Page 3 - Notice for users
ICD-SX700/SX800 4-127-580-11(1) GB The recorded music is limited to private use only. Use of the music beyond this limit requires permission of the copyright holders.Sony is not responsible for incomplete recording/downloading or damaged data due to problems of the IC recorder or computer.Depen...
Page 4 - Table of Contents; Checking the Contents of; Getting Started; Continued directly from “Step 1:; Step 3: Setting the Language to Be; Recording; to Prevent Sound Distortion; Recording sound from a telephone
ICD-SX700/SX800 4-127-580-11(1) GB Table of Contents Checking the Contents of the Package .......................................................... 7Index to Parts and Controls ........................ 8 Getting Started Step 1: Preparing a Power Source ........14 Inserting the batteries............
Page 5 - To record using the synchronized; Playback; Playing back a specified section; Editing Messages; System requirements for your
ICD-SX700/SX800 4-127-580-11(1) GB Recording from Other Equipment.......50 To record using the synchronized recording function ....................................51To record without using the synchronized recording function ....52 Playback Playing Back Messages ................................54...
Page 6 - What You Can Do Using the Digital; Using the IC Recorder as a USB Mass; Troubleshooting; Using a USB AC Adaptor; Disconnecting the IC recorder from
ICD-SX700/SX800 4-127-580-11(1) GB Copying Files from Your Computer to the IC Recorder and Playing Them Back .........................................................................97 Construction of folders and files ......99 Using the Supplied Digital Voice Editor Software .....................
Page 7 - Application Software, Digital Voice
ICD-SX700/SX800 4-127-580-11(1) GB Checking the Contents of the Package IC Recorder (1) Remove the film on the display window before you use the IC recorder. NH-AAA (size AAA) rechargeable batteries (2) Stereo headphones* (1) USB connecting cable (1) Wind Screen (1) Application Software, Digital V...
Page 8 - Refer to the pages indicated in; Front; Opening for a handstrap
ICD-SX700/SX800 4-127-580-11(1) GB Index to Parts and Controls Refer to the pages indicated in parentheses for details. Front Built-in microphone (directional) (28, 36) Built-in microphones (stereo) (28, 36) Operation indicator (15, 18, 27, 54, 91) Display window (10) DIVIDE/ ...
Page 9 - Rear; Speaker
ICD-SX700/SX800 4-127-580-11(1) GB * Connect the supplied or commercially available stereo headphones to the (headphone) jack. If unwanted noise is heard, wipe the headphones plug clean. Rear Speaker HOLD switch (21, 26, 78) NOISE CUT switch (61) DPC switch (59) DIREC...
Page 10 - Display window
ICD-SX700/SX800 4-127-580-11(1) 10 GB Elapsed time/Remaining time/ Recorded date and time indication Folder name/Message title/Artist name/File name indication Battery indicator When rechargeable batteries or dry- cell batteries are used, the indicator shows the remaining battery powe...
Page 14 - Power Source; Remove the film on the display window; Inserting the batteries; While the batteries are charging,
ICD-SX700/SX800 4-127-580-11(1) 1 GB Getting Started Step 1: Preparing a Power Source Remove the film on the display window before you use the IC recorder. Inserting the batteries 1 Slide and lift the battery compartment lid. 2 Insert two NH-AAA rechargeable batteries with correct polarity, and cl...
Page 15 - Disconnecting the IC; Make sure that the operation
ICD-SX700/SX800 4-127-580-11(1) 1 GB G ett in g S ta rte d When you use the IC recorder for the first time, or after you have not used the IC recorder for a certain period of time, it is recommended that you charge the batteries continuously until “ ” is displayed.If the battery indicator is n...
Page 16 - When charging/replacing; Battery remain indication
ICD-SX700/SX800 4-127-580-11(1) 1 GB Tips You can charge the rechargeable batteries by connecting the IC recorder to an AC outlet using a USB AC adaptor (not supplied) (page 125).When replacing the batteries, messages recorded or alarm settings are not erased even when you remove the batteries...
Page 17 - Battery life; When using Sony NH-AAA rechargeable
ICD-SX700/SX800 4-127-580-11(1) 1 GB G ett in g S ta rte d Battery life *1 When using Sony NH-AAA rechargeable batteries Recording Playback *2 through speaker Playback using the headphones LPCM 44/16 *3 Approx. 19 hr. Approx. 16 hr. Approx. 20 hr. LPCM 22/16 *4 Approx. 17 hr. Approx. 15 hr. Approx...
