Skylink AD-433S - Manual - manualsarea.com

Page 2 - English; Emergency Dialer

AD-433S USER'S INSTRUCTIONS English DIAL-ALERT Emergency Dialer TM SKYLINK TECHNOLOGIES INC. Your Guide to the Emergency Dialer DIAL-ALERT MODEL: AD-433S TM 9 V O LT The AD-433S Emergency Dialer contains all the above items. – 2 –

Page 3 - TABLE OF CONTENTS; Pack of screws and anchors (for; PACKAGE CONTENTS

TABLE OF CONTENTS PACKAGE CONTENTS............................................................................................4 . . . OVERVIEW.........................................................................................................5 INSTALLATION..........................................

Page 4 - OVERVIEW; Automatically call for help when emergency; INSTALLATION; How to use the template:

– 5 – OVERVIEW The AD-433S Dial-Alert dials as many as 9 pre-programmed telephone numbers and sends a personalized pre-recorded message. Each telephone numbercan be dialed up to 9 times and the person receiving the emergency messagecan confirm receipt of that message by pressing the "#" key ...

Page 5 - The adapter cord must be inserted; Switch Setting

– 7 – INSTALLATION 3. Thread the AC adapter cord through the top hole in the back of the unit and plug it intothe AC connector on the circuit board asshown. The adapter cord must be inserted through the back of the unit before it isattached to the wall. 4. Insert the 9 volt battery and rotate the an...

Page 6 - LIGHTS AND SOUNDS; LIGHTS; STANDARD PROGRAMMING; PROGRAM THE TIME CLOCK

– 9 – LIGHTS AND SOUNDS Below is an explanation of the lights and sounds of the Dial-Alert LIGHTS ACPWR light on dialer is being powered by AC adapter. ACPWR light off dialer is not receiving any AC power. LOBATT. light off backup battery is connected and working. LOBATT. light on backup battery is ...

Page 7 - STORING TELEPHONE NUMBERS; PLAYBACK PRE-RECORDED MESSAGE; the number of times the message wi

– 11 – STANDARD PROGRAMMING STORING TELEPHONE NUMBERS This feature enables the user to program as many as 9 different telephonenumbers. The dialer can send out 2 different messages. One message is thepre-recorded voice message that you programmed earlier, the other messagesends numeric information t...

Page 8 - C. Storing telephone numbers in memory (Sends the numeric; DELETE A TELEPHONE NUMBER FROM MEMORY

– 13 – STANDARD PROGRAMMING C. Storing telephone numbers in memory (Sends the numeric information to pager only) 1. Press the [MEM] key, the display will show a letter “M” on the upper left corner. If nothing is entered within 5 seconds, the display will return to theclock mode. 2. W ithin the first...

Page 9 - PROGRAM THE CALLING TIME; ADVANCED PROGRAMMING; To insert a pause period in a telephone number

– 15 – ADVANCED PROGRAMMING PROGRAM THE CALLING TIME The calling time is the amount of time the phone will ring until the call is dis-contected. If the phone is not picked up within this period of time, the dialerwill either call again, (depends on the redial count), or advance to the next phonenumb...

Page 10 - PROGRAM THE ID CODE OF A TRANSMITTER; To erase transmitters/sensors/security systems from the dialer:; Exiting a premises using the delay dialing

– 17 – PROGRAM THE ID CODE OF A TRANSMITTER Before any transmitter/sensor/security system can activate the Dial-Alert , they must be learned (programmed) to communicate with each other. Oncethey are learned, the button on the transmitter, a door with the door/windowsensor on it is opened, someone wa...

Page 11 - UNIVERSAL DIAL TONE; Alert; DIAL SEQUENCE SETTING

– 19 – Entering a premises using the delay dialing If entering a premises through a door that is monitored with a door sensor, thedelay dialing is set to 0 seconds and the dialer is on, the dialer will dial thepreprogrammed telephone numbers immediately once that door is opened orany sensor is activ...

Page 13 - To replace the dialer backup battery:; BATTERY MAINTENANCE

– 23 – The AD-433S Dial-Alert comes with 1 battery that at some point you may have to replace: One 9 volt alkaline battery for the Dial-Alert Recommendation: Test your Dial-Alert periodically to ensure that the battery is working. Dial-Alert Battery The Dial-Alert comes equipped with a 9V backup bat...

Page 14 - ADDITIONAL ACCESSORIES

– 25 – ADDITIONAL ACCESSORIES Silent Alarm (SW-433) - Plug into any AC outlet, then plug light into Silent Alarm unit- Light flashes when sensor(s)/transmitter(s) is (are) activated- Silently alerts occupants including the hearing impaired Vibration Sensor (VS-433) - Activates Security Control Panel...

Skylink AD-433S - Manual

Table of Contents:

Summary

Other Skylink Models