Sony LX70S - Manual
Sony LX70S – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – safety checks before releasing the set to the customer.; COMPONENTS IDENTIFIED BY MARK; Check the B+ voltage to see it is at the values specified.
- Page 4 – ERROR CODE INDICATION; ERROR CODE; SERVICE NOTE; Mode code indication when the error has occurred.
- Page 5 – Step 2 : Setting up the remote commander; Inserting the batteries
- Page 6 – Completing A/V hookup; Hookup 1; Hookup 2
- Page 7 – Hookup 3
- Page 8 – Selecting a language; Setting the clock
- Page 9 – If the clock does not activate; Using Manual Clock Set
- Page 10 – Presetting all receivable channels automatically; Presetting/disabling channels manually
- Page 11 – If the picture is not clear; Basic Operations; Playing a tape
- Page 14 – About the Demonstration Mode; Recording TV programs using the timer
- Page 15 – Additional Operations; Playing/searching at various speeds
- Page 16 – Setting the recording duration time; Recording stereo programs
- Page 17 – How sound is recorded on a video tape; Searching using the index function
- Page 19 – Adjusting the tracking; About the Adaptive Picture Control (APC) function
- Page 20 – Editing with another VCR; How to connect to record on this VCR
- Page 21 – Additional Information; General setup information; Setting the RF unit; Attaching the external antenna connector; Front panel
- Page 22 – Display window; EP; Rear panel; Remote commander
- Page 24 – Follow the disassembly procedure in the numerical order given.
- Page 35 – μμ; Kinds of capacitor; or dotted line with mark
- Page 36 – FRAME SCHEMATIC DIAGRAM
- Page 38 – VIDEO HEAD; SIGNAL PATH
- Page 41 – AUDIO PROCESS; REC
- Page 42 – TUNER; IF
- Page 43 – DISPLAY CONTROL; FLUORESCENT TUBE INDICA
- Page 44 – POWER SUPPLY
- Page 45 – OSD V OUT PB
- Page 46 – LINE 2 IN
- Page 47 – DI-80 (DIAL TIMER) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM; DIAL TIMER
- Page 48 – SECTION 5
- Page 49 – -3. SYSTEM CONTROL — SYSTEM CONTROL PERIPHERAL CIRCUIT INTERFACE
- Page 52 – MECHANICAL ADJUSTMENTS; PREPARATION BEFORE ADJUSTMENT; Equipment Required; NTSC model; Alignment Tape; SECTION 6
- Page 53 – POWER SUPPLY CHECK; Power Supply Check
- Page 54 – Audio line OUTPUT L/R; PB RF
- Page 55 – Tape path adjustment must have been completed.
- Page 56 – ADJUSTING PARTS LOCATION DIAGRAM; ADJ
- Page 57 – The components identified by mark; Description
- Page 71 – Sony Corporation; NETWORK ENTERTAINMENT GROUP; Published by Quality Assurance Dept.
— 1 —
LX40/LX50/LX60S/LX70S
RMT-V293A/V294A
Chilean Model
SLV-LX50CL/LX50CS/LX70SCL/
LX70SCS
Mexican Model
SLV-LX40MX/LX50MX/LX60SMX/
LX70SMX
Panama Model
Venezuelan Model
SLV-LX50PA/LX50PC/LX50VZ/
LX70SPA/LX70SPC/LX70SVZ
SERVICE MANUAL
VIDEO CASSETTE RECORDER
S MECHANISM
Refer to the SERVICE MANUAL of VHS MECHANICAL
ADJUSTMENT for MECHANICAL ADJUSTMENTS.
(9-921-748-11)
SPECIFICATIONS
HiFi model :
SLV-LX60S/LX70S
Mono model :
SLV-LX40/LX50
System
Format
VHS NTSC standard
Video recording system
Rotary head helical scanning FM system
Video heads
Double azimuth four heads
Video signal
NTSC color, EIA standards
Tape speed
SP: 33.35 mm/s
EP: 11.11 mm/s
LP: 16.67 mm/s,
playback only
Maximum recording/playback time
9 hrs. in EP mode (with T-180 tape)
Fast-forward and rewind time
Approx. 3 min. (with T-120 tape)
Tuner section
Channel coverage
VHF 2 to 13
UHF 14 to 69
CATV A-8 to A-1, A to W, W+1 to W+84
Antenna
75-ohm antenna terminal for VHF/UHF
Input and outputs
LINE-1 IN and -2 IN
VIDEO IN, phono jack (1 each)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jacks (1 each) (SLV-LX50
and LX40), (2 each) (SLV-LX70S and LX60S)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO OUT, phono jacks (1 each) (SLV-LX50
and LX40), (2 each) (SLV-LX70S and LX60S)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
Timer section
Clock
Quartz locked
Timer indication
12-hour cycle
Timer setting
8 programs (max.)
Power back-up
Built-in self-charging capacitor
Back-up duration: up to 8 hours at a time
General
Power requirements
110 V AC to 240 V AC, 50/60 Hz
(SLV-LX70S (CL/CS) and LX50 (CL/CS))
120 V AC, 60 Hz
(SLV-LX70S (MX/PA/PC/VZ), LX60S (MX),
LX50 (MX/PA/PC/VZ), and LX40 (MX))
Power consumption
17 W
(SLV-LX70S (CL/CS/MX/PA/PC/VZ) and
SLV-LX60S (MX))
16 W
(SLV-LX50 (CL/CS/MX/PA/PC/VZ) and
SLV-LX40 (MX))
Operating temperature
5°C to 40°C (41°F to 104°F)
Storage temperature
–20°C to 60°C (–4°F to 140°F)
Dimensions
Approx. 355 x
96 x 288.8 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 3.6 kg
Supplied accessories
Remote commander (1)
Size AA (R6) batteries (2)
75-ohm coaxial cable with F-type connectors (1)
Audio/video cable (1) (3-phono to 3-phono)
(SLV-LX70S and LX60S only)
Plug adaptor (1)
(SLV-LX70S (CL/CS) and LX50 (CL/CS) only)
Design and specifications are subject to change
without notice
ENERGY STAR
®
is a U.S. registered mark.
As an ENERGY STAR
®
Partner, Sony Corporation
has determined that this product meets the
ENERGY STAR
®
g
1
2
3
4
5
6
7
8
9
0
SLV-LX70S
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
— 2 — SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-solderedconnections. Check the entire board surface for solder splashesand bridges. 2. Check t...
— 4 — 1. ERROR CODE INDICATION • Error codes are indicated using the lower 5 digits in the fluorescent display tube. “At this time, Colon “:” between character is not indicated.” ERROR CODE MODE CODE 0 Power-on eject 10 FWD x1 20 REW play 1 Power-on initial 11 FWD x2 21 Cas. loading 2 Power-off ejec...
1-1 SECTION 1 GENERAL SLV-LX40/LX50/LX60S/LX70S 5 Setting up the remote commander Step 2 : Setting up the remote commander Notes • With normal use, the batteries should last about three to six months.• If you do not use the remote commander for an extended period of time, remove the batteries to avo...