Sirius Satellite Radio ISP2000 - Manual

10 onyX Functions 2 3 4 5 6 7 8 9 0 direct jump FM menu 1 Power Button Turn radio on and off . Left and Right Arrows Search for channels by category . Up and Down Arrows Scroll through lists and preview channels; also highlight menu options . Menu Button Access advanced features and configuration op...

11 Power Connect Vehicle Dock Color-Coded Connections The color-coded PowerConnect Vehicle Dock makes it simple to connect . Just match the colors on the cable ends to the colors on the dock to see what goes where . ANT (Silver) Connection for the Magnetic Mount Antenna . AUDIO (Green) Connection fo...

14 Step 1: Choose a Location for Your Radio When installing the onyX in your vehicle, choose a location where it will not block your vision, interfere with the controls, or obstruct the air bag . The location should be easily accessible and provide good visibility of the display, and should not be l...

16 Vehicle Installation Step 2: Install the Dash or Vent Mount Depending on your situation, you can either choose to use the Dash Mount or the Vent Mount . IMPORTANT! When you install the chosen mount, do not attach the dock to the mount . All cables should be attached to the dock prior to connectin...

18 Vehicle Installation Installing the Vent Mount: 1 Locate a vent with horizontal louvers sturdy enough to hold your PowerConnect Vehicle Dock and radio . 2 If the vent louvers in your vehicle are recessed, you may need to use the longer vent clamps with the Vent Mount . If so, remove the shorter v...

20 Step 3: Mount the Magnetic Mount Antenna The Magnetic Mount Antenna contains a strong magnet which will stick to any metal part of your vehicle, but will not damage the vehicle . To install the Magnetic Mount Antenna: 1 Choose the best location for your antenna considering your vehicle type . Pay...

25 Step 4: Route the Magnetic Mount Antenna Cable Before you begin routing the antenna cable, read these general instructions for how to route and hide the antenna cable . Then route your antenna cable according to the instructions which follow for your specific type of vehicle . Feed cable under ru...

30 Vehicle Installation • Sedan/Coupe With Antenna Placed at the Rear of the Roof: 1 . Feed the antenna cable from the antenna underneath the rubber molding around the rear window . Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the rear window and tuck the a...

32 • Sedan/Coupe With Antenna Placed at the Front of the Roof: 1 . Feed the antenna cable from the antenna underneath the rubber molding around the windshield . Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the windshield and tuck the antenna cable underneat...

37 Step 5: Connect the Magnetic Mount Antenna and Power Connect Power Adapter 1 Plug the Magnetic Mount Antenna into the silver ANT connector on the PowerConnect Vehicle Dock . 2 Insert the PowerConnect Power Adapter into your vehicle’s cigarette lighter or power adapter socket . 3 Plug the PowerCon...

38 Vehicle Installation Step 6: Connect the Audio To play audio through your vehicle’s stereo or FM radio, decide on one of the following audio connection options: • Option 1: Best: Use the Aux In Cable if your vehicle’s stereo system has an auxiliary input connection . Refer to your vehicle’s owner...

39 Option 1: Aux In Cable Installation Instructions 1 Plug one end of the Aux In Cable into the green AUDIO connector on the dock . 2 Plug the other end into the auxiliary input jack connection of your vehicle’s stereo system . 3 Insert the dock into the mount . 4 Insert your onyX into the dock . 5 ...

40 display screen that denotes antenna signal strength . You can also press menu and then press to scroll to and highlight Signal Indicator . Press the Select button . The Satellite and Terrestrial bars show the strength of the signal being received . If the signal reception is good, press and hold ...

41 Option 2: Cassette Adapter Installation Instructions 1 Plug the Cassette Adapter into the green AUDIO connector on the dock . 2 Insert the Cassette Adapter into the vehicle’s cassette deck . You may need to turn on your vehicle’s stereo system in order to do so . 3 Insert the dock into the mount ...

43 Option 3: Power Connect Installation Instructions 1 Insert the dock into the mount . 2 Insert your onyX into the dock . 3 Power on your onyX by pressing the Power button . 4 Be sure the vehicle is outside and the antenna has a clear view of the sky . Verify that you are receiving the XM signal . ...

