Shure 27C8642 - Manual
Shure 27C8642 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – ENGLISH; INTRODUCTION; System Combinations
- Page 4 – T2 Handheld Microphone Transmitter (Figure 2); For best operation, the antenna
- Page 5 – Connecting the T88 Wireless Receiver; The receiver squelch control is factory preset at the 12; Operating the T2 Hand Held Microphone Transmitters; Transmitter Battery Installation.; Transmitter Battery Installation; TRANSMITTERS
- Page 6 – Installing the Anti-Roll Device; FIGURE 8; Gain Adjustment; FIGURE 9; Operating T1 Body-Pack Transmitters
- Page 7 – Transmitter audio gain adjustment; Problem
- Page 8 – Specifications; T1 Pin Connections
- Page 9 – Licensing Information; Shure Incorporated
The Twin Pro Wireless Microphone System
User Guide
©2006 Shure Incorporated
27C8642 (Rev.
4
)
Printed in U.S.A.
The Twin Pro
Wireless Microphone System User Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 ENGLISH INTRODUCTION The Twin Pro ä Wireless System is the finest in its class. This system will give you excellent performance for years to come. System Contents The Twin Pro Wireless System contains the following components: • One T88 dual channel wireless receiver• Two transmitters available in...
2 ENGLISH T2 Handheld Microphone Transmitter (Figure 2) FIGURE 2 1 POWER ON/OFF Switch. Turns transmitter on and off. 2 POWER Indicator. Lights when transmitter is turned on. 3 LOW BATTERY Indicator. Red light glows when you have one hour or less of useful operating time; when this light glows, chan...
3 ENGLISH USING THE T88 WIRELESS RECEIVER Connecting the T88 Wireless Receiver FIGURE 4 1. Connect the receiver outputs for channels 1 and 2 to the mixer or karoake unit using unbalanced, single-conductor, shielded cables with1/4-inch phone plugs. 2. Connect the ac adapter to the POWER jack on the r...
