Page 2 - or; and of
[ 773.0 ] [ 516] [ 699.2 ] [ 45.0 ] [ 270.2 ] [ 85.7] [ 143.0 ] [ 200.0 ] [ 200.0 ] [ 103.3 ] [ 328.9 ] [ 393.8 ] [ 573.0 ] [ 528.0 ] SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be ...
Page 3 - OPERATION MANUAL; Contents; ENGLISH
OPERATION MANUAL Contents ............................................................................. 1Introduction ........................................................................ 2 Dear SHARP customer ................................................. 2Important Safety Precautions ..........
Page 4 - Precautions when transporting the TV; Introduction; Dear SHARP customer
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet ba...
Page 5 - Remote control unit
Introduction 15 16 17 18 19 20 21 22 23 24 25 4 3 2 5 6 7 8 9 10 11 12 13 14 1 B (Standby/On) (Page 10) Buttons for useful operations m (Teletext) ATV: Display analogue teletext (Page 13).DTV: Select MHEG-5 and teletext for DTV (Page 13). k (Reveal hidden Teletext) (Page 13) [ (Subtitle) Switch subt...
Page 6 - WARNING
Introduction 2 1 3 16 7 8 9 10 4 5 6 13 12 11 14 15 EXT4 (ANALOGUE RGB/AUDIO) terminals*HDMI1 (HDMI) terminalHDMI2 (HDMI/AUDIO) terminals*EXT3 (COMPONENT/AUDIO) terminalsOUTPUT (AUDIO) terminalsDIGITAL AUDIO OUTPUT terminal 1 234 56 TV (Front view) TV (Rear view) Antenna terminalRS-232C terminalEXT1...
Page 7 - NOTE; Preparation; Supplied accessories; CAUTION
LC-32DH77E, LC-32DH77S: Confirm that there are eight screws with the stand unit. Attach the supporting post for the stand unit onto the base using the four screws with the screw driver (supplied) as shown. Inserting the stand. Insert the stand into the openings on the bottom of the TV (Hold the stan...
Page 8 - Inserting the batteries; Open the battery cover.; Close the battery cover.; Using the remote control unit
Preparation Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size zinc-carbon batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. Open the battery cover. Insert two s...
Page 9 - Quick guide; Initial installation overview; Turn on the power using; Country setting; Start searching
Quick guide 1 2 3 Initial installation overview Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. Connect an antenna cable to the antenna terminal (Page 8). If necessary, insert a CA card into the...
Page 10 - Mounting the TV on a wall; Before turning on the power
Quick guide Supplying power to the antenna You must supply power to the antenna in order to receive digitally/terrestrially broadcast stations after connecting the antenna cable to the antenna terminal on the rear of the TV. Press MENU and the “MENU” screen displays. Press c / d to select “Setup”. P...
Page 11 - Initial auto installation; Checking signal strength
Quick guide Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. Press a on the TV. The initial auto installation wizard appears. Setting the OSD langua...
Page 12 - Watching TV; Selecting a sound mode; Daily operation; Turning on/off the power; TV indicator status; Changing channels; With P; Selecting an external video source
Watching TV Selecting a sound mode DTV mode: If multi sound modes are received, each time you press 2 the mode switches as follows. Audio (ENG) : STEREO L/R L R LR Audio (ENG) : CH A CH A CH B CH AB Audio (ENG) : MONO Press c / d to select L or R sound when the STEREO or DUAL MONO screen is displaye...
Page 13 - EPG
Watching TV Useful functions E Common Operation Press MENU and the “MENU” screen displays. Press c / d to select “Digital Setup”. Press a / b to select “EPG Setup”, and then press OK . Digital Setup REC Picture Size Download Setup EPG Setup Subtitle CI Menu [Yes] [16:9 TV] Press a / b to select the ...
Page 14 - Selecting a programme using EPG
Check programme information Press a / b / c / d to select the programme you want to check. Press R . 04010 : 00AM - 1 : 00 AM BBC News 24 BBC News Programme Info. Back to EPG The BBC’s rolling news service with headlines every 15 minutes. 10 AM 11 0 PM 1 2 3 BBC TWO 002 BBC THREE 007 BBC FOUR 010 BB...
