Sony DX100 - Manual

5 Location and Function of Controls Ove rv ie w Remote Commander Control Panel Keys a Turning on the power/Going to standby mode ? / 1 (On/Standby) key b Selecting an input signal (page 9)INPUT key c Operating a menu (page 14)MENU keyRESET keyENTER / V / v / B / b (arrow) keys RETURN key d Adjusting...

7 Connecting the Projector P re par a tio n B Preparation Connecting the Projector • Make sure all the equipment is powered off when connecting the projector.• Use the proper cables for each connection.• Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or ca...

8 Connecting the Projector Connections with a DVD player or BD player are explained for each input signal. VIDEO For connecting video equipment with a video output connector. INPUT A For connecting video equipment with a YP B P R output connector. INPUT B • Use HDMI-compatible equipment and cable(s)...

9 Projecting an Image Proj ecting/A dj usting an I m age B Projecting/Adjusting an Image Projecting an Image The size of a projected image depends on the distance between the projector and screen. Install the projector so that the projected image fits the screen size. For details on projection dista...

10 Projecting an Image Displaying a pattern for adjusting an image You can display a pattern for adjusting the projected image with the PATTERN key on the remote commander. Press the PATTERN key again to restore the previous image. Adjusting the Projected image Focus Size (Zoom) Position Focus ring ...

11 Projecting an Image Proj ecting/A dj usting an I m age Adjusting the tilt of the projector with the foot adjust button/rear feet (adjustable) By changing the tilt of the projector with the foot adjust button/rear feet (adjustable), you can adjust the position of the projected image. 1 Press and h...

12 Projecting an Image Correcting trapezoidal distortion of the projected image (Keystone feature) * 1 Keystone feature *2 may not work automatically when the screen is tilted. In this case, set keystone manually. 1 Press the KEYSTONE key on the remote commander or select V Keystone in the Installat...

13 Projecting an Image Proj ecting/A dj usting an I m age 1 Press the ? / 1 key on the unit or the remote commander. The projector starts shutdown and turns off. If you press the ? / 1 key within 10 seconds of the message being displayed, shutdown is canceled. 2 Unplug the AC power cord from the wal...

14 Using a MENU B Adjustments and Settings Using a Menu Using a MENU The menu displays used for the explanation below may be different depending on the model you are using. 1 Press the MENU key to display the menu. 2 Select the setting menu. Use the V / v key to select the setting menu then press th...

15 The Picture Menu A d ju s tm e nt s an d Set tin g s U s in g a M enu The Picture Menu The Picture is used to adjust the picture for each input signal. *1: When a computer signal is input, this option is available.*2: The settings in the Picture return to their factory defaults, except for Pictur...

16 The Screen Menu The Screen Menu The Screen menu is used to adjust the size, position and aspect ratio of the projected image for each input signal. Items Item descriptions Aspect *1 Changes the aspect ratio of the projected image (page 18). VPL-DX140/DX120/DX100 : When the computer signal is inpu...

18 The Screen Menu Aspect VPL-DX140/DX120/DX100 *1: If you select “Normal,” the image is projected in the same resolution as the input signal without changing the aspect ratio of the original image. *2: If you select “4:3,” the image is projected to fit the projected image size, regardless of the as...

20 The Function Menu The Function Menu The Function menu is used for setting various functions of the projector. *1: APA functions when a computer signal is input via the RGB input connector (INPUT A). Items Item descriptions Volume The higher the value, the louder an audio volume and the lower the ...

21 The Operation Menu A d ju s tm e nt s an d Set tin g s U s in g a M enu The Operation Menu The Operation menu is used for setting for the operations by using the menu or the remote commander. *1: You will not be able to use the projector if you forget your password. If you call qualified Sony per...

22 The Connection/Power Menu The Connection/Power Menu The Connection/Power menu is used for setting for the connections and power. *1: This may not be optimum depending on the input signal. In this case, set manually according to the connected equipment. *2: Select “Off” to avoid entering standby m...

23 The Installation Menu A d ju s tm e nt s an d Set tin g s U s in g a M enu The Installation Menu The Installation menu is used for installing the projector. *1: When “High Altitude Mode” is set to “On,” the speed of the fan increases, and the fan noise becomes slightly louder. *2: Since the Keyst...

24 The Information Menu The Information Menu The Information menu is used to check projector status, such as total usage time of the lamp. *1: These items may not be displayed depending on the input signal. Items Item descriptions Model Name Displays the model name. Serial No. Displays the serial nu...