46 and to tune in steps of .2, i .e ., 99 .3 to 99 .5 . Press and to tune in steps of 1, i .e ., 99 .3 to 100 .3 . Press the Select button to select the FM channel . v . Start Using is highlighted . Press the Select button . vi . The FM channel you selected will be confirmed on the display screen . ...

50 Activation Before you can enjoy Commercial-Free Music, plus Sports, News, Talk & Entertainment, you need to activate your onyX . 1 Make sure your onyX is properly installed, turned on, and receiving the XM signal so that you can hear the audio on channel 1 . 2 Make a note of your XM Radio ID ...

52 Using Your onyX The Main Display When listening to a channel, information about the channel is displayed . Smashing Pumpkins Bullet With Butterfly Wings 54 Lithium Antenna Signal Strength Channel Number Channel Name Artist Name or Talk Show Host or Sports Teams/Score Song Title or Talk Show Sched...

53 Navigation Basics Power Button Pressing the Power button turns the onyX On or Off . Navigation Buttons Use the Left, Right, Up, and Down buttons to navigate through various features and functions of onyX . • Left or Right button: Displays the channel categories such as Rock, Pop, Sports, Talk/New...

54 Using Your onyX Menu Button Pressing menu displays various options to make setup and feature changes . Pressing menu when in menu options returns to the previous menu option screen until menu options is exited . Pressing and holding menu returns to the main display screen in most instances . FM B...

55 Listening to Satellite Radio Tune a channel: 1 Press and release and to immediately tune to the next or previous channel . 2 Press and hold and to quickly scroll through the channels . Release to tune to the channel that is displayed . View a category: Channels are organized into categories to ma...

56 Direct Tune A channel can be tuned directly by entering the channel number using the number buttons . 1 To directly tune a channel press direct . Direct Tune Enter channel # 6 2 _ 2 Use the number buttons 0-9 to enter the channel number and wait a moment until the channel is tuned, or press the S...

58 Using Your onyX Favorite Channels You can set up to 10 of your favorite channels so you can easily access them . Each favorite channel can be assigned to a number button . To assign a favorite channel to a number button: 1 Tune to the desired channel . 2 Press and hold the number button 0-9 you w...

59 Scanning Channels in a Category You can scan a category and listen to each channel for 10 seconds before the next channel is automatically tuned . If you want to stay tuned to the channel being played and stop the scan, just press the Select button . To scan a category: 1 Press or until the desir...

60 FM Presets FM presets make it easy to quickly access stored FM channels and choose a new FM channel from them . Use FM presets when you use PowerConnect to listen to your onyX through your vehicle’s FM radio . (Refer to “Option 3: PowerConnect Installation Instructions” on page 43 for more inform...

64 Special Features Color Themes You can change the color of the display screen to one of 6 color themes: Blue, Red, Amber, Yellow, Silver, or Teal . You can coordinate the color theme with your vehicle dash lights and with the Trim Ring of your choice for your onyX . The default color theme is blue...

65 Trim Rings Your onyX has a changeable Trim Ring to style the radio to your liking . The Trim Ring surrounds the Select button on the radio . A total of three trim rings are included with your onyX, including the one that is already installed in the onyX Radio . men u jum p direc t FM 1 2 3 4 5 6 ...

67 Special Features tool counter-clockwise until it will not rotate any further . 3 The Trim Ring is now loose . Turn the onyX over and the Trim Ring should fall out . If it does not, gently tap the back of the radio until it does . 4 Turn the radio face up again and insert the new Trim Ring into th...

68 Special Features Parental Controls Your onyX has a parental control feature which will allow you to lock access to channels, or lock access to an entire category . A 4-digit code controls access to the locked channel or locked category . When you browse a category, the locked channel number or lo...

69 Special Features Controls will be highlighted . Press the Select button . You will be prompted to select a 4-digit code: i . For each digit, press one of the 0-9 keys and then press to advance to the next digit . (Press if you need to go back and edit a previous digit .) ii . When you have select...

