Page 2 - Warning; WARNING; Information; About this manual
Introduction 2 CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Warning To prevent fire or shock hazard, donot expose the player to rain ormoisture. This symbol is intended to alertthe user to the presence ofuninsulated “dangerous voltage”within the product's enclosurethat may be of sufficientmagnitud...
Page 3 - Table of contents; Basic Operations; Playing a CD; The CD Player
3 Introduction Basic Operations CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Table of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape The CD Player 12 Using the display 13 Locating a specific track 14 Playing tracks repeatedly(Repeat Play) ...
Page 4 - Close the CD compartment.
Basic Operations 4 CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 For hookup instructions, see pages 16-18. 1 Set FUNCTION to CD. 2 Press OPEN/CLOSE to open theCD compartment and place theCD on the CD compartment. 3 Close the CD compartment. 4 Press ^ . The player plays all the tracksonce. Playing a...
Page 5 - Use these buttons for additional operations
Basic Operations Basic Operations 5 CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Use these buttons for additional operations To Do this Adjust the volume Turn VOLUME. Stop playback Press p . . Pause playback Press ^ . Press the button again toresume play after pause. Go back to the previous track ...
Page 6 - Listening to the radio
Basic Operations 6 CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Listening to the radio For hookup instructions, see pages 16-18. 1 Set FUNCTION to FM or AM toselect the band you want. 2 Turn TUNING to tune in a radiostation. If the received FM stereo is tooweak, the reception becomesmonaural. 1 2
Page 7 - To improve broadcast reception
Basic Operations Basic Operations 7 CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Use these buttons for additional operations VOLUME FUNCTION To Do this Adjust the volume Turn VOLUME . Turn off the radio Set FUNCTION toTAPE (CD/RADIO OFF) . To improve broadcast reception Reorient the antenna for FM...
Page 8 - Playing a tape; Press
Basic Operations 8 CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Playing a tape For hookup instructions, see pages 16-18. 1 Set FUNCTION toTAPE (CD/RADIO OFF) . 2 Press p6 to open the tape compartment and insert arecorded tape. Use TYPE I(normal) tape only. Close thecompartment. 3 Press ( . The pla...
Page 10 - Recording on a tape
Basic Operations 10 CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Recording on a tape For hookup instructions, see pages 16-18. 1 Press p6 to open the tape compartment and insert a blanktape. Use TYPE I (normal) tapeonly. 2 Select the program source youwant to record. To record from the CD player, ...
Page 12 - Using the display; Checking the total track numbers and playing; Check the display in stop mode.; Checking the remaining time
The CD Player 12 CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Using the display You can check information about the CDusing the display. The CD Player Checking the total track numbers and playing time Check the display in stop mode. DISPLAY/ENTER Total playing time Total track numbers Checking the...
Page 13 - only
13 The CD Player The CD Player CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Locating a specifictrack You can quickly locate any track usingthe number buttons ( CFD-Z120/Z130 only ). You can also find a specific point in a track while playing a CD. Numberbuttons = / + Note (CFD-Z120/Z130 only) You ...
Page 14 - When you’ve selected REP 1,; To cancel Repeat Play
The CD Player 14 CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Playing tracksrepeatedly (Repeat Play) You can play tracks repeatedly innormal, shuffle or program play modes(see page 15). 1 Set FUNCTION to CD. 2 Press PLAY MODE until the repeat mode youwant appears in the display. To repeat Select a...
Page 15 - To cancel Program Play; To check the order of tracks before play; To change the current program
15 The CD Player The CD Player CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Creating yourown program (Program Play) You can arrange the playing order of thetracks on a CD. FUNCTION =/+ 1 Set FUNCTION to CD. 2 Press PLAY MODE until “PGM” appears in thedisplay. 3 Press + or = then press DISPLAY/ENTE...
Page 16 - Setting Up; Hooking up the speakers
Setting Up 16 CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Setting Up Hooking up thesystem Make sure you turn off the power beforemaking any connections. Leftspeaker Speaker cords Rightspeaker AC IN 1 Hooking up the speakers 1 Align the grooves and slide the speaker box downuntil it snaps into pla...
Page 17 - Replacing batteries; Using the player on batteries
17 Setting Up Setting Up CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 3 Connect the black wires to (-) minus and the redwires to (+) plus terminals; the right speaker wiresto the RIGHT and the left speaker wires to theLEFT terminals of SPEAKER OUTPUT. 2 Connecting the AC power sources Insert one e...
Page 18 - Hooking up the system; Insert the headphones to the PHONES jack at the rear.
Setting Up 18 CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Hooking up the system (continued) 5 Listening through the headphones Insert the headphones to the PHONES jack at the rear. PHONES
Page 20 - Precautions; On safety
Additional Information 20 CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Precautions On safety • As the laser beam used in the CD player section is harmful to the eyes,do not attempt to disassemble thecasing. Refer servicing to qualifiedpersonnel only. • Should any solid object or liquid fall into t...
Page 21 - Notes on CDs
21 Additional Information CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from thecenter out. • Do not use solvents such as benzine, thinner, commercially availablecleaners or anti-static spray intendedfor vinyl LPs. • Do ...
Page 22 - Troubleshooting; General
Additional Information 22 CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Troubleshooting Remedy • Connect the AC power cord securely.• Make sure the batteries are inserted correctly. • Make sure the FUNCTION selector is set to the function you want to operate. • Adjust the volume.• Unplug the headph...
Page 23 - Tape Player
23 Additional Information CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Symptom The tape does not record. The audio is weak/The audioquality is poor. The sound is distorted. The remote does not function. Remedy • Make sure the tape is inserted properly.• Make sure the safety tab of the cassette is ...
Page 24 - Cleaning the lens; Maintenance; Demagnetizing the tape heads
Additional Information 24 CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Cleaning the lens If the lens becomes dirty, it may cause askipping of sound during CD operation.Clean with a commercially availableblower. Cleaning the tape heads and tapepath Wipe the heads, the pinch roller and thecapstan wi...
Page 25 - Specifications; Other Specifications
25 Additional Information CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTALHARMONIC DISTORTIONWith 3.2-ohm loads, both channel drivenfrom 150 - 10,000 Hz; rated 2 W per channel-minimum RMS power, with no more than10 % total harmonic disto...
Page 26 - Index
Additional Information 26 CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92 Index A Audio emphasis 19 B Batteries for player 17 C CD player 12Choosing power sources 17Cleaning cabinet 23lens 23tape heads and tape path23 Creating your ownprogram 15 D, E, F, G Demagnetizing the tapeheads 24Display 12 H H...
