Skylink TD-434 - Manual - manualsarea.com

Page 2 - cONTENT

1 cONTENT INTRODUCTION................................................................................................... POWER UP ......................................................................................................... SET THE CLOCK ....................................................

Page 3 - INTrOducTION; Lcd deluxe remote Layout

2 INTrOducTION SkylinkHome TM LCD Deluxe Remote allows you to wirelessly operate SkylinkHome TM various wireless receiver controls. This LCD Deluxe Remote provides features such as: - Zone Operation - Scene Operation - Timer Operation You can control various home appliances or lights with this remot...

Page 4 - POwEr uP; “Battery” of this manual for details.; SET ThE cLOck; is in 24 hours format.

3 POwEr uP Insert 2 AAA batteries to the remote (with the correct polarity as shown), its LCD display will turn on and red LED will flash once. Press the button on the remote, the red LED should flash. The remote is now powered properly. If the LCD display does not turn on or red LED does not flash ...

Page 5 - You may assign the buttons to specific lights and zones.

4 PrOgrammINg ThE Lcd dELuxE rEmOTE TO rEcEIvEr cONTrOL In order to operate the receiver control with this LCD Deluxe Remote, it must be programmed to the receiver control. The LCD Deluxe Remote can transmit 4 types of command: 1) Individual Operation – Control one light only, i.e. the ceiling light...

Page 6 - PrOgrammINg fOr INdIvIduaL OPEraTION; to the receiver control.

5 PrOgrammINg fOr INdIvIduaL OPEraTION Individual operation allows you to use one of the buttons from 1 to 9 to control one specific light or appliance. To program a remote to the receiver control, a “Learn” code must be transmitted, follow the instructions below to transmit the “Learn” code to the ...

Page 7 - PrOgrammINg fOr ZONE OPEraTION

6 1. Put the receiver control that you plan to program into programming mode. Refer to the User’s Instructions of that receiver control. 2. During the standby mode, the LCD display will show the current time. Press the [PROG] button once to enter the Individual Programming mode. The Signal icon [ ] ...

Page 8 - PrOgrammINg fOr ScENE OPEraTION; disappear indicating the “Learn” code is sent.

7 PrOgrammINg fOr ScENE OPEraTION Scene can provide specific brightness of multiple lights with a press of a button, this can create specific atmosphere. The remote provides 9 different scene settings, brightness of light control from 0% [off] to 100% [brightest], i.e. common scenes are morning scen...

Page 9 - Scene 1 with the brightness setting flashing.; To turn on a scene

8 4. Now the Red LED stays on and the SCENE icon, Signal icon and Settings icon stay on for 15 seconds to allow you to program this scene to the receiver control. 5. Put the receiver control that you plan to program into programming mode. Refer to the User’s Instructions of that receiver control. 6....

Page 10 - PrOgrammINg fOr TImEr OPEraTION; To setup a timer (Time and day or the week)

9 You may assign a scene to specific receivers with preset brightness to create different atmosphere. Some examples below. Scene No. Scene Name Receiver Control Brightness 1 Evening Family Room Floor Light 30% 1 Evening Family Room Ceiling Light 40% 1 Evening Kitchen Floor Light 30% 2 Movie Kitchen ...

Page 13 - To activate or deactivate the Timer:; BaTTErY; does not flash during operation, it is time to replace the battery.; cE

12 To activate or deactivate the Timer: 1. During the standby mode, press [TIMER] once [show LCD]. 2. Press [1 – 9] to select the desired timer, i.e. Enter [1] for Timer 1. 3. Press [TIMER] again to activate or deactivate the timer. If the Timer icon stays on, the timer is activated. If the Timer ic...

Page 14 - If you would like to; cuSTOmEr SErvIcE

13 warraNTY If, within one year from date of purchase, this product should become defective (except battery), due to faulty workmanship or materials, it will be repaired or replaced, without charge. Proof of purchase and a Return Authorization are required. cuSTOmEr SErvIcE If you would like to - fi...

Skylink TD-434 - Manual

Table of Contents:

Summary

Other Skylink Models