Page 15 - Buttons for teletext operations; Teletext; Turning Teletext on/off; Press
Buttons for teletext operations Buttons Description P r / s Increase or decrease the page number. Colour (R/G/Y/B) Select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pressing the corresponding Colour (R/G/Y/B) on the remote control unit. 0–9 Directly s...
Page 16 - Connecting external devices; Introduction to connections
Connecting external devices Before connecting ... Be sure to turn off the TV and any devices before making any connections.Firmly connect a cable to a terminal or terminals.Carefully read the operation manual of each external device for possible connection types. This also helps you get the best pos...
Page 17 - HDMI connection; Supported video signal:; Component connection; VIDEO connection; Game console; When using the HDMI2 terminal; Example of connectable devices; VCR; VCR
Connecting external devices HDMI connection The HDMI connections permit digital video and audio transmission via a connection cable from a player/recorder. The digital picture and sound data are transmitted without data compression and therefore lose none of their quality. Analogue/digital conversio...
Page 18 - Controlling devices with SCART using AV Link; SCART connection; Decoder
Connecting external devices NOTE In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which the decoder is connected in “Manual Adjust” in the “Analogue Setting” menu (Page 27).TV-VCR advanced AV Link systems may not be compatible wit...
Page 19 - Speaker/amplifier connection; Connect an amplifier with external speakers as shown below.; After connecting; Digital audio output setting; Amplifier with
Connecting external devices DIGITAL AUDIO IN AUX1 IN L R AUX OUT L R Connecting an amplifier with analogue audio input E Connecting an amplifier with digital audio input E Speaker/amplifier connection Connect an amplifier with external speakers as shown below. After connecting Digital audio output s...
Page 20 - Inserting a CA Card; General information on CI Module displays.
Connecting external devices Inserting a CA Card In order to receive coded digital stations, a Common Interface Module (CI Module) and a CA Card must be inserted in the CI slot of the TV (Page 8).The CI Module and the CA Card are not supplied accessories. They are usually available from your dealers....
Page 21 - AQUOS LINK; Controlling HDMI devices using AQUOS LINK; What you can do with AQUOS LINK; One Touch Play; You can select which HDMI device to operate using the; AQUOS LINK connection
AQUOS LINK Controlling HDMI devices using AQUOS LINK What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. NOTE AQUOS LINK-compatible AQ...
Page 22 - Set to “On” to enable HDMI CEC functions.; AQUOS LINK Setup
AQUOS LINK AQUOS LINK Control Set to “On” to enable HDMI CEC functions. Press MENU and the “MENU” screen displays. Press c / d to select “Option”. Press a / b to select “AQUOS LINK Setup”, and then press OK . Press a / b to select “AQUOS LINK Control”, and then press OK . Press c / d to select “On”,...
Page 23 - Playback of titles using AQUOS LINK; Operating an AQUOS LINK device; Listening with the AQUOS AUDIO speaker system; Listening with the AQUOS TV speaker system
AQUOS LINK Open the remote control unit’s flip cover, and then press OPTION . Press a / b to select “Setup Menu”, and then press OK . NOTE If a connected device does not have this function or the device is in a status where the menu cannot be displayed (recording, entering standby, etc.), this funct...
Page 24 - Menu operation; Common operations; Operation without a remote control unit; Display the MENU; Selecting in the MENU
Menu operation 1 Picture Contrast OPC [Off] Brightness Colour Tint Sharpness Advanced Reset [+30] [0] [0] [0] [0] 0 –30 –30 –30 –10 +40 +30 +30 +30 +10 Backlight [+14] –16 +16 DYNAMIC ECO Energy Save No Signal Off No Operation Off Sleep Timer [Off] [Disable] [Disable] Analogue Search Digital Search ...
Page 25 - Basic adjustment; Picture Settings; Film Mode; OPC; Automatically adjusts the brightness of the screen.; Adjustment items; Advanced; Picture adjustments; Item
Basic adjustment NOTE When set to “On”, the TV senses the surrounding light and automatically adjusts the backlight brightness. Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light. • This TV provides various advanced functions for optimising the pi...
