Page 2 - THIS APPARATUS MUST BE EARTHED.
2 Owner’s Record The model and serial numbers are located at the rear. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. ____________________Serial No. ____________________ WARNING To reduce the risk of...
Page 3 - Symbol
3 Caution When you dispose of the unit or accessories, you must obey the law in the relative area or country and the regulation in the relative hospital. For the customers in the USA Lamp in this product contains mercury. Disposal of these materials may be regulated due to environmental consideratio...
Page 4 - Important EMC notices for use in the medical environments; • The LMD-3250MD needs special precautions; Warning
4 Important EMC notices for use in the medical environments • The LMD-3250MD needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided in this instructions for use. • The portable and mobile RF communications equipment such as ce...
Page 6 - Recommended separation distance
6 Guidance and manufacturer’s declaration - electromagnetic immunity The LMD-3250MD is intended for use in the electromagnetic environment specified below. The customer or the user of the LMD-3250MD should assure that it is used in such as environment. Immunity test IEC 60601 test level Compliance l...
Page 8 - Table of Contents
Table of Contents 8 Table of Contents Precaution .............................................................. 9 On Safety ............................................................ 9On Installation .................................................... 9About the LCD Display Panel ...................
Page 9 - Precaution; On Safety; Before cleaning
Precaution 9 Precaution On Safety • Operate the unit on 100-240 V AC only.• The nameplate indicating operating voltage, etc. is located on the AC adaptor. • Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any fur...
Page 10 - Disposal of the Unit; • Do not dispose of the unit with general waste.; On Repacking; Features; Picture; Fully digital 10-bit signal processing circuit; Input; Accepts analog RGB input signals
Features 10 Disposal of the Unit • Do not dispose of the unit with general waste. Do not include the monitor with household waste. • The fluorescent tube includes mercury. Dispose of the monitor in accordance with the regulations of your local sanitation authority. Recommendation to Use more than On...
Page 11 - Functions; Two kinds of input signals are put on the monitor.; Other
Features 11 Accepts DVI-D (digital) input signals *1 Adopting the scan converter allows this monitor to detect VGA, SVGA, XGA and SXGA digital computer signals input to the DVI input connector.To view SXGA signals when the DVI input is selected, use the cable within 3 m (118 1 /8 inches) in length. ...
Page 12 - Location and Function of Parts and Controls; Front Panel; Press to select the items and setting values.; qa
Location and Function of Parts and Controls 12 Location and Function of Parts and Controls Front Panel a Tally lamp You can check the status of the monitor by the color of the tally lamp.The tally lamp lights in green according to the setting of PARALLEL REMOTE in the REMOTE menu. b Power indicator ...
Page 13 - Input select buttons
Location and Function of Parts and Controls 13 j Input select buttons Press the button to monitor the signal input to each connector.A-1, A-2, B-1 and B-2 buttons are used when an optional input adaptor has been installed in the option slot. COMPOSITE button: to monitor the signal through the COMPOS...
Page 14 - Input signals and adjustable/setting items
Location and Function of Parts and Controls 14 Input signals and adjustable/setting items a : Adjustable/can be set × : Not adjustable/cannot be set *1 Adjustment of SUB CONTROL is the same.*2 When a component signal (480/60I or 480/60P) is input and the COMPONENT LEVEL is set to SMPTE, this can be ...
Page 15 - DC 5V/24V IN connector; Note
Location and Function of Parts and Controls 15 Side/Rear Panel a DC 5V/24V IN connector Connect the DC connector of the supplied AC adaptor. b / (power) switch The power is turned on or off.The monitor is turned on by pressing side . c Loop-through output connectors Outputs the signals input to the ...
Page 16 - Optional input slot; CAUTION; CAUTION; • When an optional LAN cable is connected, use a
Location and Function of Parts and Controls 16 k Optional input slot An optional input adaptor can be installed according to your system configuration (see page 18).The upper slot is A and the lower slot is B.Press the A-1, A-2, B-1 or B-2 button to select the signal.The BKM-243HS (HD/D1-SDI input a...
