Shure BLD5760 - Manual
Shure BLD5760 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
GE
GE Protimeter Aquant
®
Sensing
User Instructions
INS5760, Rev. A1
April 2007
Introduction
The
GE Protimeter Aquant BLD5760
moisture detector is used to
assess and monitor the relative moisture level of non-conductive
and porous materials: such as plaster, masonry, concrete and
fiberglass (GRP). It is an ideal instrument for making rapid surveys
of solid walls and floors and to pinpoint areas of concern in tiled
shower cubicles, GRP boat hulls, motor homes and caravans etc.
The Aquant BLD5760 has a digital display that is synchronized
with a color coded
LED
scale. The digital display shows the relative
moisture level of the material under investigation on a scale of 0-
1000 and the
LED
scale indicates moisture condition of the material.
The color-coded zones signify the moisture condition of the material under investigation. The
green
,
yellow
, and
red
color-coded zones indicate the following:
•
Material in the
green
zone is in a safe air-dry condition.
•
In the
yellow
zone moisture levels are higher than normal but not critical; further investigation is
recommended.
•
The
red
zone represents excessive moisture levels. If sustained, red zone moisture levels will lead
to decay in organic materials.
1 Operation
The Aquant BLD5760 moisture detector has a radio frequency transceiver located in the bulge on it’s
underside to give relative readings within the material against which it is held up to a nominal depth of
3/4 in. (19 mm). The depth of measurement is subject to the characteristics of the material under test.
To use the Aquant, do the following:
1.
Hold the Aquant away from surfaces as shown and switch
ON
by pressing
momentarily. The instrument may now be used to take measurements
or zeroed as appropriate.
2.
Zero the instrument (with respect to the environment in which it is about to
be used) by pressing and holding for 3 seconds, until the word
“
nuL
”
appears in the display.
3.
Release ;
“
nuL
”
will flash for a few seconds and then disappear from
the screen. The Aquant is now zeroed.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
