mainboard setting andop...

Page 4 - SY-6IEM Mainboard Layout; Intel

SY-6IEM Quick Start Guide 4 Introduction SY-6IEM Mainboard Layout Key Features Ø Supports Intel Pentium ® II processors (233-333MHz) & Celeron ™ processors (266-366MHz) Ø Easy CPU settings in BIOS with the “SOYO COMBO Setup”. Ø 3D PnP audio onboard Ø Auto-detect CPU voltage Ø PC97, APM, ACPI, Ul...

Page 5 - Installation; PREPARATIONS; II

SY-6IEM Quick Start Guide 5 Hardware Installation 2 2 Installation To avoid damage to your mainboard, follow these simple rules while handling this equipment: l Before handling the mainboard, ground yourself by grasping an unpainted portion ofthe system's metal chassis. l Remove the mainboard from i...

Page 6 - Install the Mainboard; Install the CPU; Mark your CPU Frequency:; Record the working frequency of your CPU that; CPU Mount Procedure:; To mount the Pentium

SY-6IEM Quick Start Guide 6 Hardware Installation Install the Mainboard Follow the steps below in order to perform the installation of your new SY-6IEM Mainboard. Step 1. Install the CPU Mark your CPU Frequency: Record the working frequency of your CPU that should be clearly marked on the CPU cover ...

Page 7 - Make Connections to the Mainboard; Connectors and Plug-ins; Connect the SB-Link TM

SY-6IEM Quick Start Guide 7 Hardware Installation Step 2. Make Connections to the Mainboard This section tells how to connect internal peripherals and power supply to the mainboard. Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan,Front Panel Devices (Turbo LED,...

Page 8 - Configure Memory; Memory Configuration; DIMM Banks; BIOS Setup for details on how to set the Pentium; by Keyboard

SY-6IEM Quick Start Guide 8 Hardware Installation Step 3. Configure Memory Your board comes with two DIMM sockets, providing support for up to 256MB of mainmemory using DIMM modules from 8MB to 128MB with no restriction on memoryconfiguration. Therefore, you can install memory modules in any combina...

Page 9 - To disable the onboard sound options short pin 1-2 on jumper JP2.; Onboard Sound

SY-6IEM Quick Start Guide 9 Hardware Installation Step 6. Enable/Disable Onboard Sound (JP2) The onboard audio features of your mainboard are controlled by jumper JP2.You canchoose to enable or disable the available sound function by setting JP2 accordingly. l Short pin 2-3 on jumper JP2 to enable t...

Page 10 - Quick BIOS Setup; Move the cursor to the; CPU Speed

SY-6IEM Quick Start Guide 10 Quick BIOS Setup 3 3 Quick BIOS Setup This mainboard does not use any hardware jumpers to set the CPU frequency. Instead,CPU settings are software configurable with the BIOS [SOYO COMBO SETUP]. The [SOYO COMBO SETUP] menu combines the main CPU parameters that you need to...

Page 11 - The SOYO CD; Insert the SOYO CD into the CD-ROM drive

SY-6IEM Quick Start Guide 11 The SOYO CD 4 4 The SOYO CD Your SY-6IEM Mainboard comes with a CD-ROM labeled "SOYO CD." The SOYO CDcontains the user's manual file for your new mainboard, the drivers software available forinstallation, and a database in HTML format with information on SOYO mai...

Page 12 - Install Drivers

SY-6IEM Quick Start Guide 12 The SOYO CD Please note that if the Start Up program was unable to determine which SOYO mainboardyou own, the manual selection menu will pop up, as shown below. Then select the user'smanual file that corresponds to your mainboard model name and click OK. (Manual Selectio...

Page 13 - The following drivers are available for Windows 95

SY-6IEM Quick Start Guide 13 The SOYO CD The following drivers are available for Windows 95 (Driver Installation Menu) The following drivers are available for Windows 98 (Driver Installation Menu)

Page 14 - Enter the SOYO CD

SY-6IEM Quick Start Guide 14 The SOYO CD Select which driver you want to install and click OK, or click Cancel to abort the driverinstallation and return to the main menu. Note: Once you have selected a driver, the system will automatically exit the SOYO CD tobegin the driver installation program. W...

Page 15 - Onboard Sound Driver Installation; If you are using the Windows; You do not need to install the sound driver since Windows; Windows; Win31d for Windows

SY-6IEM Quick Start Guide 15 Onboard Sound Driver Installation 5 5 Onboard Sound Driver Installation Windows ® 98 Users If you are using the Windows ® 98 operating system, skip this section. You do not need to install the sound driver since Windows ® 98 O/S, which already contains the ESS audio driv...

Page 17 - Using the Configuration Utility in DOS; configuration options similar to the following:; ] to select a new interrupt channel for the MPU401.

SY-6IEM Quick Start Guide 17 Onboard Sound Driver Installation ESSCFG.EXE and ESSVOL.EXE The installation of the driver will also install three files into the window’s directory:ESSCFG.EXE, ESSVOL.EXE and ESSCFG.INI, ESSCFG.EXE, configures AudioDrivechips to make them game-ready in DOS. ESSCFG.INI s...

SOYO SY-6IEM - Manual

Table of Contents:

Summary

Other SOYO Models