Snapper 280922B - Manual

14 SMOOTH CLUTCH ASSEMBLY MANUAL No. 06128 R. E. RIDER SERIES 22 21 14 13 12 11 10 9 8 7 6 5 4 3 2 1 21 20 19 18 18 17 17 16 16 15 30 29 29 28 27 26 25 24 23 22 34 33 32 31 See page 6, Item 40

16 11 10 12 15 21 13 42 41 31 21 33 RAILS & LIFT ARMSASSEMBLY (SeePages 18 and 19) 16 24 40 2(30” Deck) 39 8 35 17 4 5 3 9 44 19 36 20 SILHOUETTE OFSPINDLE ASS’Y.(See Page 21 ForParts Breakdown) 43 46 SILHOUETTE OFBLADE, ITEM 46 NOTE: Blade part number appears On blade. 18 20 19 7 6 9 17 35 31 2...

20 BLADE STOP PEDALS ITEM PART NO. DESCRIPTION 1 7-3267 PEDAL, Blade Stop Control 2 3-5669 SPRING, Latching 3 1-5448 SPRING, Pedal 4 1-5495 BOLT, 3/8-24 Shoulder, Grade 5 5 1-5446 BOLT, 3/8-24 x 9/16" Shoulder 6 1-2063 W ASHER, Cone 13/32” I. D. 7 9-0155 NUT, 3/8-24 Hex, Grade B 8 9-0250 W ASHER...

21 SPINDLE ITEM PART NO. DESCRIPTION 1 5-4531 ASSEMBLY, Spindle Housing (Includes Items 2 Thru 13) 2 1-2491 RING, 1.85” Internal Retaining (2) 3 1-3313 BEARING, Spindle (2) 4 4-0460 W ELDMENT, Spindle Housing 5 1-0817 FITTING, Lube (for 3/16” diameter hole) 6 4-4785 SPINDLE, Rider (10.327” overall l...

24 DRIVE DISC ASSEMBLY ITEM PART NO. DESCRIPTION 1 7-4187 W ELDMENT, 5.25” O.D. Drive Disc (33" Models) - 7-2658 W ELDMENT, 5.75” O.D. Drive Disc (28”, 30” & 42” Models) 2 9-0132 SCREW , 3/8-16 x 3/8” Set (2) 3 1-0210 KEY, 1/4” Square x 2” MANUAL No. 06128 R. E. RIDER SERIES 22 3 2 1

25 FUEL TANK & OPERATORS SEAT ITEM PART NO. DESCRIPTION 1 2-8595 SEAT, Operator (12, 14.5 & 15HP Models) (shown) -- 2-8650 SEAT, Operator (9 & 10HP Models) (not shown) 2 5-1905 ASSEMBLY, Fuel Tank (9 & 10HP Models) (Includes Item 3) -- 5-2435 ASSEMBY, Fuel Tank with Gauge (12, 14.5 &...

26 ENGINES & EXHAUST MUFFLER 9.0 RECOIL BRIGGS & STRATTON 28B702 1154-E1 14.5 ELECTRIC BRIGGS & STRATTON C.A.R.B. 287707 1235-E1 15.0 ELECTRIC KOHLER CV15ST PS-41580 ITEM PART NO. DESCRIPTION 1 5-1996 MUFFLER (B&S 9-12 HP) (Includes items 8 & 9) 2 9-0206 SCREW , 5/16-18 x 3/4”Hex...

27 THROTTLE CONTROL ITEM PART NO. DESCRIPTION 1 2-2751 CONTROL, Throttle (23.6” long) (Briggs Engines) -- 7-4320 CONTROL, Throttle (34.6” long) (Kohler Engine) 2 9-0539 SCREW , 1/4-20 x 1/2” Hex W asher Self-Tap (2) 3 3-3470 PLATE, Throttle Control 4 9-0913 SCREW , #10-24 x 1/2” Hex W asher Self-Tap...

28 DECALS ITEM PART NO. DESCRIPTION 1 2-3996 DECAL, 28 Inch 2 2-3997 DECAL, 30 Inch 3 2-2991 DECAL, 33 Inch 4 7-1916 DECAL, Snapper 5 7-4481 DECAL, No Mow in Reverse 6 2-6831 DECAL, Danger (CPSC) 7 4-6218 DECAL, Height Cut 8 2-3980 DECAL, Back-up Recoil 9 2-3982 DECAL, OHV 10 2-9470 DECAL, Patent Nu...

31 ELECTRICAL SYSTEMS (For 9HP Briggs Recoil Start) ITEM PART NO. DESCRIPTION 1 2-8606INTERLOCK, Module 2 2-8386HARNESS, Deck Interlock 3 1-8524SW ITCH, Deck Interlock (NO) 4 9-0880W ASHER, 5/8 Internal Tooth Lock 5 1-5438NUT, 5/8-32 Hex 6 1-1138KEY, Switch (2) 7 7-3714HARNESS, Ground (Recoil Start)...

35 ELECTRICAL SYSTEMS (For 14.5 HP BRIGGS) ITEM PART NO. DESCRIPTION 1 6-0753 KIT, 12V Dry Charge Battery 2 1-8817 SOLENOID 3 2-2788 HARNESS, Starter W iring (Briggs) 4 7-4406 HARNESS, Ignition W iring (Briggs) 5 1-6168 HOLDER, Fuse (Includes Fuse) -- 1-6169 FUSE (10 AMP) 6 2-8606 INTERLOCK Module (...

38 WIRING SCHEMATICS MANUAL No. 06128 R. E. RIDER SERIES 22

42 HARDWARE BAGS ITEM PART NO. DESCRIPTION LOCATION -- 6-1872 HARDW ARE BAG (includes items listed below) 1 1-1024 PLUG, Oil Fill & Check (2) ................................................ page 11, item 18 & page 13, item 14 2 1-3321 BUSHING, Tie Rod (2) ......................................

44 Parts Manual for REAR ENGINE RIDERSERIES 22 SNAPPER REAR ENGINE RIDER ACCESSORIES* PART NO. DESCRIPTION OF KIT MODELS USED ON 6-0517 ............................. W heel W eight (8” W heels) ................................... All Rear Engine Riders 6-0601 ............................. Smooth Sta...