Page 18 - Note while accessing; Note
ICD-SX700/SX800 4-127-580-11(1) 1 GB *1 The battery life may shorten depending on how you operate the IC recorder. *2 When playing back music through the internal speaker with the volume level set to 20 *3 LPCM 44/16: LPCM file recorded using the IC recorder in stereo high-quality recordi...
Page 19 - Continued directly from; Press; Clock
ICD-SX700/SX800 4-127-580-11(1) 1 GB G ett in g S ta rte d Continued directly from “Step 1: Preparing a Power Source” 1 Press or to set the year, month, day, hour, and minute in sequence, then press . “EXECUTING….” appears and the clock is set. 2 Press (stop) to return to the display of t...
Page 21 - To display the current time; Slide the HOLD switch in the direction of; Language to Be Used; You can select the language to be used
ICD-SX700/SX800 4-127-580-11(1) 1 GB G ett in g S ta rte d 5 Press (stop) to return to the display of the stop mode. Tips Press /MENU to return to the previous operation.You can set the time display for the clock to “12-HOUR” or “24-HOUR” in the menu. When “12-HOUR” is set, “AM” or “PM” appea...
Page 22 - The menu mode window will be
ICD-SX700/SX800 4-127-580-11(1) GB 1 Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. 2 Press or to select “DETAIL MENU,” then press . 3 Press or to select “MENU LANGUAGE,” then press . 4 Press or to select the language that you want to use, th...
Page 23 - Step 4: Preparations; Recording at a meeting
ICD-SX700/SX800 4-127-580-11(1) GB G ett in g S ta rte d Step 4: Preparations Required before Recording Recording at a meeting Set “REC LEVEL” to “HIGH ” or “S-HIGH ” in the menu (page 33). Slide the DIRECTNL switch to “ON” to record a voice coming from a specific direction (page 29).Set “LCF (...
Page 24 - Set “REC LEVEL” to “LOW ” in the menu
ICD-SX700/SX800 4-127-580-11(1) GB Sound source Tripod (not supplied) Recording dictation (using the voice recognition software) Set “REC LEVEL” to “LOW ” in the menu (page 33).Slide the DIRECTNL switch to “ON” to record a voice coming from a specific direction (page 29).To transcribe a message...
Page 25 - Turning the IC; When you are not using the IC recorder,
ICD-SX700/SX800 4-127-580-11(1) GB G ett in g S ta rte d To obtain maximum recognition accuracy, hold the IC recorder so that the microphone is about 2 - 3cm from the corner of your mouth.To minimize the sound of your breath in the recordings, do not hold the microphone directly in front of yo...
Page 26 - Tips
ICD-SX700/SX800 4-127-580-11(1) GB Turning the power off Slide the HOLD switch in the direction of the arrow in the stop mode. “HOLD” with the key mark and the current time is displayed, then “POWER OFF” is displayed. The IC recorder turns off within a few seconds. Turning the power on Slide ...
Page 27 - Recording Messages
ICD-SX700/SX800 4-127-580-11(1) GB Re co rd in g Recording Recording Messages 1 Select a folder. Press /MENU to display the folder selection window. Press or to select the folder in which you want to record messages, then press . 2 Start recording. ...
Page 28 - The IC recorder stops at the beginning
ICD-SX700/SX800 4-127-580-11(1) GB The new message will be automatically recorded after the last recorded message. Speak into the built-in microphones. 3 Press (stop) to stop recording. The IC recorder stops at the beginning of the current recording. Tips Before you start recording, we reco...
Page 29 - To; Monitoring the recording
ICD-SX700/SX800 4-127-580-11(1) GB Re co rd in g To Do this pause recording* Press (record/pause). During recording pause, the operation indicator flashes in red and “ “ flashes in the display window. release pause and resume recording Press (record/pause) again. Recording resumes f...
Page 30 - Selecting the
ICD-SX700/SX800 4-127-580-11(1) 0 GB When the DIRECTNL switch is set to “OFF” When the DIRECTNL switch is set to “ON” Selecting the Recording Mode , /MENU The IC recorder is compatible with 3 kinds of codec, LPCM (Linear PCM), MP3, and LPEC. The features offered by each are as follows.L...
