Page 6 - ABLE OF CONTENTS; About This Manual; Conventions
3 EN EN T ABLE OF CONTENTS Getting Started Unpacking .............................................................................................. 4 Hooking Up the System ....................................................................... 4 Playing a CD ............................................
Page 7 - Unpacking; Inserting batteries into the remote; Hooking Up the System; Overview; When to replace batteries; Getting Started; Preparing the connecting cords
4 EN Getting Started ç ç ç REC OUT TAPE IN DIGITAL OPTICAL IN Unpacking Check that you received the following items:• Audio connecting cords (2)• Optical cable (1)• Remote commander (remote) RM-D11M (1)• Sony SUM-3 (NS) batteries (2) Inserting batteries into the remote You can control the unit using...
Page 8 - Hooking up the system; Connecting the unit to an amplifier; Connecting the AC power cord; Connect the AC power cord to a wall outlet.; Note
5 EN Getting Started Connecting the unit to a digital component such as aDAT deck, digital amplifier, or another MD deck Connect the component through the DIGITAL OUTOPTICAL connector with an optical cable (supplied). Takethe cap off the connector before plugging in the cable. Hooking up the system ...
Page 9 - Playing a CD; to insert a CD. Press the button again; To use headphones; Basic Operations; Press; To; When you play an 8-cm CD
Basic Operations 6 EN Playing a CD 1 Turn on the amplifier and set the source selector to the positionfor TAPE (MD). 2 Press POWER.The POWER indicator changes from red to green. 3 Press CD (or set CD/MD to CD) to switch the function of thebuttons to CD. 4 Press OPEN/CLOSE § to insert a CD. Press the...
Page 10 - Playing an MD
Basic Operations 7 EN Basic Operations Playing an MD 1 Turn on the amplifier and set the source selector to the positionfor TAPE (MD). 2 Press POWER.The POWER indicator changes from red to green. 3 Press MD (or set CD/MD to MD) to switch the function of thebuttons to MD. 4 Insert an MD. Connect theh...
Page 11 - Recording a CD on an MD; Insert a recordable MD.
Basic Operations 8 EN Recording a CD on an MD (CD Synchro-Recording) You can easily make digitalrecordings from a CD on an MD,marking track numbers in thesame sequence as the originalCD. Before recording , see “Notes onRecording” on page 23. 1 Press POWER.The POWER indicator changes from red to gree...
Page 12 - to take out the MD or change the player to; To protect an MD against accidental erasure
Basic Operations 9 EN Basic Operations Do not disconnect the unit from the power source immediately afterrecording If you do, recorded material may not be saved to the MD. To save the material,after recording, press EJECT § to take out the MD or change the player to standby by pressing POWER. “TOC” ...
Page 13 - The display is usually as follows:; Playing CDs; * Total remaining time of the program appears; The music calendar display
10 EN Playing CDs The display is usually as follows: Checking Remaining Time of aCD Press CD (or set CD/MD to CD) to switch the functionof the buttons to CD. Checking the track number and remainingtime of the current track Press DISPLAY repeatedly while playing a CD.Each time you press the button, t...
Page 14 - and; To locate; You can extend the playing time during music scan; To go quickly to the beginning of the last track
11 EN Playing CDs Locating a Specific Track on aCD You can quickly locate any track while playing a CD byusing AMS (Automatic Music Sensor), = and + , number buttons or M.SCAN on the remote.Press CD (or set CD/MD to CD) to switch the functionof the buttons to CD. • • • • • • • • • • • • • • • • • • ...
Page 15 - You can play tracks repeatedly in any play mode.; You can also use; Repeating the current track
12 EN Playing CDs Playing Tracks on a CDRepeatedly (Repeat Play) You can play tracks repeatedly in any play mode. P p · § CD REPEAT CD/MDSwitch r 6 ) 0 + = p P · REPEAT A–B ) • • • • • • • • • • • • • • • • • • • • • • ≠ AMS ± P p · § 0 ) § 0/) CD Locating a Particular Point in aTrack on a CD You ca...
