Sharp QT-90W - User Manual - manualsarea.com

Page 2 - Accessory

E-1 Special Notes ● The letters in brackets contained in the model number indicate the colour of theproduct only. Operation and specificationsare unaffected. ● Audio-visual material may consist of copy- righted works which must not be recordedwithout the authority of the owner of thecopyright. Pleas...

Page 3 - Controls and Indicators

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 22 23 21 20 0 1. Function/Beat Cancel Switch 0 2. Cassette Compartment 0 3. Record Button 0 4. Play Button 0 5. Rewind Button 0 6. Fast Forward Button 0 7. Stop/Eject Button 0 8. Pause Button 0 9. Volume Control 10. Band Selector11. Extra Bass Control1...

Page 5 - Sound Control

FM MW and SW1 SW1 and SW2 E-4 1 Set the FUNCTION switch to RADIO. 2 Set the BAND SELECTOR switch to FM,MW, SW1 or SW2. 3 Turn the TUNING control to tune in to adesired station. The FINE TUNING con-trol functions only for SW1 and SW2bands. 4 Set the FUNCTION switch to FM (ST) toreceive FM stereo tran...

Page 6 - Listening to a Cassette Tape; Cassette tape

E-5 Listening to a Cassette Tape ■ Cassette tape ● For playback, use normal or low-noise tapes for the best sound. (Metal or CrO 2 tapes are not recommended.) For recording, use onlynormal tapes. ● Do not use C-120 tapes, or poor-quality tapes, as they may cause malfunctions. ● Before loading a tape...

Page 7 - Recording to a Cassette Tape; Recording from the radio

E-6 Recording to a Cassette Tape Before recording: ● When recording important selections, make a preliminary test to ensure that the desiredmaterial is properly recorded. ● SHARP is not liable for damage or loss of your recording arising from malfunction ofthis unit. ■ Recording from the radio 1 Set...

Page 8 - Mixing from a Microphone; Mixing from a microphone

E-7 Mixing from a Microphone ,, ,, ■ Recording of mixed soundto a cassette tape You can record mixed sound from an externalmicrophone and other sources. 1 To p r o t e c t t h e s p e a k e r s f r o m s h o c knoise and to avoid disturbing noises, setthe VOLUME control to minimum. 2 Connect the mic...

Page 9 - Using External Units; To record on a tape

E-8 Using External Units ■ Listening to the playbacksounds from CD player etc. Set the FUNCTION switch to TAPE before con-necting or disconnecting any component. 1 Use a connection cable to connect the CD player etc. to the LINE IN sockets. (red → right channel, white → left channel) 2 Set the FUNCT...

Page 10 - Specifications; Cleaning the cabinet; Maintenance; General

E-9 Specifications SHARP reserves the right to make design and specification changes for product improvementwithout prior notice. ■ Cleaning the tape-handlingparts ● Dirty heads, capstan or pinch roller can cause poor sound and tape jams. Clean these partswith a cotton swab moistened with commer-cia...

Sharp QT-90W - User Manual

Table of Contents:

Summary