Page 5 - WARNING; Note on the remote commander; Notes; Getting Started; Back
Getting Started -EN 5 WARNING Table of contents • Dangerously high voltages are present inside the TV.• Operate the TV only at 110-240 V AC.• Do not open the cabinet and the rear cover of the TV. Refer servicing to qualified personnel. • To prevent fire or shock hazard, do not expose the TV to rain ...
Page 6 - Connecting optional equipment; Connecting video equipment using video input jacks; Connections; or; Rear of TV
Getting Started 6 -EN VIDEO IN MON/TV OUT 1 2 3 VIDEO AUDIO L (MONO) R S VIDEO Connecting a VHF antenna or a combination VHF/UHF antenna— 75-ohm coaxial cable (round) Attach an optional IEC antenna connector to the 75-ohm coaxial cable.Plug the connector into the (antenna) socket at the rear of the ...
Page 7 - Connecting audio/video equipment using MON/TV OUT jacks; Front of TV
Getting Started -EN 7 VIDEO IN MON/TV OUT 1 2 3 VIDEO AUDIO L (MONO) R S VIDEO When connecting a monaural VCR Connect the yellow plug to VIDEO and the black plug to AUDIO-L (MONO). When connecting video game equipment Connect video game equipment to the VIDEO 3 INPUT jacks at the front of your TV or...
Page 8 - Label color
Getting Started 8 -EN Names of buttons on the remote commander are indicated in different colors to represent the available functions. Label color Button function White For general TV operations. Green For Teletext operations. Yellow For PIP and PROGRAM INDEX operations. Notes • The Teletext operati...
Page 9 - Press; Cancelling the menu screen; PRESET
Getting Started -EN 9 A/V CONTROL PIP FEATURES Getting back to the previous menu(except for AUTO PROGRAM) Press V or v to move the cursor ( z ) to the first line ( N ) of each menu, and press ENTER. Cancelling the menu screen Press MENU. Notes (except for AUTO PROGRAM) • When a menu is selected afte...
Page 10 - All of the menus change to Chinese.
Getting Started 10 -EN Changing the menulanguage 4 Make sure the cursor ( z ) appears beside LANGUAGE/###, and press ENTER. 5 Press V / b / v / B to select ###, and press ENTER. All of the menus change to Chinese. 6 Press MENU to return to the normal screen. If you prefer Chinese to English, you can...
Page 11 - Presetting channels; Note; Presetting channels manually; Presetting channels automatically
Getting Started -EN 11 Presetting channels MAIN POWER Note • If you want to return to the normal screen while the nine sub screens are being displayed, you can press PROGR INDEX onthe remote commander. To preset channels automatically usingthe menu 1 Press MENU. 2 Press V or v to move the cursor ( z...
Page 12 - Disabling program positions
Getting Started 12 -EN Disabling program positions By disabling unused or unwanted program positions,you can skip those positions when you press PROGR+/–. 1 Press MENU. 2 Press V or v to move the cursor ( z ) to the PRESET menu ( ), and press ENTER. 3 Press V or v to move the cursor ( z ) to SKIP, a...
Page 13 - Watching the TV; Turning off the TV; Press MAIN POWER on the TV.; Watching the video input; Press the number button.; Operations
Operations -EN 13 Watching the TV To scan through program positions Press PROGR +/– on the remote commander or theTV until the program position you want appears. 3 Press VOL +/– on the remote commander orVOLUME +/– on the TV to adjust the volume. Turning off the TV To turn off the TV temporarily Pre...
Page 14 - To watch TV; Muting the sound; Setting the Wake Up Timer; The WAKE UP indicator lights up in amber color.
Operations 14 -EN To watch TV Press TV on the remote commander or TV/VIDEO onthe TV. Switching back quickly to the previouschannel Press JUMP. Muting the sound Press MUTING. Displaying the on-screen information Press DISPLAY/REVEAL. Note • The on-screen display shows the program position or the vide...
Page 15 - Setting the Sleep Timer
Operations -EN 15 Setting the Sleep Timer You can set the TV to turn off automatically after theperiod of time you want. Press SLEEP. To cancel the Sleep Timer, press SLEEP repeatedlyuntil “SLEEP TIMER: OFF” appears, or turn the TV off. After 30 minutes After 60 minutes No Sleep Timer After 90 minut...
Page 16 - Selecting the picture and sound modes; Select
Operations 16 -EN Selecting the picture and sound modes 1 Press MENU. 2 Make sure the cursor ( ” ) appears in the A/V CONTROL menu ( ), and press ENTER. 3 Press V or v to move the cursor ( ” ) to DYNAMIC, STANDARD, SOFT, or PERSONAL,and press ENTER. Select To DYNAMIC Receive high contrast picture wi...