70 Special Features the Select button . 3 At the “Parental Controls” screen, Parental Controls will be highlighted . Press the Select button to turn parental control On (or press the Select button to turn parental control Off) . 4 Press and hold menu to return to the main display screen . To lock (o...

71 Special Features channel or category and press the Select button . The lock icon will disappear indicating the channel or category is unlocked .) Locked Channels Locked Categories Locked Channels Rock Locked Channels Rock Deep TracksHair NationxL Liquid MetalSIRIXM U Deep TracksHair NationxL Liqu...

72 4 When you have entered all 4 digits of the code press the Select button . 5 If Parental Controls are shown as Off, press the Select button to turn it On, otherwise continue with the next step . 6 At the “Parental Controls” screen, Press to scroll to and highlight Change My Code . Press the Selec...

73 Special Features To listen to a locked channel: There are two ways to tune to a channel which has been locked . The first is by directly tuning the locked channel, and the second is to select the locked channel from a category list . 1 Directly tune or select the locked channel: To directly tune ...

76 Where Else Can You Use Your onyX? SIRIUS | XM offers a variety of accessories that allow you to adapt your onyX Radio to your lifestyle and enhance your listening experience . With these accessories, you can effortlessly take your Satellite Radio listening experience from your vehicle to your hom...

78 Configuring Your onyX Radio ID Your onyX has an alphanumeric ID which uniquely identifies the radio . This ID is used during the activation process . To display the Radio ID: 1 Press menu . 2 Radio ID will be highlighted . If it is not highlighted, press to scroll to and highlight Radio ID . Pres...

79 Find Available FM Channels in Your Area Before attempting any of the procedures below, you should park your vehicle in a safe location . Do not attempt to set up your FM channels or any onyX function while driving . PowerConnect allows you to listen to XM audio through your vehicle’s FM radio . Y...

80 vehicle’s radio . If you are satisfied with the sound quality, you’re done! If this FM channel doesn’t work well for you, work down the list until you find an FM channel that allows you to hear XM clearly . OR 2 Manually tune through your local FM channels Manually tune through your local FM chan...

82 Set and Select an FM Channel The onyX allows you to easily store (i .e ., preset) up to 5 different FM channels . At any time, you can select any one of these 5 FM presets to transmit audio from the onyX to your vehicle’s FM radio . Having a choice of 5 FM presets also makes it easy to switch to ...

84 7 The chosen FM channel will be confirmed on the display screen and the onyX will tune to that FM channel . 8 Set your vehicle’s FM radio to same FM channel . IMPORTANT! You’ll first need to find a suitable FM channel that is unused or available in your area . Set your vehicle radio to the above ...

85 Configuring Your onyX To quickly select an FM channel from the preset list: 1 Press FM to display the current FM preset . 2 To display and select the next FM preset, press FM . The radio will tune to the displayed FM channel . If the preset is the one you want, press menu or wait for the screen t...

86 Jump Settings The jump button can be configured to either jump to the traffic and weather channel of one of the 20 most congested cities, or to jump back to the last channel to which you were listening . When configured for traffic/weather, you’ll need to select a desired city from the list . To ...

87 Configuring Your onyX 6 A list of cities will be displayed . Press to scroll to and highlight your desired location and press the Select button . 7 The JUMP Settings screen will display the location you selected . Press and hold menu to return to the main display screen . JUMP Settings ModeSet Lo...

88 Set Brightness To change the display’s brightness: 1 Press menu . 2 Press to scroll to and highlight Brightness and press the Select button . 3 Press to decrease or to increase the brightness of the display . 4 Press the Select button to confirm the brightness setting . 5 Press and hold menu to r...

89 Configuring Your onyX Set Audio Level The audio level of the onyX can be adjusted when an audio connection is made between the dock and the vehicle’s stereo system . Audio level is used to adjust the onyX’s volume level to match the volume of other audio sources you may use, such as a CD player, ...

