Smeg SMF02PKAU - User Manual

Instructions 7 ITENEN 1.5 Manufacturer liability The manufacturer shall not be held responsible for personal injuries or property damage caused by:• Any use of the appliance other than the one it was designed for • Not having read the user manual• Tampering with any part of the appliance • Use of no...

Description 8 2 Description 2.1 Product description Model SMF02 - SMF03 - SMF13 - Stand Mixer 1 Motor head 2 Body 3 Power and speed selector 4 Head raising/lowering release button 5 Lower attachment for standard accessories 6 Front attachment hub for optional accessories 7 Front hub cover 8 Bowl bas...

Description 10 2.3 Standard accessories Aluminium dough hook For slowly combining, mixing and kneading leavened dough type mixtures including bread, pasta, pizza, etc. Aluminium flat beater For combining, mixing, and starting all mixing procedures. For preparing cake batters and pastries, biscuits, ...

Use 12 3 Use 3.1 Before first use 1. Remove any protective films or other packaging from the outside or inside of the appliance, including standard accessories. 2. Remove any labels (apart from the technical data plate) from the appliance, its components and standard accessories. 3. Remove and wash ...

Use 13 ITENEN 4. Insert the bowl ( 3 ) in its base ( 4 ). Grasp the bowl by its handle ( 5 ) and turn the bowl ( 3 ) clockwise until it locks into place. 5. Select the accessory required based on the type of mixing to be performed. 6. Insert the accessory ( 6 ) in the lower attachment ( 7 ) and push...

Use 15 ITENEN When you have finished using the mixer: 1. Position the speed selector ( 10 ) on ‘0’ (OFF) and remove the plug from the socket. 2. Remove the pouring shield, if it is on the bowl ( 9 ). 3. Press the release button ( 1 ) to raise the head ( 2 ). Moving parts Danger of personal injury an...

Use 16 4. Push the accessory ( 6 ) upwards slightly and turn it clockwise to unlock it from the pin ( 8 ). Extract the accessory ( 6 ) from the lower attachment ( 7 ). 5. Remove the bowl ( 3 ) from its base ( 4 ) by turning it anticlockwise to release it. 6 7 6 8 3 4 B A

Use 17 ITENEN 3.3 Using the pouring shield 1. Fit the pouring shield ( 1 ) to the upper lip of the stainless steel bowl* after inserting the bowl in its base and the accessory in the lower attachment and lowering the head into the operating position. 2. Fit the pouring shield with the opening ( 1 ) ...

Use 18 3.4 Functions Safety lock system The appliance has a safety system which automatically shuts off the appliance when the motor head is raised. Smooth Start Function The Smooth Start function starts the appliance up with a reduced initial speed, regardless of the speed set with the selector.The...

Use 19 ITENEN 3.5 Speed setting suggestions The speed selector shows the most appropriate accessory to use with the selected speed.The speeds indicated in the table are approximate and can vary depending on the recipe and the interaction of the different ingredients used. Speed setting Function Acce...

Use 20 Table of recommended accessory, recommended speeds and maximum capacities (1) Average egg size: 53-63 g Accessory Preparation Speed Time Min/max capacity Egg whites 8 -10 2-3 min 2 - 12 (1) Cream 8-10 2-3 min 100 ml/1000 ml or Prepared cake batters 1 - 7 3-4 min 2 kg total batter Pastry 1 - 7...

Use 21 ITENEN General advice • Never exceed the maximum speed and capacity indicated in the table in order to prevent damage to the appliance. • Turn on the appliance at a low speed until all the ingredients are mixed, then increase the speed on the basis of the required operation. • When adding ing...

Cleaning and care 23 ITENEN 4 Cleaning and care 4.1 Instructions 4.2 Ordinary daily cleaning To keep the surfaces of the appliance in good condition, clean them with a damp cloth after use.Wipe over thoroughly and dry with a soft cloth or microfibre cloth. The pouring shield* and the wire whisk can ...

Cleaning and care 24 4.3 What to do if... Problem Possible cause Solution The motor will not start The motor has overheated. Disconnect the mixer from the power and leave the motor to cool. The plug is not properly inserted in the power socket. Insert the plug into the power socket. Do not use adapt...

Cleaning and care 25 ITENEN The mixer vibrates The mixer is not resting on a stable surface. Place the mixer on a flat, stable surface. The anti-slip rubber feet are worn. Have them replaced at an Authorised Service Centre. The speed has been set too high or the load is excessive. Set a lower speed ...

Cleaning and care 26 ITENEN The accessory is struggling to turn inside the bowl The dough mixture is too thick and is stopping the accessory from turning. Add water or other liquid to loosen the dough mixture. The bowl is too full. Remove half the bowl’s contents and work it separately. Problem Poss...