Page 17 - Do either; Press AMS or PLAY MODE.; Changing the track order
14 EN Playing CDs Playing Tracks on a CD in theDesired Order (Program Play) You can specify the playing order of the tracks on a CDand create your own programs containing up to 25tracks. Numberbuttons CD/MDswitch • • • • • • • • • • • • • • • • • • • • • • ≠ AMS ± P p · § 0 ) § CD PLAY MODE ≠ AMS ± ...
Page 18 - Original; : Unheard portion overlapped by the loop.
15 EN Playing CDs The difference between NORMAL andRHYTHM The original track can be looped in two ways,NORMAL and RHYTHM. Original In NORMAL mode After repeating a particular portion, the normal playstarts from the point you started pressing LOOP. In RHYTHM mode After repeating a particular portion,...
Page 19 - To restart playing; To cancel Auto Pause; To cancel Auto Space
16 EN Playing CDs Useful Tips When Recordingfrom CDs g The Auto Space, Auto Pause and Rec-It functionsdescribed in this section make recording from CDs totapes or MDs more easy.Press CD (or set CD/MD to CD) to switch the functionof the buttons to CD. Pausing after each track (Auto Pause) When the Au...
Page 20 - Checking remaining time and track title; Playing MDs
17 EN Playing MDs Checking Remaining Time of anMD Press MD (or set CD/MD to MD) to switch thefunction of the buttons to MD. Note When you insert a new MD or turn off the unit and turn iton again, the last item displayed will reappear.If, however, you disconnect the AC power cord, the displaywill sho...
Page 25 - To restart playback; Inserting blank spaces while recording to; The Auto Space function inserts a 3-second blank space
22 EN Playing MDs Useful Tips When Recordingfrom MDs to Tape g The Auto Space and Auto Pause functions described inthis section make recording from MDs to tape moreeasy.Press MD (or set CD/MD to MD) to switch thefunction of the buttons to MD. C D / M D s w i t c h Pausing after each track (Auto Paus...
Page 26 - Notes on Recording; Digital Recording and Analog Recording; Digital recording; • When recording from the CD player section, and CD; MD recording and the Serial Copy Management System; Track Marking; When recording from a CD digitally
23 EN Recording on MDs Recording on MDs Notes on Recording The MD allows you to digitally record and play backmusic with the excellent audio quality that approachesthe digital sound of CDs. In addition, because MDs areopto-magnetic discs, they are free from problems suchas stretching or becoming tan...
Page 27 - Recording on MDs
Recording on MDs 24 EN . . When “LEVEL-SYNC” is displayed during analogrecording The track number is written in sync with the level ofthe input signal from the sound source. In otherwords, if the input signal from the sound source iscontinuously at or below a certain fixed level forseveral seconds, ...
Page 28 - Useful Tips for Recording; Playing back tracks just recorded; To play from the first track of the MD after recording; Recording on an MD Manually
25 EN Recording on MDs Useful Tips for Recording Press MD (or set CD/MD to MD) to switch thefunction of the buttons to MD. Checking the remaining recordable time onthe MD • When you press DISPLAY repeatedly while the MD player is stopped, the display changes as follows (seepage 17): • When you press...
Page 29 - Analog recording
Recording on MDs 26 EN 4 Decide a point on the MD where you want to startrecording. To record on a brand new MD or start recordingfrom the end of the existing material Skip this step. To record from a specific point of a recorded track Press · to start playback, and press P at the point where you wa...
Page 30 - Adjusting the Recording Level; Stop playing the sound source.
27 EN Recording on MDs Recording the Mixed Sounds(Microphone Mixing) You can “mix” sound by playing the CD playersection, sound sources connected to the unit, or singingor speaking into a microphone (not supplied).The mixed sounds can then be recorded on an MD.You can also enjoy cross-fading with th...
Page 33 - Notes on Editing; If “Protected” appears in the display; Erasing a single track; Editing Recorded MDs
Editing Recorded MDs 30 EN Notes on Editing You can edit the recorded tracks after recording, usingthe following functions:• Erase function allows you to erase recorded tracks simply by specifying the corresponding tracknumber. • Divide function allows you to divide tracks at specified points so tha...