Page 26 - Monochrome; 6 and a minimum of; AV MODE; Audio adjustment; Audio; Surround; Audio; This function allows you to enjoy realistic live sound.; Active Contrast
Basic adjustment NOTE The item marked with * is available only when selecting “HDMI1”, “HDMI2”, “HDMI3” or “EXT4” from the “INPUT SOURCE” menu.The item marked with ** is available only when accepting an “x.v.Colour” signal through an HDMI terminal. • • NOTE “3D-Y/C” may not operate depending on the ...
Page 27 - Power Save Settings; No Signal Off; Energy Save; No Operation Off; Sleep Timer; ATV
Power Save Settings ECO Energy Save No Signal Off No Operation Off Sleep Timer [ Standard] [Disable] [Disable] Basic adjustment No Signal Off ECO When set to “Enable”, the TV will automatically enter standby mode if there is no signal input for 15 minutes. Five minutes before the TV enters standby m...
Page 28 - Auto Installation; Manual Adjust; Configure various settings for each service using the; Programme Setup; Setup; Digital channel settings; Digital Setting; Additional Search; Add new services within a specified frequency band.; Buttons for Manual Adjust operation
Channel Settings Auto Installation Basic adjustment Auto Installation Setup The TV automatically detects and stores all available services in your area. This function also allows you to perform the channel setting for digital and analogue individually and reconfigure the settings after the initial a...
Page 29 - Sort; Analogue channel settings
Basic adjustment Channels with “Skip” set to “On” are passed over when using P r / s even if selected while watching the image from the TV. When connecting a decoder to the TV, you need to select “EXT1” or “EXT2”. NOTE The factory preset value is “Off”. • You can block the viewing of any channel. NO...
Page 30 - Child Lock; Enter the four-digit number as a PIN using; Language; Subtitle; Digital Audio Language; Key Lock; Option; st Language
Basic adjustment Child Lock Setup Allows you to use a PIN to protect certain settings from being accidentally changed. NOTE PIN input is required when executing “Child Lock”. The default PIN is “1234”. To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN on page 4...
Page 31 - Useful viewing functions; WSS; WSS signal 4:3 screen; Selecting the picture size
Useful viewing functions WSS Setup WSS signal 4:3 screen 4:3 Mode Setup The “WSS” signal has 4:3 auto-switching that allows you to select between “Normal” and “Panorama”. 4:3 mode “Panorama” 4:3 mode “Normal” The “WSS” allows the TV to switch automatically among the different picture size. NOTE Use ...
Page 32 - Automatic volume adjustment
You can use this menu to set the appropriate picture size for viewing a 16:9 format TV programme on a 4:3 TV. REC Picture Size Digital Setup Setting to “4:3 TV” Setting to “16:9 TV” This function allows you to automatically change to the appropriate picture size when viewing an HDMI signal using the...
Page 33 - Time Display; Game Play Time; Programme Title Display; Display Settings; You can display the channel information by pressing; Time and Title display
Useful viewing functions Time Display Option Time Format You can select the time format (either “24HR” or “AM/PM”) for the clock time. Game Play Time Option This function allows you to display the elapsed time on the screen when “AV MODE” is set to “GAME”. Programme Title Display Option This functio...
Page 34 - Other useful features; Input Select; For setting the signal type of external equipment.; Input Label; Input Skip; Colour system settings; Quick Start; Colour System; Input source settings
Other useful features Input Select Option For setting the signal type of external equipment. NOTE If no (colour) image displays, try changing to another signal type. Check the operation manual of the external equipment for the signal type. • • Input Label Setup You can label each input source with a...
Page 35 - USB Photo Viewer/Music Player; Connect an USB device to the TV as shown below.; Selecting modes and devices; Photo Mode; Viewing thumbnails; Buttons for thumbnail operations
Other useful features USB Photo Viewer/Music Player In this mode, you can enjoy viewing photos and listening to music from external USB devices. Select “USB” from the “INPUT SOURCE” menu to enter this mode. NOTE You cannot enter this mode when there is no USB device connected to the TV.This mode is ...
Page 36 - Slide show; Music Mode; Buttons for Music Mode; USB device compatibility
Slide show Selecting the BGM File name SONGS Demo/Demo1 CLASSICSONG_01.MP3SONG_02.MP3 SONG_03.MP3 SONG_04.MP3SONG_05.MP3SONG_06.MP3SONG_07.MP3SONG_08.MP3SONG_09.MP3 Time 3:053:15 3:02 6:054:520:003:133:233:33 Playing: SONG_02.MP3 Slide Show BGM: SONG_03.MP3 1:00 / 3:15 Buttons for slide show BGM sel...
