Snooker SK-700P - User Manual
Snooker SK-700P Ice Maker – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
PRODUCT MODEL NUMBER
SK-700P
Full cube size
7/8”x7/8”x7/8”
Refrigerant R404A
ELECTRI CA L
A
220 Volt
,
60 Hz.
,
AC
only, electrical supply, properly grounded in accordance with the National Electrical Code and
local codes and ordinances, is required.
Use a separate circuit, serving only your ice maker.
WATER
A cold water supply with water pressure between
0.13 Mpa
[
19
PSI
] and
0.55 Mpa
[
80
PSI
] is required to operate ice
maker. If you have questions about your water pressure, call a licensed,
qualifie
d plumber.
LO CA TI O N
To ensure proper ventilation for your ice maker, the front side must be completely unobstructed. The ice maker may be
closed-in on the top and two sides with proper spacing left for ventilation. The installation should allow the ice maker
to be pulled forward for servicing if necessary.
Installation of the ice maker requires a cold water supply inlet of
3⁄8"
(
6.35 mm
) OD soft copper tubing with a shutoff
valve or drain pump, only to carry the water to an existing drain.
Choose a well ventilated area with temperatures above
55°F
(
13°C
) and below
110°F
(
43°C
). Best results are
obtained between
70°F
and
90°F
(
21°C
and
32°C
).
ICE MAKER
UNIT DIMENSIONS
23
30
E
Dimensions
(WDH)
30x33x66
Output
700lb /317kg
W
C
Ice Shape
Full Dice
23
Bin size
350 lb
Voltage
220(V)
Watts
1500(W)
D
O
Condenser
unit
Air
Refrigerant
R404A
Net weight
of head
Net weight
of bin
Gross weight
46
of head
Gross weight
of bin
Carton dimensions
of head
Carton dimensions
of Bin
145lb
100lb
155lb
110lb
34x28x25
36x34x42
32
22
MODULAR ICE MAKER
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