Page 32 - Maximum recording time
ICD-SX700/SX800 4-127-580-11(1) GB MP3 192k : Stereo (44.1 kHz/192 kbps, MPEG1 Layer3) You can record with high-quality stereo sound. MP3 128k : Stereo (44.1 kHz/128 kbps, MPEG1 Layer3) You can record with stereo sound. MP3 48k : Monaural (44.1 kHz/48 kbps, MPEG1 Layer3) You can record with ...
Page 33 - Setting the Recording; You can set the recording level in the
ICD-SX700/SX800 4-127-580-11(1) GB Re co rd in g ICD-SX00 LPCM 44/16 mode LPCM 22/16 mode MP3 192k mode 3 hr. 10 min. 6 hr. 25 min. 23 hr. 35 min. MP3 128k mode MP3 48k mode LPEC STHQ mode 35 hr. 25 min. 94 hr. 40 min. 34 hr. 55 min. LPEC ST mode LPEC STLP mode LPEC SP mode 92 hr. 15 min. 177 hr. 4...
Page 35 - Manual Recording
ICD-SX700/SX800 4-127-580-11(1) GB Re co rd in g Manual Recording Mode /MENU When you set “REC LEVEL” to “MANUAL,” you can adjust the recording level manually. 1 Set “REC LEVEL” to “MANUAL” in the menu. For details, see “Setting the Recording Level” (page 33). 2 Select a...
Page 36 - Make other settings for recording
ICD-SX700/SX800 4-127-580-11(1) GB OVER indicator Adjust the maximum level of the sound to about –12 dB. Press and hold or to change the sound level continuously. The sound level is also displayed as a number below the level meter. 5 Make other settings for recording such as “LIMITER,” “...
Page 37 - Setting the Input
ICD-SX700/SX800 4-127-580-11(1) GB Re co rd in g Setting the Input Level Automatically to Prevent Sound Distortion – the Limiter Function , /MENU During the stop or recording mode set “LIMITER” to “ON,” and the input level is set automatically within the maximum input level to prevent t...
Page 38 - To cancel the limiter function
ICD-SX700/SX800 4-127-580-11(1) GB Recording a Few Seconds in Advance, before Starting to Record – the Pre- Recording Function , /MENU The pre-recording function allows you to record sound sources for a maximum of 5 seconds prior to the point when the recording is started. Sounds for ...
Page 39 - This is useful to record during interviews
ICD-SX700/SX800 4-127-580-11(1) GB Re co rd in g 3 Press or to select “PRE REC,” then press . 4 Press or to select “ON,” then press . 5 Press (stop) to exit the menu mode. 6 Select a folder. Press /MENU to display the folder selection window. Press or to select the ...
Page 40 - To cancel the pre-recording
ICD-SX700/SX800 4-127-580-11(1) 0 GB 7 Press and hold (record/pause) to enter the recording standby mode. Sounds for the last 0 to 5 seconds are buffered in the memory. Displays that the sound for 0 to 5 seconds are buffered in the memory. 8 Press (record/pause) to start recording. The standby...
Page 41 - Cutting out Low; To cancel the LCF function
ICD-SX700/SX800 4-127-580-11(1) 1 GB Re co rd in g Cutting out Low Frequency – the LCF Function , /MENU When you set the LCF (Low Cut Filter) function to “ON” in the stop or recording mode, you cut out a frequency of lower than 200 Hz to reduce the roaring noise from wind, etc., this h...
Page 43 - To cancel the VOR function; Notes; Dividing a Message
ICD-SX700/SX800 4-127-580-11(1) GB Re co rd in g The recording starts when the IC recorder detects sound. The recording pauses when no sound is detected and “ ” and “ ” flash. When the IC recorder detects sound again, the recording starts again. To cancel the VOR function Set “VOR” to “OFF” in ...
Page 44 - Tip
ICD-SX700/SX800 4-127-580-11(1) GB Press DIVIDE/ during recording. An animation appears on the display and the new message number is added at the point you pressed the button. The message will be recorded as two messages, however recording continues without stopping. Message 1 Message 2 Messag...
Page 45 - Adding a Recording to
ICD-SX700/SX800 4-127-580-11(1) GB Re co rd in g Adding a Recording to a Previously Recorded Message , /MENU When “ADD/OVERWRITE” in the menu is set to “ADD,” you can add a recording to the message being played back. The added recording will be placed after the current message, a...
Page 46 - The operation indicator will turn red.
