Page 2 - Warning; CAUTION; Information
2 Warning To prevent fire or shock hazard,do not expose the player to rainor moisture. This symbol is intended to alertthe user to the presence ofuninsulated “dangerous voltage”within the product's enclosure thatmay be of sufficient magnitude toconstitute a risk of electric shockto persons. This sym...
Page 3 - Table of contents; Basic Operations
Basic Operations 3 Table of contents Basic Operations Playing a CD .................................................. 4Listening to the radio ...................................... 6Playing a tape ................................................. 8Recording on a tape ...................................
Page 4 - Playing a CD
4 Connect the supplied AC power cord (see page 24). 1 Press Z PUSH OPEN/CLOSE down to open the CD compartment andplace the CD on the CDcompartment. 2 Close the lid of the CD compartment. 3 Press u ( N on the remote). The player turns on (direct power-on)and plays all the tracks once. Basic Operation...
Page 6 - Listening to the radio
6 Listening to the radio Connect the supplied AC power cord (see page 24). 1 Press RADIO BAND•AUTOPRESET until the band you wantappears in the display (direct power-on). 2 Hold down TUNE + or – until thefrequency digits begin to change inthe display. The player automatically scans theradio frequenci...
Page 7 - To improve broadcast reception
Basic Operations 7 Use these buttons for additional operations To Press adjust the volume VOLUME +, –(VOL +, – on the remote) turn on/off the radio POWER To improve broadcast reception Reorient the antenna for FM. Reorient the player itself forAM. for FM for AM Tip If the FM broadcast isnoisy, press...
Page 8 - Playing a tape; Press
8 Playing a tape Connect the supplied AC power cord (see page 24). 1 Press xZ to open the tape compartment and insert a recordedtape. Use TYPE I (normal) tape only.Close the compartment. 2 Press n . The player turns on (direct power-on)and starts playing. With the side you wantto play facing you Dis...
Page 10 - Recording on a tape
10 Recording on a tape Connect the supplied AC power cord (see page 24). 1 Press xZ to open the tape compartment and insert a blank tape.Use TYPE I (normal) tape only. 2 Select the program source you wantto record. To record from the CD player, inserta CD (see page 4) and press x on the CD section. ...
Page 11 - Use these buttons for additional operations
Basic Operations 11 3 Press z to start recording ( n is depressed automatically). Use these buttons for additional operations Tips • Adjusting the volume or the audio emphasis (see page18) will not affect therecording level. • If the AM program makes a whistling sound after you'vepressed z in step 3...
Page 12 - The CD Player; Using the display; Checking the remaining time; Press DSPL•ENT MEM while playing a CD.; Press DSPL•ENT MEM in stop mode.
12 The CD Player Using the display You can check information about the CDusing the display. Checking the remaining time Press DSPL•ENT MEM while playing a CD. To display Press DSPL•ENT MEM the current track number once and remaining timeon the current track* the number of tracks left twice and remai...
Page 13 - To cancel Repeat Play
13 The CD Player Playing tracksrepeatedly (Repeat Play) You can play tracks repeatedly in normal,shuffle or program play modes (see page14). 1 Press x . “Cd” appears in the display. 2 Proceed as follows. To repeat a single track all the tracks tracks inrandom order programedtracks x MODE Jog dial u ...
Page 14 - To cancel Shuffle Play
14 1 Press x . “Cd” appears in the display. 2 Press MODE until “PGM” appears inthe display. 3 Turn the jog dial to select the track youwant to program, and press DSPL•ENTMEM.Repeat this step. 4 Press u to start program play. Creating your ownprogram (Program Play) You can arrange the playing order o...
Page 15 - To cancel Program Play
15 The CD Player On the remote 1 Press x . 2 Press MODE until “PGM” appears in the display. 3 Press the number buttons for the tracks you want to program in the order you want. 4 Press N . To cancel Program Play Press MODE until “PGM” disappears fromthe display. To check the order of tracksbefore pl...
Page 16 - The Radio; Presetting radio stations; Tune in a station you want.
16 The Radio Presetting radio stations You can store radio stations into the player’smemory. You can preset up to 30 radiostations, 20 for FM and 10 for AM in anyorder. 1 Press RADIO BAND•AUTO PRESETto select the band. 2 Hold down RADIO BAND•AUTOPRESET for 2 seconds until “AUTO”appears in the displa...