Page 17 - Item
Operations -EN 17 Press V / b Increase the basssound. Increase the treblesound. Increase the rightspeaker's volume. If the picture is slightly snowy You may try to improve the picture by changing theVM setting as described below: 1 Display the VIDEO ADJUST menu. 2 Press V or v to move the cursor ( ”...
Page 18 - To restore the previous sound mode; Press POWER BASSO again.
Operations 18 -EN Listening to thePOWER BASSOsound The POWER BASSO sound enables you to enjoy a highquality sound mode with the best combination of alltypes of sound. It reproduces dynamic and clearsounds and emphasizes low and high audio effects aswell. Press POWER BASSO. The sound mode of the TV p...
Page 20 - System; When receiving a NICAM program; Broadcasting
Operations 20 -EN Receiving area for NICAM and A2 (German)programs System Receiving area NICAM Hong Kong, Singapore, New Zealand, etc. A2 (German) Australia, Malaysia, Thailand, etc. Notes • If the signal is very weak, the sound becomes monaural automatically. • If the stereo sound is noisy when rec...
Page 21 - To restore the normal screen; to move the cursor (
Operations -EN 21 To restore the normal screen Press PROGR INDEX again or PIP.You can also select PROGR INDEX or PIP : OFF fromthe PIP menu, and press ENTER to restore the normalscreen. To view multiple programs on the nine subscreens using the menu 1 Press MENU. 2 Press V or v to move the cursor ( ...
Page 22 - Displaying the PIP screen; To select a TV program, press
Operations 22 -EN With the Picture-in-Picture (PIP) feature, you candisplay a sub screen within the main picture ofdifferent TV programs or video inputs. Displaying the PIP screen You can display the PIP screen using the button on theremote commander or the menu. Press PIP. Selecting a TV program or...
Page 23 - Freezing the PIP screen; The PIP screen will freeze.; Changing the position of the PIP screen
Operations -EN 23 Swapping pictures between the mainand PIP screens Press SWAP. Freezing the PIP screen Press FREEZE. The PIP screen will freeze. To restore the normal screen Press FREEZE again. Notes • When you display a video input on the PIP screen at an abnormal speed, the picture may be noisy d...
Page 24 - Displaying Teletext; Press TEXT to display the Teletext.; Teletext; Viewing Teletext; Using FASTEXT; To access a FASTEXT menu; Selecting a Teletext page; To access the next or previous page; The HOLD symbol “; To resume normal Teletext operation
Operations 24 -EN p KV-E29MH11/E29MN11 only TV stations broadcast an information service calledTeletext via a TV channel.Teletext service allows you to receive variousinformation such as weather forecasts or news at anytime. Displaying Teletext 1 Select a TV channel that carries the Teletextbroadcas...
Page 25 - To conceal the information; Enlarge upper half
Operations -EN 25 Revealing concealed information(REVEAL) The REVEAL option lets you disclose concealedinformation, such as an answer to a quiz that you findon some of the Teletext pages. Press DISPLAY/REVEAL. To conceal the information Press DISPLAY/REVEAL again. Enlarging the Teletext display(ENLA...
Page 27 - To view a video game screen using the menu
Operations -EN 27 To restore the normal picture and soundmodes Press TV, VIDEO/HOLD, or PROGR +/–. Notes • If you press the GAME button when the TV is in the standby mode, the TV turns on automatically and the picture andsound change to the mode that is suitable for a video game. • To display a vide...
Page 28 - Adjusting the picture tilt; Customizing the TV
Operations 28 -EN Adjusting the picture tilt You can adjust the picture tilt if it is not aligned to theTV screen. This may happen due to the direction of theearth’s magnetic fields in relation to the TV position. 1 Press MENU. 2 Make sure the cursor ( z ) appears in the A/V CONTROL menu ( ), and pr...
Page 29 - Troubleshooting; Check the power cord connection.; No color; Dotted lines or stripes; Additional Information
Operations -EN 29 Troubleshooting Good pictureNoisy sound / Check the TV system (TV SYS) setting. No pictureNo sound / Press POWER. / Press MAIN POWER to turn off the TV forabout five seconds and then turn it onagain. / Check the power cord connection. / Check the antenna connection. / Check the VCR...
Page 30 - Specifications; Design and specifications are subject to change without notice.
110-240 V AC, 50/60 Hz Indicated on the rear of TV B/G, I, D/K, M PAL, PAL 60, SECAM, NTSC4.43, NTSC3.58 NICAM Stereo B/G, I ; A2 Stereo (German) B/G KV-E29MH1/E29MH11/E29MN11 English, German, Swedish, Italian, French, Spanish KV-E29MH11/E29MN11 VHF : E2 to E12 / UHF : E21 to E69 /CATV : S01 to S03,...