ICD-SX700/SX800 4-127-580-11(1) GB 4 Press (stop) to exit the menu mode. 5 When the message to be added is played back, press (record/ pause). “ADD REC? [REC] TO EXECUTE” appears.For details on playback, see page 54. 6 While “ADD REC? [REC] TO EXECUTE” is displayed, press (record/pause). The ...
Page 47 - Adding an Overwrite; Press and hold /MENU to enter
ICD-SX700/SX800 4-127-580-11(1) GB Re co rd in g Adding an Overwrite Recording during Playback , /MENU When “ADD/OVERWRITE” in the menu is set to “OVERWRITE,” you can add an overwrite recording after a selected point in a recorded message. The part of the message after the select...
Page 49 - Recording with an; Recommended microphones
ICD-SX700/SX800 4-127-580-11(1) GB Re co rd in g Recording with an External Microphone Stereo microphone To the (microphone) jack , Tip Before you start recording, we recommend you make a trial recording first. 1 Connect an external microphone to the (microphone) jack when the IC reco...
Page 50 - Recording from Other
ICD-SX700/SX800 4-127-580-11(1) 0 GB Recording sound from a telephone or a cell phone You can use the supplied microphone or the ECM-TL1 headphone-type electret condenser microphone (not supplied) to record sound from a telephone or a cell phone. Insert the earphone of the microphone into your...
Page 51 - To record using the
ICD-SX700/SX800 4-127-580-11(1) 1 GB Re co rd in g Tip Before you start recording, we recommend you make a trial recording first. To record using the synchronized recording function 1 Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. 2 Press or to select “DE...
Page 52 - To record without using
ICD-SX700/SX800 4-127-580-11(1) GB 8 Press (record/pause) to start recording. “ ” flashes and the IC recorder enters the recording pause mode. 9 Start playback on the component connected to the IC recorder. “ ” appears on the display and synchronized recording starts. The synchronized recor...
Page 53 - To the IC
ICD-SX700/SX800 4-127-580-11(1) GB Re co rd in g 5 Press (stop) to exit the menu mode. 6 Connect other equipment to the IC recorder when the IC recorder is in the stop mode. Connect the audio output connector (stereo mini-plug) of other equipment to the (microphone) jack of the IC recorder...
Page 54 - Playing Back; The operation indicator lights in green.
ICD-SX700/SX800 4-127-580-11(1) GB Playback Playing Back Messages 1 Select a folder. Press /MENU. Press or to select the folder, then press . 2 Press or to select the message you want to play. 3 Press to start playback. The operation indicator ligh...
Page 55 - Listening with better sound; To listen with the headphones :; Quickly locating the point you
ICD-SX700/SX800 4-127-580-11(1) GB Pla yb ac k Tip During playback you can lock all the functions of all the buttons so that you can prevent inadvertent operations by sliding the HOLD switch in the direction of the arrow. Listening with better sound quality To listen with the headphones : Conn...
Page 57 - Playing back a message
ICD-SX700/SX800 4-127-580-11(1) GB Pla yb ac k Playing back a message repeatedly During playback, press and hold until “ 1” appears. The selected message will be played back repeatedly. To resume normal playback, press again. Selecting the Playback Mode , /MENU A-B / You can s...
Page 58 - “ A-B” is displayed and the specified
ICD-SX700/SX800 4-127-580-11(1) GB 2 Press or to select “PLAY MODE,” then press . 3 Press or to select “1,” “ ,” “ALL,” “ 1,” “ ,” or “ ALL,” then press . 1 A message is played back.Messages in one folder are played back continuously. ALL All the messages are played back continuousl...
Page 59 - To resume normal playback; Adjusting the
ICD-SX700/SX800 4-127-580-11(1) GB Pla yb ac k To resume normal playback Press . To stop A-B Repeat playback Press (stop). To change the segment specified for A-B Repeat playback During A-B Repeat playback, press (repeat) A-B/ again to specify a new starting point A. Then specify a new ...
Page 60 - Slide the DPC switch to “OFF.”; Reinforcing the Bass; You can set the bass sound you want
ICD-SX700/SX800 4-127-580-11(1) 0 GB 1 Slide the DPC switch to “ON.” 2 Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. 3 Press or to select “DPC,” then press . 4 Press or to adjust the speed of the playback, then press . You can set the speed by 1...
