Sirius Satellite Radio XTR8CK - Manual

4 COMPONENTS GUIDE 4 XACT Sirius Satellite Radio Receiver 1. Power Button/IR for Remote Control 2. Rewind 3. Play/Pause 4. Fast Forward 5. Memo/SIRIUS-Seek 6. Display 7. Select 8. Channel Up and Down 9. Category Left and Right (jump to the nextor previous category) 10. Numerical Keys (presets or dir...

COMPONENTS GUIDE 5 Wireless Remote Control The wireless remote control packed with your plug and play XACT Sirius Satellite Radio mirrors the operationsof your plug and play XACT Sirius Satellite Radio Receiver from a remote location. 1. Power Button 2. Category Left and Right (jump to the nextor pr...

6 GETTING STARTED Mounting Your XACT Sirius Satellite Radio at Home Find an appropriate location near your stereo receiver to install your plug and play XACT Sirius Satellite RadioReceiver. Mounting Your XACT Sirius Satellite Radio in a Vehicle Find an accessible location in your vehicle to install ...

Activating Your Sirius Subscription Before beginning to use your new device, you must first subscribe to Sirius Satellite Radio service. There are two ways to activate the Sirius Satellite Radio Service: 1. Visit www.sirius.com and click activate, then follow the on-screen instructions. 2. Call Siri...

5. Once the channels have been updated, the display will change to "Call 1-888-539-SIRIUS to Subscribe" and will place you in SIRIUS Satellite Radio's Preview Channel, channel 184. Note: You will only be able to tune to channel 000 and 184 until you activate your SIRIUS subscription. 6. Usin...

Mounting to the Dashboard or Console Note: Use only the appropriate XACT accessories or input devices with your receiver. Use only the 12v Vehicle Adapter that is provided with the kit. It is important that you do not modify it in any way as this may result in damage to your equipment and void the w...

1 0 Mounting to the Windshield Note: Use only the appropriate XACT accessories or input devices with your receiver. Use only the 12v Vehicle Adapter that is provided with the kit. It is important that you do not modify it in any way as this may result in damage to your equipment and void the warrant...

1 1 Mounting in your Home Note: Use only the appropriate XACT accessories or input devices with your receiver. Use only the 12v Vehicle Adapter that is provided with the kit. It is important that you do not modify it in any way as this may result in damage to your equipment and void the warranty. 1....

After you have successfully activated your SIRIUS Satellite Radio subscription, and the Receiver has receivedthe subscription information from the SIRIUS signal, the default display screen will be displayed. Tuning to Different Channels Pressing the CHANNEL UP or CHANNEL DOWN button will cause the R...

A momentary press of the DISP button while in the category list mode will cause the Receiver to display the current list of Artist Names. The next momentary press of the DISP button will cause the Receiver to display the current list of Song Titles. Display Options Changing the Display Text Size Mom...

Display List Options Pressing and holding the DISP button for 1½ seconds will cause the Receiver to enter the channel, artist name, or song title list mode. Channel List The channel list mode makes it easy to quickly search for and locate music by channel name. Once the Receiver has entered the chan...

Song Title List The next momentary press of the DISP button will cause the Receiver to display the current list of Song Titles. Note: If you are viewing a sports category channel list (NFL ® , NBA ® , NHL ® , or College), pressing the DISP button will instead toggle between the team names and the cu...

Presets You can store up to 30 of your favorite channels as presets for quick recall access. The preset channels arestored in 3 bands, A, B, and C, each containing 10 channel presets, and are numbered 0 to 9. The 10 channelpresets in each band are accessed by pressing the appropriate number (0 to 9)...

1 7 Note: If the preset location already has a channel stored, the preset will be replaced by the newly stored channel. Using Channel Presets The active band of presets (A, B, C) is displayed in the lower right corner of the default display screen. Tochange the active band, momentarily press and rel...

1 9 4. To exit the channel list mode, press and hold the DISP button for approximately one second, until the display reverts to the P.TUNE mode. 5. To exit the P.TUNE mode, press and hold the BAND button for approximately 1 second, until the default display screen is displayed. Memory (MEMO) and SIR...

2 3 Using the CHANNEL UP and CHANNEL DOWN buttons, highlight the alert that you would like to overwrite and press the Select button to store the new alert. If the new alert was successfully saved in memory, an Artist/Song/Game Stored" pop-up screen followed by an "X Used/Y Empty" screen ...

2 6 The Receiver then displays the S-Seek Alert or My Game Zone screen, which displays a list of the currentmatches. No alert is provided for the currently selected channel. You can now select the artist, song, or sports game that you wish to tune to by using the CHANNEL UP and CHANNEL DOWN buttons ...

2 8 FM Frequency Button The Receiver has a special button called the FM Frequency button, which is identified by the icon. When the FM Frequency button is pressed, the Receiver turns on the built-in FM transmitter and begins transmitting on the chosen frequency from the FM frequency preset list. A s...

