Simplicity 2000 Series - Manual
Simplicity 2000 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation Instructions; RPM Rear PTO; Figure 4. Attach Mounting Plate
- Page 3 – Install Rear PTO Switch; you should accidentally remove too much; Connect Wiring; Figure 6. Switch Template
- Page 6 – NOTES
Installation
Instructions
2000
RPM Rear
PTO
Mfg. No.
1692891
For Legacy 2000 2900 Series Garden Tractors
Figure 1. Install O-Rings
A. Mounting Plate Alignment Pins
B. O-Rings
WARNING
B e f o r e b e g i n n i n g i n s t a l l a t i o n , e n g a g e t h e p a r k i n g
b r a k e , s h u t t h e P T O o f f , t u r n t h e i g n i t i o n o f f , a n d
r e m o v e t h e k e y .
ASSEMBLY
1. Install the two o-rings (B, Figure 1) on the mounting
plate alignment pins (A)
2. Grease the front and back bearing grease zerks
( s e e F i g u r e 2 ) .
T h i s k i t e q u i p s
S e r i e s t r a c t o r s
with a 2000 RPM rear PTO.
I
F i g u r e 2 . G r e a s e B e a r i n g s
G r e a s e F r o n t
and Back
Bearing
G r e a s e
INSTALLATION
install PTO Box
1. Remove the rear bumper and mounting hardware.
2. Remove the set screw (A, Figure
the hydro
pump shaft and fan assembly.
NOTE: For easier access to the set screw (A, Figure
remove the
(B, Figure 3) retaining the fan, and
remove the fan.
3. Remove the fan and shaft assembly from the output
Figure 3. Remove Hydro Fan Shaft Assembly
shaft.
A. Setscrew
B.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation Instructions 2000 RPM Rear PTO 4. Attach the mounting plate (A, Figure 4) to the trans- mission using two socket-head capscrews (B) as shown. Torque capscrews to 60-65 ft. Ibs. DO NOTover-torque. Be sure the alignment pins and O-ringsare facing toward the back of the tractor. 5. Grease ...
2000 RPM Rear PTO Installation Instructions Install Rear PTO Switch 1. Using the template (A, Figure 6) and a scratch awl, scribe the switch hole pattern into the lower left cor-ner of the dashboard as shown. 2. Drill out the the area to be cut out. 3. Cut the plastic dashboard along the scribed pat...
Installation Instructions NOTES 2000 RPM Rear PTO M A N U F A C T U R I N G , I N C . 500 N Spring Street PO B OX 997 Port Washington, WI 53074.0997 USA Form No. 1998 Simplicity Manufacturing, Inc. All Rights Reserved
