Shure SE112M+ - Manual

Sound Isolating™ Earphones

SE112

Wearing the Earphones

The following are some suggested ways of wearing the

earphones.

Over the ear

Using the Remote (m+

models only)

Use the remote to control compatible media phone players.

Play music

Click the center button once

Pause music

Click the center button once.

Change volume Click the volume up (+) or volume down (-)

button to increase or decrease the volume.

Go to next

track

Double-click the center button.

Go to previous

track

Triple-click the center button.

Restart current

track

Triple-click after 6 seconds.

Fast-forward

Double-click and hold the center button.

Send/End Call

Click the center button once.

For more information about compatible models go to: www.

shure.com

©2014 Shure Incorporated

27A25176 (Rev. 3)

“Made for iPod,” “Made for iPhone,” and “Made for iPad”

mean that an electronic accessory has been designed to

connect specifically to iPod, iPhone, or iPad, respectively,

and has been certified by the developer to meet Apple per-

formance standards. Apple is not responsible for the oper-

ation of this device or its compliance with safety and regu-

latory standards. Please note that the use of this accessory

with iPod, iPhone, or iPad may affect wireless performance.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch, and

Retina are trademarks of Apple Inc., registered in the U.S. and oth-

er countries. iPad Air and iPad mini are trademarks of Apple Inc.

The trademark “iPhone” is used with a license from Aiphone K.K.

Inserting the Earphones

Insert the earphones so they form a tight seal. The fit of the ear-

phone can greatly affect sound quality.

Important:

If there seems to be a lack of low frequency

response (bass), this means that the earphone sleeve is not

forming a tight seal. Gently push the earphone deeper into the

ear canal or try a different sleeve.

Warning:

Do not push the earphone sleeve beyond the ear

canal opening.

Removing the Earphones

Grasp the body of earphone and gently twist to remove.

Note:

Do not pull on cable to remove earphone.

Changing Sleeves

• Twist and pull to remove the sleeve from the nozzle.
• Slide on a new sleeve so that it completely covers the barb

and the nozzle.

Caution:

If the barb or any of the nozzle is exposed, the

sleeve is not properly installed. Replace sleeves if they do not

tightly grip the nozzle. To ensure proper fit and performance, use

only sleeves supplied by Shure (unless using custom molded

sleeves).

Choosing a Sleeve

Soft flex sleeves are included in small, medium, and large sizes.

Select an earphone sleeve that provides the best fit and sound

isolation. It should be easy to insert, fit comfortably, and easy

to remove.

Soft Flex Sleeves

Cleaning the Nozzle

If you notice a change in sound quality, remove the sleeve and

check the nozzle of your earphone. If nozzle is blocked, clear

obstruction by using wire loop end of cleaning tool.

Nozzle Cleaning Tool

Nozzle

Warning:

The cleaning tool is only to be used to clean the

earphones. Any other use, such as using the tool to clean ears,

could result in injury.

Maintenance and Cleaning

Careful maintenance ensures a tight seal between the sleeve

and nozzle, improving sound quality and product safety.
• Keep the earphones and sleeves as clean and dry as

possible.

• To clean sleeves, remove them from earphones, gently rinse

in warm water and air dry. Foam sleeves require a longer

drying time. Inspect for damage and replace if necessary.

Ear sleeves must be completely dry before reusing.

• Wipe the earphones and sleeves with mild antiseptic to avoid

infections. Do not use alcohol-based disinfectants.

• Do not expose earphones to extreme temperatures.
• Replace sleeves if they do not fit properly.
• Do not attempt to modify this product. Doing so will void the

warranty and could result in personal injury and/or product

failure.

Accessories

For information about earphone accessories and other Shure

products visit:
www.shure.com
Furnished accessories subject to change.

Certifications

This product meets the Essential Requirements of all relevant

European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.

shure.com/europe/compliance

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: 49-7262-92 49 0

Fax: 49-7262-92 49 11 4

Email: [email protected]