Page 2 - Table of Contents
2 Table of Contents Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features . . . . . . . . . . . . . . . . . . . . . . . ...
Page 3 - Compatibility
3 Compatibility This Vehicle Kit is compatible with the following Dock & Play Radios:SiriusXM: • Onyx Plus • Edge XM: • Onyx • Onyx EZ • XpressRCi • XpressRC • XpressR Sirius: • Sportster 5 • Starmate 8, 5, 4, 3 • Stratus 7, 6, 5 • Stratus
Page 4 - Introduction; Features; Thank you for purchasing the SiriusXM Dock & Play; Connect; compatible SiriusXM Dock & Play Radio in another vehicle .
4 Introduction Features Thank you for purchasing the SiriusXM Dock & Play Power Connect Additional Vehicle Kit! Your new Additional Vehicle Kit has everything you need to use your compatible SiriusXM Dock & Play Radio in another vehicle . • Add Satellite Radio to an additional vehicle: No ne...
Page 5 - Safety and Care Information
5 Safety and Care Information IMPORTANT! Self installation instructions and tips are provided for your convenience . It is your responsibility to determine if you have the knowledge, skills, and physical ability required to properly perform an installation . SiriusXM shall have no liability for dama...
Page 8 - Connect Vehicle Dock; Color-Coded Connections
8 Introduction Power Connect Vehicle Dock Color-Coded Connections The color-coded Power Connect Vehicle Dock makes it simple to connect . Just match the colors on the cable ends to the colors on the dock to see what goes where . Side View Right Left AUDIO ANT PWR FM AUDIO (Green) Connection for Aux ...
Page 9 - The
9 Rear View Wire Guide The Power Connect Vehicle Dock has a channel across the back to help organize the wires connected to the dock . If you need to bring a wire from one side of the dock to the other side, utilize the wire guide channel to keep the wires tidy . Wire Guide Channel Introduction
Page 10 - Vehicle Installation; Step 1: Insert the Radio Dock Adapter Into the Dock; If you have an XM or SiriusXM Radio
10 Vehicle Installation Step 1: Insert the Radio Dock Adapter Into the Dock You’ll need to insert the Radio Dock Adapter that is compatible with your Radio into the Vehicle Dock . 1. Locate the Radio Dock Adapter that is compatible with your Radio . If you have an XM or SiriusXM Radio : If your Radi...
Page 12 - Then lift the adapter up and out of the dock .
12 Vehicle Installation Should it become necessary to remove the Radio Dock Adapter from the Vehicle Dock, use your fingernail to gently press down on the top of the adapter, and then use a long thin object such as a paper clip, a screw driver, or something similar to pry the adapter away until it r...
Page 13 - Step 2: Choose a Location for Your Radio
13 WARNING! DO NOT attempt to install this Vehicle Kit while driving . Park your vehicle in a safe location before beginning installation . Step 2: Choose a Location for Your Radio When installing the Power Connect Vehicle Dock in your vehicle, choose a location where it will not block your vision, ...
Page 16 - Step 3: Install the Dash or Vent Mount; Installing the Dash Mount:; room for the
16 Step 3: Install the Dash or Vent Mount Follow the instructions on the next several pages for the mounting method you have selected . NOTE! The Power Connect Vehicle Dock included with the this Vehicle Kit is compatible with the T-slot style Dash and Vent Mounts . If you have an existing Dash Moun...
Page 18 - Installing the Vent Mount:
18 Installing the Vent Mount: IMPORTANT! To make the cable connections easier, wait until after you have connected all the cables to the dock before you attach the Vent Mount to a vent . 1. Locate a vent with horizontal louvers sturdy enough to hold your Power Connect Vehicle Dock and Onyx Plus Radi...
Page 20 - Step 4: Mount the Magnetic Mount Antenna; To install the Magnetic Mount Antenna:
20 Step 4: Mount the Magnetic Mount Antenna Mount the Magnetic Mount Antenna on the outside of your vehicle, on a horizontal surface that will always face the sky . The antenna contains a strong magnet which will stick to any metal part of your vehicle, but will not damage the vehicle . To install t...
Page 22 - Place the antenna in the location you selected . Follow the Tips and
22 TIP! Mount the antenna on the roof (for most vehicles) or trunk (for convertibles) where it has a clear view of the sky in all directions . 3. Place the antenna in the location you selected . Follow the Tips and Cautions shown on the next several pages . Vehicle Installation
Page 25 - Step 5: Route the Magnetic Mount Antenna Cable
25 Step 5: Route the Magnetic Mount Antenna Cable Before you begin routing the antenna cable, read these general instructions for how to route and hide the antenna cable . Then route your antenna cable according to the instructions which follow for your specific type of vehicle . Feed cable under ru...