Page 34 - Erasing all tracks on an MD; To cancel the Erase function; Erasing a portion of a track
31 EN Editing Recorded MDs To cancel the Erase function Press EDIT/NO (or CANCEL), p , or turn AMS to change the track number.“Erase ?” disappears from the display. Note If “Erase!! ?”appears in the display, the track was recordedor edited on another MD deck and is record-protected. Ifthis indicatio...
Page 35 - While monitoring the sound, turn AMS (or press; To cancel the Divide function; You can undo a track division; While playing the MD, press
Editing Recorded MDs 32 EN 5 While monitoring the sound, turn AMS (or press = or + ) to find the starting position of the new track.The starting portion of the new track is playedback repeatedly.“Rehearsal“ alternates with “Position ok?“ in thedisplay.The starting position can be moved within amaxim...
Page 36 - To cancel the Combine function
33 EN Editing Recorded MDs 4 If the point is incorrect, press EDIT/NO (orCANCEL) or p , then start from step 1 again. If it is correct, skip to step 5. 5 If the point is correct, press YES (or ENTER).When the tracks have been combined,“Complete” appears for a few seconds and thetotal number of track...
Page 37 - To cancel the Move function
Editing Recorded MDs 34 EN Moving Recorded Tracks(Move Function) Use the Move function to change the order of anytrack. After you move a track, the track numbersbetween the new and old track positions areautomatically renumbered. Example: Moving track C to track position 2 1 2 3 4 1 4 Tracknumber 3 ...
Page 38 - Use the following procedure to label a track or an MD.
35 EN Editing Recorded MDs Labeling Recordings(Title Function) You can create titles for your recorded MDs and tracks.Titles — which may consist of uppercase andlowercase letters, numbers and symbols for amaximum of about 1,700 characters per disc — appearin the display during MD operation.See “Labe...
Page 39 - Labeling tracks and MDs with the remote; Select the character type as follows:; Changing an existing title; Note that once erased, titles cannot be recovered.
Editing Recorded MDs 36 EN Labeling tracks and MDs with the remote Z Alphabet/numberbuttons r 6 ) 0 + = p P · NAME CHAR CLEAR NUM 0/) 1 Press NAME so that a flashing cursor appears inthe display, then do the following: To label Make sure that the player is A track Playing, pausing, recording the tra...
Page 40 - To cancel the Undo function
37 EN Editing Recorded MDs Undoing the Last Edit(Undo Function) You can use the Undo function to cancel the last editand restore the contents of the MD to the conditionthat existed before editing was done. Note, however,that you cannot undo an edit if you do any of thefollowing after the edit:• Pres...
Page 41 - Meaning; Additional Information; MD Display Messages; Some tracks cannot be combined with others
Additional Information 38 EN Meaning A new (blank) or erased MD has beeninserted. An attempt was made to make a secondcopy from a digitally dubbed MD (seepage 42). An attempt was made to edit the MDduring Program or Shuffle Play. The MD is scratched or missing a TOC.Erase all tracks on a new recorda...
Page 42 - Troubleshooting; CD player section
Additional Information 39 EN Track numbers may not be recorded correctly When recording a CD digitally, small extra tracks may becreated due to the contents of the CD recording.In addition, when track marking is performed automaticallywith “LevelSync ON”, the track numbers may not berecorded correct...
Page 43 - Recording is not possible.; General; The remote does not function.
Additional Information 40 EN Recording is not possible. / The MD is protected against erasure (“Protected”appears).Slide the tab to close the slot. / The unit is not connected properly to the soundsource.Make connections properly to the sound source. / The recording level is not adjusted properly (i...
Page 44 - Specifications
Additional Information 41 EN DIGITALOUTOPTICAL LINE(ANALOG)OUT Over 10 kilohms Stereophonejack Squareopticalconnectorjack PHONES 32 ohms Phonojacks Wave length: 660 nm –18 dBm 10 mW 2 Vrms(at 50 kilohms) Outputs Jack type Rated output Load impedance Specifications CD player section System Compact Di...
Page 47 - Index
Additional Information 44 EN Index A, B A–B repeat 13, 20AMS (Automatic Music Sensor) 11, 18Analog recording 23Audio connecting cord 4, 42Auto pause 16, 22Auto space 16, 22 C CD inserting 6synchro-recording 8taking out 6, 9 Changing an existing title 36order of programmed tracks 14, 21 Checking rema...
