Sony SCD-XA5400ES - Manual
Sony SCD-XA5400ES – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – AC
- Page 3 – Accessories are given in the last of the electrical parts list.
- Page 4 – Model; US and Canadian models; UNLEADED SOLDER; NOTES ON LASER DIODE EMISSION CHECK; fl; ” or “No Disc” will appear.; Music discs encoded with copyright protection; Compatible Disc Types
- Page 5 – HOW TO OPEN THE TRAY WHEN POWER SWITCH TURNS OFF; CAUTION; MAIN BOARD SERVICE POSITION
- Page 6 – Front Panel; About the IR REMOTE jack
- Page 7 – Remote; Inserting batteries into the
- Page 8 – • This set can be disassembled in the order shown below.; Follow the disassembly procedure in the numerical order given.
- Page 11 – RB
- Page 12 – COLD RESET; SERVICE MODE of step 6 and 7; CDM TEST; ] button when to release from this mode.
- Page 13 – List of trouble log; Type
- Page 14 – DVD SERVICE MODE; Above-mentioned remote commander is one example. If it is the; DVD Service Mode General Description; Executing IOP Measurement; Drive Manual Operation
- Page 15 – Checking Emergency History; B. Parameter of error code; Example of Error code; C. Time of error code; Example of Error code; To Clear the Laser Hour
- Page 16 – Checking Version Information; From the top menu of Remocon Diagnosis Menu, select “4.; SECTION 5
- Page 17 – • SIGNAL PATH
- Page 21 – • Voltages and waveforms are dc with respect to ground; For Printed Wiring Boards.
- Page 22 – • See page 21 for Circuit Boards Location.; MAIN BOARD; • Semiconductor Location
- Page 23 – OUT SW BOARD; • Semiconductor
- Page 27 – • See page 38 for IC Block Diagrams.
- Page 30 – • See page 38 for waveforms. • See page 38 for IC Block Diagrams.
- Page 32 – DISPLAY BOARD
- Page 34 – LED BOARD
- Page 36 – STANDBY BOARD
- Page 38 – RE; UM
- Page 41 – • IC Pin Function Description; Pin Name
- Page 47 – LOADING
- Page 49 – not supplied
- Page 55 – AUDIO
- Page 64 – STANDBY
- Page 65 – MEMO
- Page 66 – REVISION HISTORY; Date; New
SERVICE MANUAL
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation
SCD-XA5400ES
SPECIFICATIONS
SUPER AUDIO CD PLAYER
9-889-205-01
2008H05-1
©
2008.08
US Model
Canadian Model
AEP Model
Model Name Using Similar Mechanism
NEW
Mechanism Type
CDM66F-DVBU101
Optical Pick-up Block Name
KHM-313CAB
When a Super Audio CD is played
Playing frequency range
2 Hz to 100 kHz
Frequency response
2 Hz to 50 kHz (–3 dB)
Dynamic range
110 dB or more
Total harmonic distortion rate
0.0012 % or less
Wow and flutter
Value of measurable limit
(±0.001 % W. PEAK) or
less
When a CD is played
Frequency response
2 Hz to 20 kHz (±0.5 dB)
Dynamic range
100 dB or more
Total harmonic distortion rate
0.0017 % or less
Wow and flutter
Value of measurable limit
(±0.001 % W. PEAK) or
less
General
Laser Diode Properties
Emission duration:
Continuous
Laser Output*: Less than
44.6 μW
* This output is the value
measurement at a
distance of 200 mm from
the objective lens surface
on the Optical Pick-up
Block with 7 mm
aperture.
Power requirements
North America:
120 V AC, 60 Hz
Europe:
230 V AC, 50/60 Hz
Power consumption
25 W
Power consumption (during standby mode)
0.5 W
Dimensions (w/h/d)
430 × 124 × 390 mm
(17 × 5 × 15 3/8 inch) incl.
projecting parts
Mass (approx.)
10.2 kg (22 lb 8 oz)
Supplied accessories
Audio connecting cord
Red and White plugs (1)
Remote commander
RM-ASU042 (1)
AC power cord
(1)
Battery
R6 (size-AA) (2)
Design and specifications are subject to change
without notice.
Output jacks
* Outputs only the audio signals of the CD
Jack type
Output
level
Load
impedance
ANALOG
OUT UN-
BALANCED
Phono
jacks
2 Vrms
(at 50
kilohms)
Over 10
kilohms
ANALOG
OUT
BALANCED
XLR
2 Vrms
(at 50
kilohms)
Over 600
ohms
HDMI
HDMI
DIGITAL
OUT (CD)
OPTICAL*
Square
optical
output
connector
–18 dBm
(Light
emitting
wave
length: 660
nm)
DIGITAL
OUT (CD)
COAXIAL*
Coaxial
output
connector
0.5 Vp-p
75 ohms
PHONES
Stereo
phone jack
5 mW
32 ohms
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SCD-XA5400ES 2 NOTES ON CHIP COMPONENT REPLACEMENT • Never reuse a disconnected chip component.• Notice that the minus side of a tantalum capacitor may be dam- aged by heat. FLEXIBLE CIRCUIT BOARD REPAIRING • Keep the temperature of soldering iron around 270 °C during repairing. • Do not touch the s...
SCD-XA5400ES 3 1. SERVICING NOTES ............................................. 4 2. GENERAL .................................................................. 6 3. DISASSEMBLY 3-1. Disassembly Flow ........................................................... 83-2. Case .................................
SCD-XA5400ES 4 SECTION 1 SERVICING NOTES Model Part No. US and Canadian models 3-873-299-1 [] AEP model 3-873-299-2 [] UNLEADED SOLDER Boards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead.( Caution: Some printed circuit boards may no...
