SoleusAir PE4-11R-03- User Manual

Page 3 - SPECIFICATIONS; DISCLAIMER; PACKAGE CONTENTS

3 SPECIFICATIONS • The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F. • Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode. • Power consumption is measured when the fan runs at the highest speed setting. •...

Page 4 - PRODUCT DIAGRAM; FRONT

Page 5 - INSTALLATION; SELECTING THE LOCATION; MOUNTING THE EXHAUST HOSE

5 INSTALLATION SELECTING THE LOCATION Place the unit on a flat surface in an area where the outlets are not obstructed. Place the unit at least 20” away from all adjacent walls. MOUNTING THE EXHAUST HOSE Slide the square front end of the exhaust duct over the hot air outlet on the back of the unit. ...

Page 6 - LCDI POWER CORD AND PLUG; The TEST and RESET buttons should not be used as

6 LCDI POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the load side and a LCDI attachme...

Page 7 - WINDOW KIT INSTALLATION

Page 9 - CONTROL PANEL BUTTONS (Refer to the images on page 9)

9 OPERATING INSTRUCTIONS CONTROL PANEL BUTTONS (Refer to the images on page 9) 1) Power On and Off - Press the ON/OFF button once to manually turn the unit on. Press the ON/OFF button once more to turn the unit off. 2) Mode Selection - Press the MODE Button repeatedly to cycle between the different ...

Page 11 - Auto Mode; button on the control panel.; MODE; by pressing the; FAN; During AUTO mode, the unit operates in; Dehumidifier; mode when the room temperature is between; Air Conditioner; mode when the room temperature is above 80; Emergency Condensate Holding Tank

11 Auto Mode 1) Install the exhaust hoses and window kit properly (see pages 7 & 8). 2) Plug the Power Cord into an electrical outlet. 3) Turn on the unit by pressing the ON/OFF button on the control panel. 4) Press the MODE button until the “AUTO” icon appears on the control panel display. Sele...

Page 12 - OPERATING THE UNIT USING THE REMOTE CONTROL; : Heat mode can be selected using the re-

12 REMOTE CONTROL TIMER SET BUTTONS ON/OFF BUTTON TEMP SET BUTTONS SLEEP MODE MODE BUTTON FAN SPEED LCD Display - shows all settings OPERATING THE UNIT USING THE REMOTE CONTROL REMOTE CONTROL OPERATING INSTRUCTIONS 1) Power On and Off - Press the I/O button on the remote to turn the unit on or off. ...

Page 14 - Cleaning the air filter; tioner; NOTE

14 CARE & MAINTENANCE Prior to all cleaning and maintenance, please unplug the air conditioner from the outlet. Cleaning the air filter 1. Press down on the two latches (hooks) on top of the filter and remove the air intake grill from the air condi- tioner 2. Remove the filter from the air intak...

Page 15 - TROUBLESHOOTING; Problem Possible

15 TROUBLESHOOTING Problem Possible Cause Solution The Air Conditioner Does Not Start • The Power Supply is not Connected to an outlet • The Power plug is not inserted tightly to an outlet • There is a malfunction with the power plug or electrical outlet and/or fuse. • Insert the power plug tightly ...

Page 16 - WARRANTY; THIS WARRANTY DOES NOT COVER:; Freight and Insurance cost for the warranty service.; For Technical Support and Warranty Service

16 WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air PE4-11R-03 Portable Air Conditioner to be free of de-fects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of origin...

SoleusAir PE4-11R-03- User Manual

Table of Contents:

Other Manuals for SoleusAir PE4-11R-03

Summary

Other SoleusAir Models