Page 48 - Names of controls; EJECT
Additional Information 45 EN Names of controls Buttons A–B 12, 19Alphabet/Number 11, 14, 17, 18, 21, 36A.SPACE 16, 22CANCEL 30, 32 to 34, 37CD 6CD (REC SOURCE SELECTOR) 23, 27CD-SYNC. 8CHAR 36CLEAR 14, 21, 36COMBINE 33CONTINUE 13, 14, 20, 21DISPLAY 10, 17, 25DIVIDE 32EDIT/NO 28, 30, 32 to 37EJECT § ...
Page 49 - Précautions; AVERTISSEMENT
2 F Précautions Sécurité Si un objet ou un liquide pénètre dans lecoffret, débranchez l’appareil et faites-levérifier par un technicien qualifié avantde le remettre sous tension. Sources d’alimentation • Avant d’utiliser l’appareil, vérifiez que sa tension de fonctionnementcorrespond à celle du sect...
Page 50 - ABLE DES MATIÈRES
3 F F Bienvenue ! Merci d’avoir porté votre choix sur cetteplatine Compact Disc MiniDisc Sony.Avant de l’utiliser pour la première fois,veuillez lire complètement ce moded’emploi. Conservez ce mode d’emploipour pouvoir le consulter en cas debesoin. Présentation dumode d’emploi Conventions • Avant de...
Page 51 - Raccordement de la platine; Aperçu; Préparatifs; Déballage; Remarques
4 F Préparatifs Raccordement de la platine Aperçu Cette section explique comment raccorder la platine àun amplificateur ou à d’autres appareils tels qu’uneplatine DAT. Avant les raccordements, éteigneztoujours tous les appareils. Quels cordons utiliser ? • Cordons de liaison audio (fournis) (2) • Câ...
Page 52 - Raccordement de la platine à un amplificateur; Raccordement au secteur; Remarque
5 F Préparatifs Raccordement de la platine Raccordement de la platine à un amplificateur Raccordez l’amplificateur aux prises LINE (ANALOG) IN/OUT à l’aide des cordons de liaison audio (fournis) en tenantcompte de la couleur des cordons et de celles des prises. Lesfichiers rouges correspondent aux p...
Page 53 - Lecture d’un CD; Appuyez sur OPEN/CLOSE; Pour; Lecture d’un CD de 8 cm; Pour utiliser le casque
Opérations de base 6 F Opérations de base Lecture d’un CD REC LEVEL MIC • • • • • • • • • • • MIX BALANCE LINE MIC CD LINE 0 10 REC SOURCE SELECTOR CD LINE MIC NO EDIT MD YES • • • • • • • • • • • ≠ AMS ± r REC CD-SYNC. REC PAUSE PUSH ENTER MAX MIN LEVEL PHONES P p 0 ) DISPLAY SCROLL PLAY MODE REPEA...
Page 54 - Lecture d’un MD; Appuyez sur
Opérations de base 7 F Opérations de base Lecture d’un MD REC LEVEL MIC • • • • • • • • • • • MIX BALANCE LINE MIC CD LINE 0 10 REC SOURCE SELECTOR CD LINE MIC NO EDIT CD YES • • • • • • • • • • • ≠ AMS ± r REC CD-SYNC. REC PAUSE PUSH ENTER MAX MIN LEVEL PHONES P p § 0 ) DISPLAY SCROLL PLAY MODE REP...
Page 55 - Opérations de base; Enregistrement d’un CD sur un MD; Insérez un MD enregistrable.
Opérations de base 8 F REC LEVEL MIC • • • • • • • • • • • MIX BALANCE LINE MIC CD LINE 0 10 REC SOURCE SELECTOR CD LINE MIC NO MD YES • • • • • • • • • • • ≠ AMS ± r REC PUSH ENTER MAX MIN LEVEL PHONES P p · 0 ) DISPLAY SCROLL PLAY MODE REPEAT OPEN/CLOSE EJECT § 4 6 7 2 3 1 § POWER CD CD-SYNC. REC ...