Page 17 - Slide the AC plug holder over the cord until it locks.; To remove the AC power cord
Connecting the AC Power Cord 17 Connecting the AC Power Cord Connect the supplied AC power cord as illustrated.Two kinds of AC plug holders are supplied with this unit. Use the AC plug holder that fits the AC power cord most securely. 1 Plug the AC power cord into the AC IN socket on the AC adaptor....
Page 18 - Remove the panel of the optional input slot.; Caution
Installing the Input Adaptor / Removing the Connector Cover 18 Installing the Input Adaptor Before installing the input adaptor, disconnect the power cord. 1 Remove the panel of the optional input slot. 2 Insert the input adaptor into the slot. 3 Tighten the screws. Removing the Connector Cover When...
Page 19 - The default setting values for each area
Selecting the Default Settings 19 Selecting the Default Settings When you turn on the unit for the first time after purchasing it, select the area where you intend to use this unit from among the options. The default setting values for each area 1 Turn on the unit with the / (power) switch on the bo...
Page 20 - If LATIN AMERICA is selected:
Selecting the Menu Language 20 2 If LATIN AMERICA is selected: 4 If ASIA EXCEPT JAPAN is selected: Customers who will use this unit in the shaded areas shown in the map below should select NTSC AREA.Other customers should select PAL AREA. 3 Press the ENTER button. The SELECT SETTING screen disappear...
Page 21 - To clear the menu; Using the Menu
Using the Menu 21 The setting items (icons) in the selected menu are displayed in yellow. 5 Press the + or – button to select “LANGUAGE,” then press the ENTER button. The selected item is displayed in yellow. 6 Press the + or – button to select a language, then press the ENTER button. The menu chang...
Page 22 - When changing the adjustment level:; Notes; For details on the key inhibit, see page 31.
Using the Menu 22 The menu icon presently selected is shown in yellow and setting items are displayed. 4 Select an item. Use the + or – button to select the item, then press the ENTER button.The item to be changed is displayed in yellow.If the menu consists of multiple pages, press + or – button to ...
Page 23 - Loading USER MEMORY; To stop selecting the memory; Items; STATUS (the items indicate the; USER CONTROL; For the video input; USER CONFIG
Loading USER MEMORY / Adjustment Using the Menus 23 Loading USER MEMORY You can load the picture settings saved in the USER MEMORY menu (on page 31). 1 Press the USER MEM button. The USER MEMORY menu appears. 2 Select the memory number. + or – button: to select the memory number 3 Press the ENTER bu...
Page 24 - MULTI DISPLAY SETTING; REMOTE; KEY INHIBIT; USER MEMORY
Adjustment Using the Menus 24 MATRIXCOMPONENT LEVELNTSC SETUPGAMMAFORMAT DISPLAYLANGUAGEPOWER SAVINGPICTURE DELAY MIN MULTI DISPLAY SETTING MULTI DISPLAY ENABLEMULTI DISPLAYSUB INPUT SELECTPOSITIONFRAME FUNCTION BUTTON SETTING F1 BUTTONF2 BUTTONF3 BUTTONF4 BUTTON COMPUTER DETECT DVIHD15 REMOTE PARAL...
Page 25 - COLOR TEMP/SPACE menu; COLOR TEMP; ADJUST GAIN; COLOR SPACE; Submenu; : The auto adjustment
Adjustment Using the Menus 25 COLOR TEMP/SPACE menu The COLOR TEMP/SPACE menu is used for adjusting the picture white balance or color space. You need to use the measurement instrument to adjust the white balance.Recommended: Konica Minolta color analyzer CA-210 USER CONTROL menu The USER CONTROL me...
Page 26 - For the DVI/HD15 input
Adjustment Using the Menus 26 For the DVI/HD15 input SUB CONTROL Adjusts finely the adjustment range of the button on the front panel for CONTRAST, BRIGHTNESS, CHROMA and PHASE.• CONTRAST : Adjusts the picture contrast. • BRIGHTNESS : Adjusts the picture brightness. • CHROMA : Adjusts color intensit...
Page 27 - USER CONFIG menu
Adjustment Using the Menus 27 USER CONFIG menu The USER CONFIG menu is used for setting the system, multi display, function button and computer detect. SYSTEM SETTING PICTURE CONTROL Adjusts to monitor the picture more clearly.• SIZE H : Adjusts the horizontal size of the picture. The higher the set...