Page 61 - Reducing Distortion; When the NOISE CUT switch is set to
ICD-SX700/SX800 4-127-580-11(1) 1 GB Pla yb ac k 2 Press or to select “EFFECT,” then press . 3 Press or to select the bass sound you want for the playback, then press . BASS 1 The bass sound is reinforced.BASS 2 The bass sound is further reinforced. OFF The bass sound cannot be rein...
Page 62 - During playback set the NOISE CUT; To cancel the Noise Cut function; Set the NOISE CUT switch to “OFF.”
ICD-SX700/SX800 4-127-580-11(1) 62 GB When you are using the built-in speaker, the Noise Cut function does not work. During playback set the NOISE CUT switch to “ON.” High frequency sound High frequency noise such as an electronic device Frequency You can hear the human voice more clearly. Low fre...
Page 64 - Adding a Bookmark; You can add a bookmark at a point in
ICD-SX700/SX800 4-127-580-11(1) GB To cancel the Digital Voice Up function Set “V-UP” to “OFF” in step 3. Adding a Bookmark , /MENU DIVIDE/ You can add a bookmark at a point in a message and use it during playback. You can add only one bookmark in each message.
Page 65 - During playback or stop, press and; To start playback at the
ICD-SX700/SX800 4-127-580-11(1) GB Pla yb ac k During playback or stop, press and hold DIVIDE/ (bookmark) at the position you want to add a bookmark. A bookmark is added and “ ” (bookmark) flashes three times. If you add a bookmark to a message that already has a bookmark, the previously added b...
Page 66 - To record the sound of the IC recorder
ICD-SX700/SX800 4-127-580-11(1) GB Recording with Other Equipment To record the sound of the IC recorder with other equipment, connect the (headphone) jack of the IC recorder to the audio input connector (minijack, stereo) of other equipment using an audio connecting cable* (not suppli...
Page 67 - Playing Back a; You can sound an alarm and start
ICD-SX700/SX800 4-127-580-11(1) GB Pla yb ac k * Optional audio connecting cables (not supplied) To the IC recorder To the other equipment RK-G139 Stereo mini-plug Mini-plug (monaural) RK-G136 Stereo mini-plug Stereo mini-plug Tip Before you start recording, we recommend you to make trial ...
Page 68 - The setting process is finished and “
ICD-SX700/SX800 4-127-580-11(1) GB 1 Select the message you want to play back with an alarm. 2 Enter the alarm setting mode. Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. Press or to select “ALARM,” then press . Press or to sel...
Page 70 - To cancel the alarm setting
ICD-SX700/SX800 4-127-580-11(1) 0 GB To cancel the alarm setting Follow steps 1 and 2 of “To change the alarm setting.” In step 3, select “CANCEL” and press . “CANCEL ALARM?” is displayed. Press or to select “YES,” then press . The alarm will be cancelled and the alarm indicato...
Page 71 - Erasing Messages; Erasing messages one by one; Press ERASE while playing back; To cancel erasing
ICD-SX700/SX800 4-127-580-11(1) 1 GB Ed itin g M es sa ge s Editing Messages Erasing Messages You can erase the recorded messages one by one or all messages in a folder at a time. Note Once a recording has been erased, you cannot retrieve it. Erasing messages one by one ERASE You can erase u...
Page 72 - To erase another message; Proceed with the same steps again from; To erase a part of one message; Divide the message into two messages; Erasing all messages in a; Select the folder containing the
ICD-SX700/SX800 4-127-580-11(1) GB To erase another message Proceed with the same steps again from the beginning. To erase a part of one message Divide the message into two messages first, then proceed with the same steps from the beginning. Erasing all messages in a folder , /MENU 1 Se...
Page 73 - “ERASING ...” with animation appears; Select “NO” in step 4, then press; Moving a Message to
ICD-SX700/SX800 4-127-580-11(1) GB Ed itin g M es sa ge s 3 Press or to select “ERASE ALL,” then press . “ERASE ALL?” appears. 4 Press or to select “YES,” then press . “ERASING …” with animation appears and all messages in the selected folder will be erased. 5 Press (stop) to exit...
Page 74 - To cancel moving the message
ICD-SX700/SX800 4-127-580-11(1) GB 1 Select the message you want to move. 2 Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. 3 Press or to select “MOVE,” then press . The message to be moved will be played back. 4 Press or to select the folder that y...
Page 75 - you are playing back the message
ICD-SX700/SX800 4-127-580-11(1) GB Ed itin g M es sa ge s Dividing a Message into Two DIVIDE , You can divide a message during playback, so that the message is divided into two parts and a new message number is added to the newer part of the divided message. By dividing a message, you can ...