25 Indicators Oth e rs B Others Indicators The indicators allow checking the status and notify you of abnormal operation of the projector.If the projector exhibits abnormal status, address the problem in accordance with the table below. ON/STANDBY indicator LAMP/COVER indicator Status Meaning/Remedi...

26 Messages List Messages List When any of the messages listed below appears on the projected image, address the problem in accordance with the table below. Messages Meaning/Remedy Page High temp.! Lamp off in 1 min. Check the items below.• Check if nothing is blocking the ventilation holes.• Check ...

27 Troubleshooting Oth e rs Troubleshooting Before asking to have the projector repaired, try to diagnose the problem, following the instructions below. Symptoms Remedy Page The power is not turned on. Check if the AC power cord is firmly connected. – When the “Control Key Lock” is set to “On,” you ...

29 Replacing the Lamp Oth e rs Replacing the Lamp Replace the lamp with a new one if a message displayed on the projected image (page 26).Use an LMP-D213 projector lamp (not supplied) for replacement. • The lamp remains hot after the projector is turned off. If you touch the lamp, you may burn your ...

30 Replacing the Lamp Do not put your hands into the lamp replacement slot, and do not allow any liquid or other objects into the slot to avoid electrical shock or fire . 4 Insert the new lamp all the way in until it is securely in place ( 1 ). Tighten the two screws ( 2 ). Fold down the handle to r...

31 Cleaning the Air Filter Oth e rs Cleaning the Air Filter When a message appears on the projected image indicating time for a filter cleaning, clean the air filter (page 26).If the dust cannot be removed from the air filter even after cleaning, replace the air filter with a new one. For details on...

32 Specifications Specifications Items Descriptions Model VPL-DX140/DX120/DX100/VPL-DW120 Projection system 3 LCD system Display device Effective display size VPL-DX140/DX120/DX100: 0.63 inch (16.0 mm), 3 plate panels, Aspect ratio 4:3VPL-DW120: 0.59 inch (15.0 mm), 3 plate panels, Aspect ratio 16:1...

33 Specifications Oth e rs *1: For details, refer to “Acceptable Input Signals*1” on page 36.*2: Information on accessories in this manual is current as of June 2012.*3: Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer. INPUT O...

35 Specifications Oth e rs Pin assignment HDMI connector (HDMI, female) RGB input connector (Mini D-sub 15-pin, female) 1 T.M.D.S. Data2+ 11 T.M.D.S. Clock Shield 2 T.M.D.S. Data2 Shield 12 T.M.D.S. Clock – 3 T.M.D.S. Data2 – 13 N.C. 4 T.M.D.S. Data1+ 14 RESERVED (N.C.) 5 T.M.D.S. Data1 Shield 15 SC...

36 Specifications Acceptable Input Signals *1 Computer signal Digital TV signal *4 Analog TV signal *1: • When a signal other than the signals listed in table is input, the picture may not be displayed properly. • An input signal meant for screen resolution different from that of the panel will not ...

37 Projection Distance Oth e rs Projection Distance The projection distance is the distance between the front of the lens and the surface of the projected image. The following describes the projection distance and height from the center of the lens to edge of screen by each projected screen size. He...

38 Projection Distance Ceiling Installation L: Projection distance LH: Height H from center of lens to edge of screen Projection distance L Height H from center of lens to edge of screen Center of lens Projected image A Top side

42 Dimensions Dimensions Top Unit: mm (inches) 230 .5 (9 1 / 16 ) 315 (12 13 / 32 ) 7. 5 ± 1 ( 9 / 32 ) 11. 9 ± 1 ( 15 / 32 ) 2. 5 ( 3 / 32 ) VPL-DX120/DX100 Edge of lens VPL-DX140/DW120 Edge of lens Front Unit: mm (inches) 75 (2 15 / 16 ) 157.5 (6 3 / 16 ) 81 (3 3 / 16 ) 26 (1 1 / 32 ) 46. 3 (1 13 ...

45 Index Oth e rs Index A AC IN ........................................................ 4Acceptable input signal ........................... 36Adjust Signal ........................................... 17Air filter ................................................... 31Air filter cover/Ventilation ho...

46 Index S Security bar ............................................... 3Security Lock ...................................... 3, 21Selecting an input signal ........................... 5Serial No. ................................................ 24Sharpness .............................................