Page 29 - FUNCTION BUTTON SETTING; Scan mode image; EXT SYNC; Inp
Adjustment Using the Menus 29 FUNCTION BUTTON SETTING About the function assigned to the function button SCAN Press to change the scan size of the picture. Press to switch between NORMAL scan (0% scan), OVER scan (20% over scan) and NATIVE (720P only) (see “Scan mode image” on page 29). ASPECT Press...
Page 30 - COMPUTER DETECT
Adjustment Using the Menus 30 COMPUTER DETECT REMOTE menu Submenu Setting COMPUTER DETECT The appropriate preset memory is set for the signal from DVI and HD15 input connector. Select “PRESET1” for the standard PC signal. Select “PRESET2” to “PRESET8” when the PC signal is not standard (on page 35)....
Page 31 - KEY INHIBIT menu; To save the picture setting; The USER MEMORY setting menu appears.; To close the menu without saving the setting
Adjustment Using the Menus 31 KEY INHIBIT menu You can lock the setting so that they cannot be changed by an unauthorized user.Select OFF or ON.If you set to ON, all items are displayed in black, indicating the items are locked. USER MEMORY menu Saving the user memory You can save the 20 picture set...
Page 32 - To change the name; Troubleshooting; The display is colored in green or purple
Troubleshooting 32 To change the name 1 Press the + or – button to select the memory number in the USER MEMORY menu, then press the ENTER button. The USER MEMORY setting menu appears. 2 Press the – button to select “NAME”, then press the ENTER button. The menu for setting the user name appears. 3 Ch...
Page 33 - Specifications; Picture performance; General
Specifications 33 Specifications Picture performance LCD panel a-Si TFT Active Matrix Pixel efficiency 99.99%Viewing angle (up/down/left/right, contrast > 10:1) 89°/89°/89°/89° (typical) Scan Normal 0%Over scan 20% Efficient picture size 698.4 × 392.9, 801.3 mm (w/h, dia) (27 1 / 2 × 15 1 / 2 , 3...
Page 34 - Medical Specifications; Pin assignment; PARALLEL REMOTE connector; Available signal formats; Pin number
Specifications 34 Storage and transport temperature –20 °C to +60 °C (–4 °F to 140 °F) Storage and transport humidity 0% to 90% (no condensation allowed) Storage and transport pressure 700 hPa to 1060 hPa Accessories supplied AC adaptor (AC-110MD) (1)AC power cord (1)AC plug holder (2)Instructions f...
Page 35 - About the preset signal
Specifications 35 *1 The frame rate is also compatible with 1/1.001.*2 Component only About the preset signal This unit has a preset memory for signals connected to the DVI and HD15 input terminals (the preset memory). When a preset signal is input, the unit automatically detects the signal type and...
Page 36 - PRESET 1; Available HD15 input signal formats
Specifications 36 PRESET 1 Available HD15 input signal formats VESA DMT VESA CVT Resolution Dot clock [MHz] fH [kHz] fV [Hz] Sync. polarity Horizontal Vertical 640 × 480 60 Hz 25.175 31.469 59.940 Negative Negative 800 × 600 56 Hz 36.000 35.156 56.250 Positive Positive 800 × 600 60 Hz 40.000 37.879 ...
Page 37 - Others
Specifications 37 Others Available DVI input signal formats Range of DVI input signal (available to 1920 × 1080 / 60Hz) Vertical frequency: 50.0 to 85.1 HzHorizontal frequency: 31.5 to 77.0 kHzDot clock: 25.175 to 148.000 MHzPicture size, phase: automatic discrimination by the DE (Data Enable) signa...
Page 39 - Dimensions; Front; When an optional stand SU-32FW is attached; AC adaptor; Side; When an optional stand SU-32FW is attached
Dimensions 39 Dimensions 200 (7 7 / 8 ) 100 (4) 300 (11 7 / 8 ) 400 (15 3 / 4 ) M6 Rear (VESA Mount Instruction) Front When an optional stand SU-32FW is attached 479.2 (18 7 / 8 ) 392 (15 1 / 2 ) 783 (30 7 / 8 ) * Length of M6 screws (4) Monitor cabinet Attached object 10 ( 13 / 32 ) M6 screw 124.3 ...