Page 76 - To play the divided message
ICD-SX700/SX800 4-127-580-11(1) GB Notes You need a certain amount of free space in the memory to divide a message. For more information, see “System Limitations” on page 123.When you divide a message with a title and artist name, the newer part has the same title, and artist name.If you divid...
Page 77 - Adding Priority; important messages. There are four; Select the message you want to; The “ ” indicator will flash.; again to add the priority mark.; Each time you press and hold
ICD-SX700/SX800 4-127-580-11(1) GB Ed itin g M es sa ge s Adding Priority Mark(s) – the Priority Mark Function A-B/ You can add priority marks ( ) to important messages. There are four levels, “ ” (the most important), “ ,” “ ,” and no priority mark. You can add priority marks both in the stop...
Page 78 - To cancel the HOLD function
ICD-SX700/SX800 4-127-580-11(1) GB Preventing Accidental Operation – the HOLD function To prevent accidental operation, slide the HOLD switch in the direction of arrow in the recording or playback mode. “HOLD” with the key mark and the current time will appear for 3 seconds indicating that all ...
Page 79 - Utilizing the Menu Function; Making Settings for; To return to the previous window
ICD-SX700/SX800 4-127-580-11(1) GB U tili zin g t he M en u F un cti on Utilizing the Menu Function Making Settings for the Menu 1 Press and hold /MENU to enter the menu mode. The menu mode window will be displayed. 2 Press or to select the menu item for which you want to make setting, then pr...
Page 80 - Menu settings; Menu items
ICD-SX700/SX800 4-127-580-11(1) 0 GB Menu settings Menu items Settings Operation mode ( : the setting can be made/ : the setting cannot be made) Stop mode Playback mode Recording mode REC MODE MP3 , MP3 , MP3 , LPCM , LPCM , LPEC , LPEC , LPEC , LPEC , LPEC REC LEVEL LOW , HI...
Page 93 - Utilizing Your Computer; What You Can Do
ICD-SX700/SX800 4-127-580-11(1) GB U tili zin g Y ou r Co m pu te r Utilizing Your Computer What You Can Do Using the Computer You can do the following when you connect the IC recorder to your computer using the supplied USB connecting cable. Copying files from the IC recorder to your computer t...
Page 94 - To use your computer with the; Hardware Environment:
ICD-SX700/SX800 4-127-580-13(1) 94 GB System requirements for your computer To use your computer with the Digital Voice Editor software To use your computer with the Digital Voice Editor software, see “System requirements” on page 103. To use your computer without the Digital Voice Editor softwar...
Page 96 - Copying Files from the
ICD-SX700/SX800 4-127-580-11(1) GB Disconnecting the IC recorder from your computer Follow the procedures below; otherwise, data may be damaged. 1 Make sure that the operation indicator is not flashing. 2 Disconnect the USB connecting cable connected to the IC recorder from the USB connector of th...
Page 101 - What You Can Do Using the
ICD-SX700/SX800 4-127-580-11(1) 101 GB U tili zin g Y ou r Co m pu te r Using the Supplied Digital Voice Editor Software What You Can Do Using the Digital Voice Editor Software The Digital Voice Editor software allows you to transfer messages that you have recorded using the IC recorder to your ...
Page 102 - Other convenient uses
ICD-SX700/SX800 4-127-580-11(1) 10 GB the IC recorder using the computer. You can also save messages saved on your computer by converting the voice format to a more appropriate one. Other convenient uses You can send voice e-mail messages using MAPI e-mail software.You can transcribe your IC r...
Page 103 - System requirements
ICD-SX700/SX800 4-127-580-13(1) 103 GB U tili zin g Y ou r Co m pu te r System requirements To use the supplied software, your computer must meet the operating system requirements and hardware environment described below. Operating Systems: Windows Vista® Ultimate Windows Vista® Business Windows...
Page 104 - Installing the software; Note on transcribing a message
ICD-SX700/SX800 4-127-580-13(1) 104 GB Installing the software Install the Digital Voice Editor software on your computer’s hard disk. Notes 64 bit versions of Windows® XP are not supported.While installing the software do not connect or disconnect the USB connecting cable. The software may not...
Page 106 - When the [Ready to Install the
ICD-SX700/SX800 4-127-580-13(1) 10 GB 4 Select [Digital Voice Editor], then click [Install]. Follow the instructions on the screen to make the settings required for installation. If you have already installed a previous version of the Digital Voice Editor or any version of the “Memory Stick Voice...