Instant Replay The Receiver has a feature called “Instant Replay” which stores the audio of the channel to which you arelistening for later playback. Approximately 30 to 60 minutes of audio depending upon the channel to which youare tuned is stored. As soon as you tune to a channel, the Receiver aut...

3 1 Using Instant Replay To begin using the Instant Replay feature of the Receiver, press the Pause/Play button. This causes the Receiver to enter the Instant Replay Pause mode, which mutes the audio from the Receiver. A "Paused"message will be displayed for two seconds to confirm that the R...

3 3 The portion of the Progress Bar behind the Play Position indicator shows how much you can rewind in theInstant Replay memory, while the filled portion ahead of the Play Indicator shows how much you can fastforward in the memory. While you are in the playback mode, the Receiver continues to store...

3 4 3 4 Menu Options To enter the Menu Options page of the Receiver, press the MENU button. The "Menu Options" list will be displayed. To select a menu option, use the CHANNEL UP and CHANNEL DOWN buttons to highlight the option you wish to adjust and press the Select button. If a selection i...

3 9 3 9 Traffic To set the Jump button to provide a traffic report when pressed, do the following: 1. Use the CHANNEL UP and CHANNEL DOWN buttons to highlight the "Traffic" option, and press the Select button. 2. A screen showing a list of cities will be displayed. 3. Use the CHANNEL UP and ...

4 0 4 0 JumpSet To set the Jump button to a specific channel (other than a traffic channel), do the following: 1. Use the CHANNEL UP and CHANNEL DOWN buttons to highlight the "JumpSet" option, and press the Select button. 2. The following screen will be displayed: Use the CHANNEL UP and CHAN...

4 2 Memory Options The Memory Options feature allows you to set whether the automatic S-Seek feature is On or Off and alsoprovides a way to clear (erase) all of the stored S-Seek alerts from memory. Automatic Memory Search To turn the automatic memory search On or Off, do the following: 1. Use the C...

4 5 Confirmation Tone The Receiver will sound an audio tone alert when it is powered On or Off, when an S-Seek alert is activated aswell as other alerts. The default setting is "On". To change the "Confirmation Tone" setting to On or Off, use the CHANNEL UP and CHANNEL DOWN buttons t...

4 7 4. When the correct code has been entered, a listing of channels will be displayed. Use the CHANNEL UP and CHANNEL DOWN buttons to navigate to the channel you wish to lock or unlock, and press the Select button. A previously locked channel will have the word "Lock" displayed to the right...

5 0 Time Based Features These settings allow for adjustment of the following features of the Receiver: Clock - Sets the clock format, time zone, and daylight savings time function. Alarm - Sets an alarm for a specific time. Program Alert - Sets the Receiver to tune to a specific channel at a specifi...

5 1 Format To change the clock display format of the Receiver to 12 hour or 24 hour format, do the following: 1. Use the CHANNEL UP and CHANNEL DOWN buttons to highlight "Clock" and press the Select button. 2. Use the CHANNEL UP and CHANNEL DOWN buttons to highlight either "12 hour" ...

Sirius Satellite Map Due to the paths of the Sirius satellites over the US, the best location for the antenna inyour home depends on where you live. Use the map below as a general placementguideline. Area 1 : Place the antenna at an EAST facing window. Area 2 : Place the antenna OUTSIDE, away from a...

5 9 Factory Default The Factory Default option will restore most features of the Receiver to the original factory settings. Thefollowing is a list of all features affected by the Factory Default option: • All Presets are cleared• All Game Alerts are cleared• Receiver set to Normal Tuning Mode• Displ...

6 1 Problem Solving Section For your assistance, we have listed a few common problems below. The XACT Sirius Satellite Radio Receiver does not work . Please check the Power Cables. Make sure you have contacted Sirius to activate your Sirius Satellite Radiosubscription 1-888-539-SIRIUS (7474). I have...

6 2 WARRANTY W Wa arrrra an ntty y IIn nffo orrm ma attiio on n X XA AC CT T C Co om mm mu un niic ca attiio on n One-Year Limited Warranty This limited warranty sets forth all XACT Communication responsibilities regarding your product. There are no other expressed or implied warranties from XACT Co...

6 3 WARRANTY W Wh ha att T To o D Do o ffo orr W Wa arrrra an ntty y S Se errv viic ce e During the first thirty (30) days, a defective product is eligible for over-the-counter exchange at the retailer fromwhom it was purchased. After thirty (30) days, the defective product should be returned to the...

Call Toll Free 1-866-466-XACT (9228) or Visit our Website: www.getxact.com To activate your XACT Sirius Satellite Radio Receiver or for latest news and questions regarding Sirius Satellite Radio service visit www.sirius.com or call 1-888-539-SIRIUS (7474).