Page 56 - Pour protéger un MD contre un effacement accidentel
Opérations de base 9 F Opérations de base Quand “TOC” clignote surl’afficheur La mise à jour du sommaire(TOC : Table Of Contents) est encours.Ne bougez pas la platine et nedébranchez pas le cordond’alimentation secteur.L’enregistrement risqueraitautrement de ne pas êtresauvegardé normalement. Ne déb...
Page 57 - L’affichage est normalement le suivant :; Affichage du répertoire
10 F Lecture de CD Lecture de CD 6 p P · DISPLAY • • • • • • • • • • • • • • • • • • • • • • ≠ AMS ± P p · § 0 ) § DISPLAY CD Vérification du temps restantsur un CD Appuyez sur CD (ou placez CD/MD sur CD) pour queles touches commandent le lecteur CD. L’affichage est normalement le suivant : Vérifica...
Page 58 - Lecture de CD; et; Pour localiser
11 F Lecture de CD Localisation d’une plagedonnée sur un CD Vous pouvez localiser rapidement une plage pendantla lecture d’un CD avec le bouton AMS (rechercheautomatique de plage), les touches = et + , les touches numériques ou la touche M.SCAN de latélécommande.Appuyez sur CD (ou placez CD/MD sur C...
Page 59 - Vous pouvez aussi utiliser; Pour localiser un point; Répétition de la plage en cours; Pour annuler la lecture répétée; La platine répète
12 F Lecture de CD • • • • • • • • • • • • • • • • • • • • • • ≠ AMS ± P p · § 0 ) § 0/) CD Localisation d’un point donnéd’une plage sur un CD Vous pouvez aussi utiliser 0 et ) pour localiser un point donné d’une plage pendant la lecture ou la pausede lecture.Appuyez sur CD (ou placez CD/MD sur CD) ...
Page 60 - Continuez la lecture de la plage ou gardez; Pour annuler la répétition A–B; Pour annuler la lecture aléatoire
13 F Lecture de CD Répétition d’un passage donné d’une plage(répétition A–B) Z Vous pouvez écouter plusieurs fois de suite un passaged’une plage. Cette fonction est pratique lorsque vousdésirez apprendre les paroles d’une chanson.Le passage répété doit cependant faire partie d’uneseule plage. 1 Pend...
Page 61 - Changement de l’ordre des plages
14 F Lecture de CD Création d’un programme delecture d’un CD(lecture d’un programme) Vous pouvez spécifier l’ordre dans lequel les plagesd’un CD seront lues et créer ainsi votre propreprogramme. Un programme peut contenir jusqu’à 25plages. 1 Appuyez sur CD (ou placez CD/MD sur CD). 2 Appuyez plusieu...
Page 62 - Différence entre NORMAL et RHYTHM; En mode NORMAL
15 F Lecture de CD Différence entre NORMAL et RHYTHM La plage originale peut être lue en boucle de deuxmanières : NORMAL et RHYTHM. Plage originale : En mode NORMAL Après répétition de la partie choisie, la lecture reprendnormalement à partir du point où vous avezcommencé à appuyer sur LOOP. En mode...
Page 63 - Pour annuler l’espacement automatique; Pour annuler la pause automatique
16 F Lecture de CD Conseils utiles pourl’enregistrement d’un CD Z Les fonctions d’espacement automatique, pauseautomatique et d’enregistrement de la plage en cours(Rec–it) décrites dans cette section facilitentl’enregistrement d’un CD sur une cassette ou sur unMD.Appuyez sur CD (ou placez CD/MD sur ...
Page 65 - Lecture de MD
18 F Lecture de MD Localisation d’une plagedonnée sur un MD Vous pouvez localiser rapidement une plage pendantla lecture d’un disque avec AMS (rechercheautomatique de plage), = et + , les touches numériques ou M.SCAN de la télécommande.Appuyez sur MD (ou placez CD/MD sur MD) pourque les touches comm...
Page 70 - Lors de l’enregistrement numérique d’un CD; Enregistrement sur un MD; Enregistrement numérique; • Enregistrement depuis le lecteur CD de l’appareil
23 F Enregistrement sur un MD M a r q u a g e d e s p l a g e s Le marquage des plages consiste essentiellement àinscrire des numéros de plage en certains points duMD pendant l’enregistrement. Ceci vous permetensuite de retrouver rapidement ces points en utilisantla fonction AMS (recherche automatiq...