Page 30 - Sedan/Coupe With the Antenna Placed at the Rear of the Roof:
30 Sedan/Coupe With the Antenna Placed at the Rear of the Roof: 1. Feed the antenna cable from the antenna underneath the rubber molding around the rear window . Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the rear window and tuck the antenna cable underne...
Page 32 - Sedan/Coupe With the Antenna Placed at the Front of the Roof:
32 Sedan/Coupe With the Antenna Placed at the Front of the Roof: 1. Feed the antenna cable from the antenna underneath the rubber molding around the windshield . Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the windshield and tuck the antenna cable undernea...
Page 36 - Step 6: Connect the Magnetic Mount Antenna and; Connect Power Adapter; silver; red
36 Step 6: Connect the Magnetic Mount Antenna and Power Connect Power Adapter 1. Plug the Magnetic Mount Antenna into the silver ANT connector at the side of the Power Connect Vehicle Dock . 2. Insert the Power Connect Power Adapter into your vehicle’s cigarette lighter or power adapter socket . 3. ...
Page 37 - Step 7: Connect the Audio
37 Step 7: Connect the Audio To play audio through your vehicle’s stereo or FM radio, decide on one of the following audio connection options: • Option 1 : Best : Use the provided Aux In Cable if your vehicle’s stereo system has an auxiliary input connection or jack . Refer to your vehicle’s owners ...
Page 38 - Option 1: Aux In Cable Installation Instructions
38 Option 1: Aux In Cable Installation Instructions 1. Plug one end of the Aux In Cable into the green AUDIO connector at the side of the Power Connect Vehicle Dock . 2. Plug the other end into the auxiliary input jack connection of your vehicle’s stereo system . 3. If you are using the vent mountin...
Page 40 - Option 2: Cassette Adapter Installation Instructions; green; Power button
40 Option 2: Cassette Adapter Installation Instructions 1. Plug the Cassette Adapter into the green AUDIO connector at the side of the Power Connect Vehicle Dock . 2. Insert the Cassette Adapter into the vehicle’s cassette deck . You may need to turn on your vehicle’s stereo system in order to do so...
Page 42 - Connect Installation Instructions; fmchannel
42 Option 3: Power Connect Installation Instructions 1. If you are using the vent mounting method, attach the Vent Mount to the vent . 2. Insert your Radio into the dock . NOTE: Your Radio may be a different model than the Radio shown here . 3. Be sure the vehicle is outside and the antenna has a cl...
Page 45 - you bought your Radio, or go to
45 Vehicle Installation Option 4: FM Direct Adapter (FMDA) Installation The FMDA needs to be installed by a professional installer . Professional installation can help improve your Radio’s reception and significantly reduce the visibility of wires . To learn more, check with the retailer where you b...
Page 46 - If you see this on the screen:; Troubleshooting
46 The Vehicle Kit has been designed and built to be trouble-free, but if you experience a problem, try this: • Check that all connections are firm and secure . • Make sure the vehicle power socket is clean and free of corrosion . • Make sure you have connected the Vehicle Dock as described in this ...
Page 50 - Product Specifications
50 Product Specifications System Power Requirements: 9-16 V DC, 500 mA (max) Operating Temperature: -4°F to +140°F (-20°C to +60°C) Audio Output: 1 .0 Vrms (max) Power Connect Vehicle Dock Dimensions: 4 .1 in (width) x 1 .8 in (height) x 1 .1 in (depth) 105 mm (width) x 46 mm (height) x 28 mm (depth...
Page 51 - Patent and Environmental Information; Patent Information; the AMBETM voice compression software included in this product is; Environmental Information; electronic appliances .
51 Patent and Environmental Information Patent Information It is prohibited to, and you agree that you will not, copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise access and/or make available any technology incorporated in this product . Furthermore, the AMBE™ voice comp...
Page 52 - FCC Statement
52 The user is cautioned that changes or modifications not expressly approved by Sirius XM Radio Inc . can void the user’s authority to operate this device . This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: 1 . This device may not cause harmf...
Page 53 - IMPORTANT NOTICE: REQUIRED SUBSCRIPTION; Copyrights and Trademarks
53 ©2014 Sirius XM Radio Inc . “Sirius”, “XM” and all related marks and logos are trademarks of Sirius XM Radio Inc . “BBC” and “Radio One” are trademarks of the British Broadcasting Corporation and are used under license . BBC logo © BBC 1996 . Radio 1 logo © BBC 2001 . Cosmopolitan™ is a registere...
