Page 2 - WARNING
2 GB 3 Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatu...
Page 3 - Table of Contents
3 GB WARNING ..............................................4CAUTION................................................5Precautions ...............................................6 Getting Started Supplied accessories ................................7Setting this stand .....................................
Page 5 - Do not step on the stand.; Note on load capacity; CAUTION
5 GB Do not place any heated objects such as a hot pan or a kettle on the stand. A top glass panel may break and cause injury. Or, it may cause damage to the stand. Do not step on the stand. You may fall, or break the glass and cause injury. Do not subject the top glass panel to excessive shock. Thi...
Page 6 - Copyrights; Precautions
6 GB On safety • Do not place unspecified objects, such as a flower vase or pottery on the stand. • Do not make alterations to the stand. • Should any solid object or liquid fall into the stand, unplug the stand and have it checked by qualified personnel before operating it any further. On power sou...
Page 7 - Inserting batteries into the remote; Getting Started; Supplied accessories; • Digital optical cord for a TV
Gettin g Sta rted 7 GB Inserting batteries into the remote You can control the stand using the supplied remote. Insert two size AA (R6) batteries by matching the + and – ends on the batteries to the markings inside the compartment. • Do not leave the remote in an extremely hot or humid place. • Do n...
Page 8 - About the installation position; Installing the shelf board; Place the TV on the stand.; Setting this stand
8 GB About the installation position Install the stand after connecting all the components to the stand.Install the stand after allowing for a space of more than 1 cm from the wall. This is to allow for heat dissipation and to prevent the TV from falling. Installation of the stand requires two or mo...
Page 9 - Arranging the cables
Gettin g Sta rted 9 GB 3 Fasten the support belt to the stand with a wood screw. You can fasten a wood screw to the centrally-positioned hole on the rear of the stand.For details on acquiring the support belt and screws, refer to the operating instructions supplied with Sony LCD TV. Arranging the ca...
Page 10 - Connecting the TV and player
10 GB Connect the TV and/or player with HDMI jacks to the stand using an HDMI cable.By connecting Sony “BRAVIA” Sync-compatible components using HDMI cables, operation can be simplified when you set the Control for HDMI function for the TV. See ““BRAVIA” Sync Features” (page 24). • The stand is comp...
Page 11 - images may not be displayed properly.
Gettin g Sta rted 11 GB • Even if the stand is turned off (active standby mode), the HDMI signal will be sent from the connected component to the TV via the HDMI connection. You can enjoy image and sound from the component on the TV. Notes on HDMI connections • Use a High Speed HDMI cable. If you us...
Page 12 - Connecting satellite tuner or cable television tuner
12 GB When connecting a satellite tuner or cable television tuner that does not have an HDMI jack, set “CTRL HDMI” to “OFF” in the AMP menu of the stand (page 25). * Depending on the satellite tuner, multi-channel sound may not be output. In this case, connect a digital optical cord in addition to a...
Page 13 - Connecting other components
Gettin g Sta rted 13 GB When connecting components that do not have HDMI jacks, such as a “PlayStation 2” or a DVD player, etc., set “CTRL HDMI” to “OFF” in the AMP menu of the stand (page 25). Even if “CTRL HDMI” is set to “ON,” you can enjoy a video cassette recorder, etc., that does not have surr...
Page 14 - Connecting the AC power cord (mains lead); Setting up the sound output of the connected component
14 GB • Be sure to fully extend the FM wire antenna (aerial). • After connecting the FM wire antenna (aerial), keep it as horizontal as possible. • Do not connect or disconnect the DIGITAL MEDIA PORT adapter while the stand is turned on. • When you connect the DIGITAL MEDIA PORT adapter, be sure the...
Page 15 - tio; INPUT SELECTOR; Playback Options; Index to parts and controls
15 GB P layb a ck Op tio n s For more information, see the pages indicated in parentheses. Front panel buttons and indicator A INPUT SELECTOR Press to select the input source to play back.Each time you press the button, the input source changes cyclically as follows:TV t BD t DVD t SAT/CATV t AUDIO ...
Page 16 - Front panel display; About the indications in the front panel display; Audio format indicators
16 GB Front panel display About the indications in the front panel display A Audio format indicators Light up according to the audio format that is being input to the stand. D : Dolby DigitalPLII : Dolby Pro Logic II LPCM : Linear PCMDTS B NIGHT (30) Lights up in NIGHT MODE. C SLEEP (31) Flashes whe...
Page 17 - Remote control
17 GB P layb a ck Op tio n s Remote control Buttons for the operation of this stand A ?/1 (on/standby) B LEVEL Press to adjust the level of the center speaker and subwoofer. This setting is applied to all sound fields. C AMP MENU (page 28) D C , X , x , c or Press C , X , x or c to select the settin...
Page 18 - Enjoying TV
18 GB 1 Turn on the TV and choose a program. Refer to the operating instructions of your TV for details. 2 Turn the stand on. 3 Press INPUT SELECTOR +/– repeatedly until “TV” appears in the front panel display. 4 Adjust the volume by pressing VOLUME +/–. • The sound may be output from the TV’s speak...
Page 20 - To change the preset number; The last received station is tuned in.; Tuner Functions; Presetting radio stations; Listening to the radio
20 GB You can preset 20 FM stations. Before tuning, make sure to turn down the volume to minimum. 1 Press INPUT SELECTOR +/– repeatedly until “FM” appears in the front panel display. 2 Press and hold TUNING +/– until the auto scanning starts. Scanning stops when the system tunes in a station. “TUNED...
Page 21 - Press; If you enter a wrong character; Naming preset stations
21 GB T uner F unct ions To turn off the radio Press " / 1 to turn off the stand. To change to another function, press INPUT SELECTOR +/–. To listen to non-preset radio stations Use manual or automatic tuning in step 2. For manual tuning, press TUNING +/– repeatedly.For automatic tuning, press a...
