Skylink SK-250 - User Manual

Alarm System Starter Kit

Model: SK-250

iPhone not included

Protect your Home the Smart Way!

User Manual

P/N: 101Y269-001 ©2017 SKYLINK GROUP.

1. Package Contents

1x Internet Hub

2x Motion

Sensors

2x Door/Window

Sensors

1x Keychain

Remote

Mounting

Accessories

2x Power

Adapters

1x Indoor Wireless

Pan & Tilt Camera

1x Ethernet

Cable

NOTE: 6 x AAA- and 1 x AA-Batteries required to setup the SkylinkNet Alarm System.

2. Install the Internet Hub

1. Connect your Hub to an available Port on your Internet Router using the Ethernet cable.

2. Plug in the Power Adapter.

3. Insert 4 x AAA-Batteries in the Hub for backup power in case of power outage. (Optional)

3. Insert Batteries for Sensors

1. Slightly push both sides of the Door/Window Sensor and pull out the cover to insert an AAA-Battery.

2. Use a coin to open the Motion Sensor and insert an AA-Battery.

4. Download the SkylinkNet App

1. Tap on App Store

2. Tap on Search Icon and

search for “SkylinkNet.”

3. Tap on Free Button

to download the App.

4. When download is completed,

it will show on your HomeScreen.

NOTE: Only the “SkylinkNet” App will work with

the Internet Hub.

5. Create a SkylinkNet Account

1. Open the SkylinkNet App

and tap on “Create Account.”

2. Enter your information

and tap on “Sign Up.”

3. Check your email to activate

your account and tap on

“Continue” to log in.

4. Click on the link from the email to activate your account.

5. Now you are ready to

login to your account.

6. Set up the Internet Hub

1. Tap on “Set up Hub.”

2. Tap on “Initialize a

new Hub.”

3. Follow the instruction on

screen to connect the

Internet Hub.

5. Follow the instruction on

screen to reset the Internet

Hub and tap “Continue.”

4. Enter your information

and tap on “Continue.”

6. Hub is added and you will see

a green or red dot indicating if

it’s connected to the Hub.

7. Add Sensors and Keychain Remote

1. Go to “More” and tap

on “System Settings.”

2. Tap on “Setup Wizard.”

4. Tap on “Sensors” or

“Security Remote.”

3. Tap on “Add Device.”

5. Select the type of

sensor you want to add.

6. Name your sensor and

location and tap “Continue.”

7. Tap the “Learn Now”

button and follow the video

to activate the sensor.

(If you select Security Remote, skip to Step 6)

8. Now trigger the sensors

to test if the SkylinkNet App

is showing the sensor status

correctly.

NOTE:

If motion is detected, a red

LED light inside the sensor will flash.

Sensor will not be triggered by new

motion unless no motion has been

detached for 15 seconds.