Page 37 - Analogue Connection; Connecting a PC; HDMI Connection; You can select the picture size.; EXAMPLE; Setting audio input; PC Audio Select
Connecting a PC When using the EXT4 terminal, you must select “EXT4 (RGB)” in the “PC Audio Select” menu (Refer to the right column for details). NOTE The PC input terminals are DDC1/2B-compatible.Refer to page 38 for a list of PC signals compatible with the TV.A Macintosh adaptor may be required fo...
Page 38 - Selecting input resolution; Input Signal; Adjusting the PC image manually
Connecting a PC Press a / b to select the specific adjustment item. Press c / d to adjust the item to the desired position. 1 2 Reset H-Pos. [ 90] a b a b a b a b V-Pos. Clock Phase [ 39] [ 90] [ 20] NOTE You can only select the “Input Signal” on the “Setup” menu when receiving one of the two input ...
Page 39 - RS-232C port specifications
Connecting a PC C1 C2 C3 C4 P1 P2 P3 P4 Communication conditions Set the RS-232C communications settings on the PC to match the TV’s communications conditions. The TV’s communications settings are as follows: Baud rate: 9,600 bps Data length: 8 bits Parity bit: None Stop bit: 1 bit Flow control: Non...
Page 40 - PC compatibility chart
Connecting a PC NOTE This TV has only limited PC compatibility, correct operation can only be guaranteed if the video card conforms exactly to the VESA 60 Hz standard. Any variations from this standard will result in picture distortions. • CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER SETTIN...
Page 41 - Appendix; Troubleshooting; Cautions regarding use in high and low temperature environments; Information on the software license for this product
Appendix Troubleshooting Problem Possible Solution No power. • Check if you pressed B on the remote control unit. If the indicator on the TV lights up red, press B . Is the AC cord disconnected?Check if you pressed a on the TV. • •• The TV cannot be operated. • External influences such as lightning,...
Page 42 - Download Setup; Message List; Identification; Receiver Report; Information; Searching for updates*; Updating your TV via DVB-T; Downloading the software; You can select the method of update.
Appendix Download Setup Digital Setup Message List Information Go to “MENU” > “Setup” > “Reset”. Press c / d to select “Yes”, and then press OK . “Now, TV will restart automatically. OK?” displays on the screen. Press c / d to select “Yes”, and then press OK . “Now initialising...” displays on...
Page 43 - Specifications
Appendix Specifications Item 32 o LCD COLOUR TV, Model: LC-32DH77E, LC-32DH77S LCD panel 32 o Advanced Super View & BLACK TFT LCD Resolution 2,073,600 pixels (1,920 g 1,080) Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV Function TV-Standard Analogue CCIR (B/G, I, D/K, L/L’) Digital...
Page 44 - Optional accessory
Appendix Item 42 o LCD COLOUR TV, Model: LC-42DH77E, LC-42DH77S 46 o LCD COLOUR TV, Model: LC-46DH77E, LC-46DH77S 52 o LCD COLOUR TV, Model: LC-52DH77E, LC-52DH77S LCD panel 42 o Advanced Super View & BLACK TFT LCD 46 o Advanced Super View & BLACK TFT LCD 52 o Advanced Super View & BLACK...
Page 45 - End of life disposal
A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper...
Page 46 - Rating table for Child Lock; Abbreviation list
Rating table for Child Lock AGE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Universal viewing ✔ — — — — — — — — — — — — — — Parental approval pref. ✔ ✔ ✔ ✔ ✔ — — — — — — — — — — X-rated ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Universal viewing Parental approval pref. X-rated Universal viewing — — — Parental approv...
Page 48 - PIN; SHARP CORPORATION
LC-32DH77E LC-32DH77SLC-42DH77E LC-42DH77SLC-46DH77E LC-46DH77SLC-52DH77E LC-52DH77S LCD COLOUR TELEVISION LCD-FARBFERNSEHGERÄT TÉLÉVISEUR COULEUR À ÉCRAN CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIÓN EN COLOR LCD TELEVISOR DE CRISTAL LÍQUIDO OPERATION MANUAL BEDIEN...