Page 107 - When the [InstallShield Wizard; Uninstalling the software; When you wish to uninstall the software,; For Windows 000 or Windows XP; For Windows Vista
ICD-SX700/SX800 4-127-580-11(1) 10 GB U tili zin g Y ou r Co m pu te r 6 When the [InstallShield Wizard Complete] window appears, select [Yes, I want to restart my computer now], then click [Finish]. The computer will be restarted.When the computer has been restarted, installation is completed. Un...
Page 108 - Referring to the help files; Transferring the files using
ICD-SX700/SX800 4-127-580-11(1) 10 GB Referring to the help files For details on each operation, refer to the help files. Help Transferring the files using the Digital Voice Editor software 1 Connect the IC recorder to your computer using the supplied USB connecting cable (page 95). 2 Start the Di...
Page 109 - Connect the IC recorder to your
ICD-SX700/SX800 4-127-580-11(1) 10 GB U tili zin g Y ou r Co m pu te r Using the IC Recorder as a USB Mass Storage Device When the IC recorder is connected to your computer image data or text data on the computer, as well as messages or files recorded using the IC recorder can be temporarily st...
Page 110 - IC recorder; Symptom
ICD-SX700/SX800 4-127-580-11(1) 110 GB Troubleshooting Troubleshooting Before taking the IC recorder for repair, check the following sections. Should any problem persist after you have made these checks, consult your nearest Sony dealer. IC recorder Symptom Remedy The IC recorder cannot be turned...
Page 117 - Digital Voice Editor; Refer to the Help files of the Digital Voice Editor software, too.
ICD-SX700/SX800 4-127-580-11(1) 11 GB Tro ub le sh oo tin g Digital Voice Editor Refer to the Help files of the Digital Voice Editor software, too. Symptom Remedy The Digital Voice Editor software cannot be installed. The free disk or memory space on the computer is too small. Check the hard dis...
Page 120 - Error messages; Error message
ICD-SX700/SX800 4-127-580-11(1) 10 GB Error messages Error message Cause/Remedy BATTERY LOWER-LEVEL You cannot format the memory or erase all the files in a folder because of insufficient battery power. Prepare new batteries to replace the current ones. LOW BATTERY Batteries are exhausted. Repl...
Page 123 - System limitations; not malfunctions of the IC recorder.
ICD-SX700/SX800 4-127-580-11(1) 1 GB Tro ub le sh oo tin g System limitations There are some system limitations of the IC recorder. Troubles as mentioned below are not malfunctions of the IC recorder. Symptom Cause/Remedy You cannot record messages up to the maximum recording time. If you record...
Page 125 - Additional Information; Using a USB AC; Connect the USB connecting cable
ICD-SX700/SX800 4-127-580-11(1) 1 GB A dd itio na l In fo rm ati on Additional Information Using a USB AC Adaptor (not supplied) You can charge the rechargeable batteries by connecting the IC recorder to an AC outlet using a USB AC adaptor AC-U50A (not supplied). You can charge the batteries whi...
Page 127 - Precautions; On power
ICD-SX700/SX800 4-127-580-11(1) 1 GB A dd itio na l In fo rm ati on During recording (the operation indicator lights or flashes in red) or accessing data (the operation indicator flashes in orange), the IC recorder should not be connected to or disconnected from the USB AC adaptor connected to...
Page 129 - Specifications; IC recorder section
ICD-SX700/SX800 4-127-580-11(1) 1 GB A dd itio na l In fo rm ati on Specifications IC recorder section Capacity (User available capacity) ICD-SX700: 1 GB (approx. 970 MB =1,017,610,240 Byte) ICD-SX800: 2 GB (approx. 1.9 GB =2,047,737,856 Byte) A part of the memory capacity is used as a management ...
Page 131 - Index
ICD-SX700/SX800 4-127-580-11(1) 11 GB In de x Index A A-B Repeat .....................................................................58Adding an Overwrite Recording ..............47, 86Adding a Recording .........................................45, 86Adjusting the volume .............................
Page 135 - Trademarks
ICD-SX700/SX800 4-127-580-11(1) 1 GB In de x Trademarks Microsoft, Windows, Windows Vista, Windows Media, Outlook, DirectX and logos are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Apple and Macintosh are trademarks of Apple Inc., re...