Page 72 - Lecture à partir du début du MD après un enregistrement
25 F Enregistrement sur un MD Enregistrement manuel sur unMD Vous pouvez enregistrer à la suite d’un autreenregistrement ou sur des plages enregistrées commepour une cassette analogique. 1 Allumez l’amplificateur et réglez le sélecteur desource sur la source que vous souhaitezenregistrer.Pour enregi...
Page 73 - Pour arrêter un enregistrement analogique; Pour arrêter un enregistrement numérique
Enregistrement sur un MD 26 F 4 Choisissez le point du MD où vous désirezcommencer l’enregistrement Pour enregistrer sur un MD neuf ou à la suite d’unenregistrement existant Sautez cette étape. Pour enregistrer à partir d’un point donné d’uneplage enregistrée Appuyez sur · pour commencer la lecture,...
Page 74 - Arrêtez la lecture de la source.
27 F Enregistrement sur un MD Réglage du niveaud’enregistrement Quand vous enregistrez une source sélectionnée àl’aide des touches REC SOURCE SELECTOR, réglez leniveau d’enregistrement avant de commencerl’enregistrement.Vous ne pouvez pas régler le niveau d’enregistrementlors d’un enregistrement num...
Page 76 - Pour annuler le marquage automatique
29 F Enregistrement sur un MD 1 Appuyez plusieurs fois sur EDIT/NO pendantl’enregistrement ou la pause d’enregistrementjusqu’à ce que “LevelSync ?” apparaisse. 2 Appuyez deux fois sur YES pour afficher“LevelSync ON”. “LEVEL-SYNC” apparaît surl’afficheur. Pour annuler le marquage automatique 1 Appuye...
Page 77 - Remarques sur le montage; • La fonction de division d’une plage enregistrée vous; Si “Protected” apparaît sur l’afficheur; Effacement d’une seule plage
Montage d’un MD enregistré 30 F Montage d’un MD enregistré Remarques sur le montage Vous pouvez monter les plages enregistrées enutilisant les fonctions suivantes :• La fonction d’effacement d’un enregistrement vous permet d’effacer les plages enregistrées en spécifiantsimplement le numéro de plage ...
Page 78 - Montage d’un MD enregistré; Effacement d’un passage d’une plage; Effacement de toutes les plages d’un MD; Pour annuler la fonction d’effacement
31 F Montage d’un MD enregistré Effacement d’un passage d’une plage Utilisez les fonctions de division (voir page 32),d’effacement (voir page 30) et de combinaison (voirpage 33) pour effacer un passage particulier d’uneplage. Exemple : Effacement d’un passage de la plage A Pour annuler la fonction d...
Page 79 - Pendant la lecture du MD, appuyez sur; Pour annuler la fonction de division; Vous pouvez supprimer une division de plage
Montage d’un MD enregistré 32 F Division d’une plageenregistrée(fonction de division) Avec la fonction de division, vous pouvez insérer unnouveau numéro de plage à certains endroits dudisque afin de pouvoir y revenir plus tard. Utilisezcette fonction pour ajouter des numéros de plage auxMD enregistr...
Page 80 - Pour annuler la fonction de combinaison
33 F Montage d’un MD enregistré Combinaison de plusieursplages enregistrées(fonction de combinaison) Utilisez la fonction de combinaison pendant l’arrêt, lalecture ou la pause pour combiner des plagesconsécutives d’un MD enregistré. Cette fonction estpratique lorsque vous voulez réunir plusieurschan...
Page 81 - Pour annuler la fonction de déplacement
Montage d’un MD enregistré 34 F Déplacement d’une plageenregistrée(fonction de déplacement) Utilisez la fonction de déplacement pour changerl’ordre des plages. Quand une plage a été déplacée, lesplages entre la nouvelle position et l’ancienne positionsont automatiquement renumérotées. Exemple : Dépl...
Page 82 - Procédez comme suit pour titrer une plage ou un MD.