90 Signal Indicator For best reception, your Magnetic Mount Antenna should have an unobstructed view of the XM satellites . In large cities, there are terrestrial transmitters (ground repeaters) to help increase the signal coverage . Your onyX can display the received strength of the satellite and t...

91 Factory Settings The factory settings menu has two choices, AUX Detect and Restore Defaults . AUX Detect AUX Detect allows the onyX Radio to automatically detect a connection made to the AUDIO connector of the PowerConnect Vehicle Dock by an Aux In Cable or Cassette Adapter . AUX Detect is enable...

92 2 Press to scroll to and highlight Factory Settings and press the Select button . 3 AUX Detect should be highlighted and show as enabled . Press the Select button to toggle the setting . 4 A warning screen will be displayed . Press the Select button to confirm that you want to disable AUX Detect ...

93 Restore Defaults You can clear all of your personal settings, such as favorite channels, FM presets etc . and return the radio to its original out-of-the-box settings To reset onyX to factory defaults: NOTE! Restoring defaults permanently removes all personal settings . 1 Press menu . 2 Press to ...

94 Demo Mode Your onyX has a demo mode that starts playing when, for a prolonged period of time (more than 5 minutes), the radio either detects it’s not connected to the antenna, or the antenna stops receiving a signal . It disappears when the antenna is connected properly or when the radio starts r...

95 5 Press to scroll to and highlight Enter Demo Mode and press the Select button . The demo mode will start in 10 seconds . 6 To exit demo mode at any time, press and hold the Select button for 10 seconds . Demo Mode Entering Demo Mode. Press & Hold Select for 10 seconds to exit Configuring You...

96 Using the Vehicle Dock From the Universal Xpress Car Kit If you have chosen to use the Vehicle Dock from the Universal Xpress Car Kit rather than the PowerConnect Vehicle Dock included with your onyX radio, you will need to complete some additional installation steps . When you have completed the...

98 Turn FM Transmitter On/Off Turning the FM Transmitter On applies only if you are using the older model Vehicle Dock from the Universal Xpress Car Kit, and plan to use SureConnect or FMDA as the audio connection option . You’ll have to turn On the FM Transmitter under the FM Settings menu . Howeve...

99 Configuring Your onyX To turn the FM Transmitter Off: If you are using the older model Vehicle Dock from the Universal Xpress Car Kit, and plan to use the Aux In Cable or a Cassette Adapter as the audio connection option, you’ll have to turn the FM Transmitter under the FM Settings menu in the on...

102 onyX has been designed and built to be trouble-free but if you experience a problem, try this: • Check that all connections are firm and secure . • Make sure the vehicle power socket is clean and free of corrosion . • Make sure you have connected the onyX as described in this User Guide . Verify...

108 Product Specifications System Power Requirements: 9-16 V DC,500 mA (max) Operating Temperature: -20 ° C to +60 ° C (-4 ° F to +140 ° F) Audio Output: 1 .0 Vrms (max) onyX Radio Dimensions: 115 mm (width) x 61 mm (height) x 17 mm (depth) 4 .5 in (width) x 2 .4 in (height) x 0 .7 in (depth) Weight...

109 Patent and Environmental Information Patent Information It is prohibited to, and you agree that you will not, copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise access and/or make available any technology incorporated in this product . Furthermore, the AMBE ™ voice co...

110 The user is cautioned that changes or modifications not expressly approved by SIRIUS XM Radio Inc . can void the user’s authority to operate this device . This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: 1 . This device may not cause harm...

111 ©2009 SIRIUS XM Radio Inc . “SIRIUS”, “XM” and all related marks and logos are trademarks of SIRIUS XM Radio Inc . and its subsidiaries . “BBC” and “Radio One” are trademarks of the British Broadcasting Corporation and are used under license . BBC logo © BBC 1996 . Radio 1 logo © BBC 2001 . Cosm...

112 Owner’s Record The radio model number is located below and the XM Radio ID is located on the label on the back of the onyX . Record the XM Radio ID in the space provided below . Refer to these numbers whenever you call your dealer regarding this product . Radio Model Number: XDNX1 XM Radio ID:__...