Page 18 - The Audio Emphasis; Reinforcing the bass sound
18 The Audio Emphasis Selecting the audioemphasis (MEGA BASS) You can adjust the audio emphasis of thesound you are listening to. Reinforcing the bass sound Press MEGA BASS.“MEGA BASS” appears in the display.To return to normal sound, press the buttonagain. MEGA BASS
Page 19 - The Timer; Setting the clock
The Timer 19 Before you set the clock, connect the powersource (see page 24). 1 Press MENU•ALARM until “CLOCK”appears in the display, then pressDSPL•ENT MEM.The hour digit flashes. 2 Turn the jog dial to set the current hour.Then press DSPL•ENT MEM.The minute digits flash. Set the minutesby turning ...
Page 20 - indication lights up and the; Waking up to music; Before you begin, make sure the
20 4 Set the timer to the hour you want themusic to start by turning the jog dial,then press DSPL•ENT MEM. Set the minutes, then press DSPL•ENTMEM. 5 Set the timer to the hour and theminutes you want the music to go off.(Do as step 4.) 6 Turn the jog dial to set the volume, thenpress DSPL•ENT MEM. 7...
Page 21 - Falling asleep to music; Play the music source you want.; To stop play; Press POWER to turn off the power.
The Timer 21 Falling asleep to music You can set the player to turn offautomatically after 10, 20, 30, 60, 90, and120 minutes, allowing you to fall asleepwhile listening to music. 1 Play the music source you want. 2 Press MENU•ALARM until “SLEEP”appears in the display, and pressDSPL•ENT MEM. 3 Turn ...
Page 22 - To cancel the sleep function
22 Using the countdowntimer You can set the player to sound music orbeep after a preset period of time, which isuseful as a kitchen timer, etc. 1 Press MENU•ALARM for 2 secondsuntil “ALARM” appears in the display. 2 Turn the jog dial to display the time(OFF, 1 to 60 minutes) for the alarmand press D...
Page 23 - To stop the alarm
The Timer 23 4 Turn the jog dial to select the sound forthe alarm by and press DSPL•ENTMEM. Display Sound for alarm bEEP beep MUSIC “La primavera (Spring)”from “Le Quattro Stagioni(The Four Seasons)” byVivaldi 5 Press DSPL•ENT MEM to turn on thecountdown timer.The countdown timer starts to countdown...
Page 24 - Setting Up; Choosing the power sources; You can use the AC power or batteries as a power source.; Replacing batteries; Take out the batteries as illustrated.
24 Setting Up Choosing the power sources You can use the AC power or batteries as a power source. 1 Inserting the back-up batteriesInsert three size AA (R6) batteries (notsupplied) into the battery compartment.These batteries work to save thememory data. AC IN Replacing batteries Take out the batter...
Page 25 - Inserting batteries into the remote
Setting Up 25 2 Connecting the AC power cordInsert one end of the supplied ACpower cord to the AC IN socket locatedat the rear of the player, and the otherend to the wall outlet. 3 Inserting batteries into the remote Insert two size AA (R6) batteries (notsupplied) Replacing batteries With normal use...
Page 26 - Additional Information; Precautions; On safety
26 Additional Information Precautions On safety • As the laser beam used in the CD player section is harmful to the eyes, do notattempt to disassemble the casing. Referservicing to qualified personnel only. • Should any solid object or liquid fall into the player, unplug the player, and have itcheck...
Page 27 - Troubleshooting; General; CD Player; Notes on CDs
27 Troubleshooting General The power is not on. • Connect the AC power cord to the AC IN socket and a wall outlet securely. • Make sure the batteries are inserted correctly.• Replace all the batteries with new ones if they are weak. • You cannot turn on the player with the remote when you operate th...
Page 29 - Maintenance; Cleaning the lens
29 Demagnetizing the tape heads After 20 to 30 hours of use, enough residualmagnetism will have built up on the tapeheads to begin to cause loss of highfrequency sound and hiss. At this time, youshould demagnetize the heads and all metalparts in the tape path with a commerciallyavailable tape head d...
Page 30 - Specifications
30 Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONICDISTORTIONWith 4-ohm loads, both channels driven from100 - 10,000 Hz; rated 1.5 W per channel-minimum RMS power, with no more than 10 %total harmonic distortion in AC operation. Other Specifications CD player section System ...
Page 31 - Index
31 Index A Alarm 22 Audio emphasis 18 B Batteries for memory 24 for player 25 for remote 25 C CD player 12 Choosing power sources 24 Cleaning cabinet 29 tape heads and tape path29 Connecting AC power cord 25 Count down timer 22 Creating your own program 14 D, E, F, G, H Demagnetizing the tape heads ...
Page 32 - Sony Corporation