35 F Montage d’un MD enregistré Titrage d’un enregistrement(fonction de titrage) Vous pouvez créer des titres pour les MD et plages quevous avez enregistrés. Les titres peuvent comprendredes lettres majuscules ou minuscules, des chiffres et dessymboles et ne doivent pas dépasser 1 700 caractèrespar ...
Page 83 - Sélectionnez le type de caractère comme suit :; Changement d’un titre
Montage d’un MD enregistré 36 F r 6 ) 0 + = p P · NAME CHAR CLEAR NUM 0/) Titrage des plages et MD à l’aide de latélécommande Z 1 Appuyez plusieurs fois sur NAME jusqu’à cequ’un curseur clignotant apparaisse surl’afficheur, puis effectuez les opérations suivantes : Pour titrer Assurez-vous que la pl...
Page 84 - Opération de montage effectuée; Pour annuler la fonction de annulation
37 F Montage d’un MD enregistré Annulation de la dernièreopération de montage(fonction de annulation) Cette fonction vous permet d’annuler la dernièreopération de montage et de rétablir le contenu du MDaux conditions précédant cette opération. Vous nepouvez cependant pas annuler la dernière opératio...
Page 85 - Messages MD affichés; Messages; Limites du système MD; Certaines plages ne peuvent pas être recombinées; Informations supplémentaires
Informations supplémentaires 38 F Messages MD affichés Le tableau ci-dessous explique les divers messages quiapparaissent sur l’afficheur : Messages Signification Blank Disc Un MD neuf (vierge) ou effacé a étéinséré. Cannot Copy Vous essayez de faire une seconde copied’un MD copié numériquement (voi...
Page 86 - “TOC Reading” reste longtemps affiché; Guide de dépannage; Section lecteur CD; La lecture du CD ne démarre pas.; Section platine MD; La platine ne fonctionne pas ou fonctionne mal.
Informations supplémentaires 39 F Les numéros de plage ne sont pas enregistréscorrectement Selon le contenu du CD, il se peut qu’un certain nombre depetites plages additionnelles soient créées lors d’unenregistrement numérique. Selon le contenu du CDégalement, lorsque le marquage des numéros de plag...
Page 87 - L’enregistrement n’est pas possible.; Généralités; La télécommande ne fonctionne pas.
Informations supplémentaires 40 F L’enregistrement n’est pas possible. / Le MD est protégé contre l’effacement (“Protected”apparaît).Déplacez le taquet pour fermer la fente deprotection. / La platine n’est pas raccordée correctement à lasource sonore.Effectuez correctement les raccordements à la sou...
Page 88 - Spécifications
Informations supplémentaires 41 F Entrées LINE(ANALOG) IN MIC Sorties PHONES LINE(ANALOG)OUT DIGITALOUTOPTICAL Généralités Alimentation électrique 120 V, 60 Hz Consommation électrique 28 W Dimensions (approx.) (l/h/p), parties saillantes comprises 430 x 107 x 280 mm Poids (approx.) 4,5 kg Accessoire...
Page 89 - Première règle
Informations supplémentaires 42 F Guide du système deprotection contre la copieabusive (SCMS) Vous ne pouvez pas faire une copie numérique d’unMD enregistré par la prise d’entrée numérique car cetteplatine est conforme à la norme SCMS (Système deprotection contre la copie abusive). Le système SCMSli...
Page 90 - Troisième règle
Informations supplémentaires 43 F Troisième règle Vous pouvez copier une cassette DAT ou un MD contenantun enregistrement analogique, une émission FM ou autresource analogique sur une autre cassette DAT ou un autreMD par la prise de sortie numérique de la platine DAT ouMD. Vous ne pouvez pas faire u...
Page 92 - Nomenclature
Informations supplémentaires 45 F Index Nomenclature Touches A–B 12, 19Alphanumériques 11, 14, 17, 18, 21, 36A.SPACE 16, 22CANCEL 30, 32 à 34, 37CD 6CD (REC SOURCE SELECTOR) 23, 27CD-SYNC. 8CHAR 36CLEAR 14, 21, 36COMBINE 33CONTINUE 13, 14, 20, 21DISPLAY 10, 17, 25DIVIDE 32EDIT/NO 28, 30, 32 à 37EJEC...