Sonance C2015Q - Manual
Sonance C2015Q – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Sonafill; Wire resistance in Ohms vs. length of cable run; Distance in Feet; The Sonafill System; Back box volume requirements:; Retrofit; The C201SQ speaker feature an integral RotoLock
- Page 3 – Note: Do not apply pressure to the tweeter dome.; Here are some suggestions:; INSTALLING THE SPEAKERS; Pivoting tweeter; Make sure the RotoLock
- Page 4 – TECHNICAL ASSISTANCE AND SERVICE; EXCLUSIONS AND LIMITATIONS
When using the C201SQ speakers as a rear channel speaker, the
speakers should be located from 2 to 6 feet behind the main listening
position. The speakers should be separated approximately 6 to 10 feet
apart.
FlexBracket -
part number 91942
Plastic template to reserve hole in new construction.
Designed to be used with the RotoLock
®
mounting system.
Fire-Rated Back Can
- part number 91933
A metal can designed for the C201SQ speaker that meets
the following fire testing criteria;
ASTM E119, CAN/ULC S101, NFPA 251, UBC 7-1, UL 263.
I N S T A L L A T I O N I N S T R U C T I O N S
S
O
N
A
N
C
E
C
2
0
1
S
Q
I N - C E I L I N G S P E A K E R S
INTRODUCTION
Thank you for purchasing the Sonance C201SQ in-ceiling speaker.
When properly installed, this product will provide you with years of
entertainment pleasure.
To obtain the full potential of your new speakers, please read all
instructions before starting the installation. If you do not have the
necessary skills to install the speakers yourself, contact your
authorized Sonance dealer for installation options.
PARTS LIST: C201SQ
Each C201SQ speaker package includes the following items:
(2) Sonance C201SQ speakers
(2) Paintable grilles
(2) Plastic paint plugs to protect speakers during painting
(1) Mounting cutout template ( in packaging )
1
DISTRIBUTED AUDIO PLACEMENT
HOME THEATER PLACEMENT
OPTIONAL ACCESSORIES
The Sonance C201SQ speaker posses extremely smooth and
predictable off-axis frequency response. The chart below shows how
far apart the speakers can be placed in a distributed audio system. The
calculations are based on +/- 45 degrees of coverage from the
speaker, and listener ear heights of 62" for standing and 40" for
seated.
Distributed Audio Placement
2 - CHANNEL AUDIO PLACEMENT
In a standard two channel audio system, the C201SQ speakers should
be separated approximately 6 to 10 feet apart. If possible, the left and
right speakers should be located the same distance from the listening
position.
Speaker spacing in feet for a distributed audio system
Standing Listener
Seated Listener
10 foot ceiling
12 foot ceiling
14 foot ceiling
8 foot ceiling
9.5'
13.5'
17.5'
21.5'
5.7'
9.7'
13.7'
17.7'
6 to 1
0
feet
TV
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 WIRE GAUGE AND QUALITY PREPARING THE INSTALLATION LOCATION Sonafill ® Insulating the ceiling cavity The total wire resistance should be less than 10% of the speakerimpedance. If using an 8 ohm speaker, your total wire resistanceshould be no more than 0.8 ohms. In simple terms, the extra resistance...
The pivoting tweeter can direct sound toward or away from thelistening area. To pivot the tweeter on the C201SQ, apply lightpressure to the plastic ring around outside edge of the tweeter. If youhave any questions about how the pivoting tweeter should beadjusted, consult your authorized Sonance deal...
Woofer 6-1/2" (165mm) Black poly cone with a rubber surround Tweeter 3/4" (19mm) Cloth dome pivoting Frequency Response 60Hz to 20kHz +/- 3dB Efficiency 88dB 1w 1m Power 5 watts minimum to 100 watts maximum Impedance 8 ohms nominal 6 ohms minimum Grille Aluminum Speaker Dimensions 8-5/8"...