Page 22 - Receiving RDS broadcasts; Simply select a station.
22 GB Each time you press DISPLAY, the station name and the frequency alternate in the front panel display. • The station name is displayed if you have entered a name for a preset station. • The frequency in the front panel display switches to the station name after several seconds. What is the Radi...
Page 23 - Selecting the sound field; Available sound fields; Surround Function
23 GB Surr oun d Fun ctio n Selecting the sound field This stand can create multi-channel surround sound. You can select one of stand’s optimized pre-programmed sound fields. Press SOUND FIELD +/–. The present sound field appears in the front panel display. Each time you press SOUND FIELD +/–, the d...
Page 24 - “BRAVIA” Sync Features; What is “BRAVIA” Sync?
24 GB By connecting Sony components that are compatible with “BRAVIA” Sync via an HDMI cable (not supplied), operation is simplified as below:• One-Touch Play (page 25)• System Audio Control (page 26)• System Power Off (page 26) “BRAVIA” Sync is compatible with Sony TVs, Blu-Ray Disc/DVD players, AV...
Page 25 - The AMP menu turns off.
25 GB “BRA VIA” Sy nc F e a tu re s If “COMPLETE” does not appear after performing the steps above Set the Control for HDMI function to on for both the stand and the connected component individually. 1 Press AMP MENU. 2 Press X / x repeatedly until “SET HDMI” appears, then press or c . 3 Press X / x...
Page 26 - MAX
26 GB You can enjoy the TV sound from the speakers of the stand by means of a simple operation. You can also adjust the volume and turn off the sound of the stand using the TV remote. For details, refer to the operating instructions of the TV. Press ?/1 to turn on the stand. The sound is output from...
Page 27 - • AUTO: When the TV is turned on while
27 GB “BRA VIA” Sy nc F e a tu re s If a “BRAVIA” Sync-compatible TV is connected to the stand, and the TV is turned off, HDMI signal transmission stops, and power consumption is reduced.The default setting is “AUTO.” • This function is available only when “CTRL HDMI” is set to “ON.” 1 Press AMP MEN...
Page 28 - Using the AMP menu; Advanced Settings; AMP MENU
28 GB Using the AMP menu You can set the following items with AMP MENU on the remote.The default settings are underlined. * See ““BRAVIA” Sync Features” (page 24). ** This setting appears only when “CTRL HDMI” is set to “ON.” 1 Press AMP MENU to turn on the AMP menu. 2 Press C / X / x / c repeatedly...
Page 29 - You can adjust the bass and treble level easily.
29 GB A d v a n ced Settin g s • These settings are retained even if you disconnect the AC power cord (mains lead). The following pages show details for each setting. Setting the speaker level (CNT LEVEL, SW LEVEL) You can adjust the level and the balance of the speaker and subwoofer. 1 Select “LEVE...
Page 30 - • ON: Turns on the “NIGHT MODE”; • AUTO: Preferentially output the sound
30 GB Enjoying multiplex broadcast sound (DUAL MONO) You can enjoy multiplex broadcast sound when the stand receives an AC-3 multiplex broadcast signal. • To receive an AC-3 signal, you need to connect a digital satellite tuner to the stand with an optical cable or coaxial cable, and set the digital...
Page 31 - seconds when you operate the stand.; • ON: Turns on the “AUTO STBY”; OFF
31 GB A d v a n ced Settin g s Changing the display setting (DISPLAY) You can change the display behavior of the front panel display. 1 Select “SYSTEM” in the AMP menu, then press or c . 2 Select “ DISPLAY,” then press or c . 3 Select the setting. • ON: The display stays turned on.• OFF: The display...
Page 32 - Additional Information; Troubleshooting
32 GB If you experience any of the following difficulties while using the stand, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. POWER The power is not turned on. • Check that the AC power cord (mains ...
Page 33 - IMAGE; The remote does not function
33 GB Addition al In fo rm atio n No sound or only a very low-level sound of the connected component is heard from the stand. • Press VOLUME + and check the volume level. • Press MUTING or VOLUME + to cancel the muting function. • Check that the input source is correctly selected. • Check that all t...
Page 34 - Specifications
34 GB • If you connect the audio output of the video component and the stand using other than an HDMI cable, no sound may be output because of “BRAVIA” Sync. In this case, set “CTRL HDMI” to “OFF” (page 25) or connect the audio output jack directly to the TV instead of the stand. If “PROTECTOR” and ...
Page 35 - Amplifier section; Center speaker unit
35 GB Addition al In fo rm atio n Formats supported by this stand Digital input formats supported by this stand are as follows. * Linear PCM accepts sampling frequencies of no more than 48 kHz. Amplifier section Rated Output PowerStereo mode 75 W + 75 W, 4 ohms, 1 kHz, THD less than 1 % Reference Ou...
Page 36 - General
36 GB General Power requirements 220 – 240 V, 50/60 Hz Power consumption On: 100 WActive Standby (Power consumption increases when the HDMI function is activated and the TV connected to the stand is turned on, even if the stand is turned off.): 3.5 W or lessStandby: 0.3 W or less Dimensions (approx....
Page 37 - Index
37 GB Addition al In fo rm atio n A A/V SYNC 29 AMP menu 28 AUDIO DRC 29 AUTO STBY 31 B BASS 29 “BRAVIA” Sync 24 C CNT LEVEL 29 Connecting Blu-ray Disc player 10 cable television tuner 12 DIGITAL MEDIA PORT adapter 13 DVD player 10 , 13 FM wire antenna (aerial) 13 PlayStation 2 13 PlayStation 3 10 s...
