SoleusAir HC1-15-12- Manual
SoleusAir HC1-15-12– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – PRODUCT DIAGRAM; Power Select Dial
- Page 5 – POWER SELECT; this switch is turned to the desired setting, the red; POWER INDICATION LIGHT; will; Polarized Plug; PLEASE DO NOT TAPE OR GLUE THIS SWITCH.; SAFETY FEATURES
- Page 6 – MAINTENANCE; ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING.; A thermal overload protector is built in to prevent overheating.; RESET INSTRUCTION; STORAGE; desired temperature setting.
- Page 7 – WARRANTY; THIS WARRANTY DOES NOT COVER:; For Technical Support and Warranty Service
HC1-15-12
© 2010 Soleus Air International
HC1-15-12
Ceramic Heater
Operating Instructions
3077997
Meijer.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for SoleusAir HC1-15-12
Summary
PRODUCT DIAGRAM Power Select Dial Power Indicator Light Tip Over Safety Switch (underneath the heater) 4 Meijer.com
OPERATING INSTRUCTIONS Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate the heater when it is in the upright position. Use the instructions below to operate the heater using the control dial. 1. Turn on the POWER SELECT dial to the desired power...
MAINTENANCE WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING. CLEANING: IMPORTANT! DO NOT IMMERSE HEATER IN WATER! Clean the heater grills using the vacuum brush attachment on your vacuum cleaner. This will remove lint and dirt from the inside of the heater. DO NOT ATTEMPT TO TAKE HEATER A...
