Sony BDV-HZ970W - Manual
Sony BDV-HZ970W – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
2
Thread the speaker cord (
) into the bottom of the post (
or
) and
out the opposite end.
You can choose either the long posts (
) or the short posts (
) to assemble the
speakers.
Screw holes
or
3
Thread the speaker cord (
) through the hole on the bottom of the
speaker (
) and out the hole on the rear.
4
Insert the post (
or
) into the hole on the bottom of the speaker
(
), so that the screw on the top of the post faces the front of the
speaker.
Screw
or
5
Secure the post (
or
) with the screws (
).
or
6
Connect the speaker cord (
). Then, secure the speaker cord by running
it through the slit.
Connect the speaker cord with the colored tube to
, and the speaker cord without the
colored tube to
.
Colored
tube
Slit
Label
Note
Match the color of the tube and label.
Continued
Speaker Installation
Guide
4-187-308-
11
(1)
BDV-HZ970W
© 2010 Sony Corporation Printed in Malaysia
(1)
Assembling the front speakers
Required parts
×2
×2
×8
×2
Front speaker (R):
with red colored tube
Front speaker (L):
with white colored tube
×2
×2
1
Thread the speaker cord (
) through the bottom hole in the base
(
).
Colored tube
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
