Sharp HT-SB32D - Manual

5 TV Operation Buttons (Only SHARP TV): On/Standby Button CH VOL Sets the TV power to “ON” or “STANDBY”. Input Select Button (TV) CH VOL Press the button to switch the input source. Volume Up and Down Buttons CH VOL Turn up/down the TV volume. Channel Up and Down Buttons CH VOL Switch up/down the TV...

6 Make sure to unplug the AC power lead before in- stalling the sound bar or changing the position. Using spike legs 1 Peel the double sided tape separator. 2 Fix the spike leg onto the sound bar as shown. To mount the sound bar on the wall Caution: ● Be very careful to prevent the sound bar [2.3 kg...

7 Installation image: SOUND BAR HOME THEATRE SYSTEM HT-SB32D Place the sound bar as shown. Notes: ● Remove the protective film covering the sound bar before turning on the system. ● The front panel of the sound bar is not removable. Caution: ● Do not change the installation direction when the sound ...

8 Rack/ table Screw eye (not supplied) Safety wires (not supplied) Screw eye (not supplied) Sound bar SOUND BAR HOME THEATRE SYSTEM HT-SB32D Safety wires (not supplied) Sound bar Screw eye (not supplied) Wall Falling prevention (continued) ■ When mounting on the wall ■ When placing on the shelf/tabl...

9 Caution: Turn off all other equipment before making any connections. Notes: ● To connect to TV/player, use AUDIO IN or OPTICAL IN terminals located at the rear of the sound bar. ● Refer the operation manual of the equipment to be connected. ● Fully insert the plugs to avoid fuzzy pictures or noise...

10 After checking all the connections have been made correctly, connect the AC power lead to the AC power input socket, then to the wall socket. ■ Using with the AC/DC adaptor 1 Plug the AC power lead into the AC/DC adaptor. 2 Plug the AC/DC adaptor cable into the DC INPUT socket on the sound bar. 3...

11 ■ Battery installation 1 While pushing the locking tab to-wards the center of the remote con-trol, slide out the battery holder. Locking tab Back of remote control 2 Remove the old battery from the battery holder, insert the new bat- tery and then slide the battery hold-er back into the remote co...

12 ■ To turn the power on Press the ON/STANDBY button. The On/Standby/Input Indicator lights up according to input source: Input source On/Standby/Input Indicator OPTICAL IN Turns green AUDIO IN Turns cyan Bluetooth Turns blue Note: If the power does not turn on, check whether the power lead is plug...

13 ■ Audio format During the OPTICAL IN function the AUDIO FORMAT indicator will light up to indicate the audio format. Audio format Audio format indicator Dolby Digital One of the digital audio systems for theatrical use. You can also enjoy the stereophonic effect in the home theatre system.Lights ...

14 SOUND BAR HOME THEATRE SYSTEM HT-SB32D SOUND BAR HOME THEATRE SYSTEM HT-SB32D HT-SB32D NFC detection area M an u al Bl uet oo th s ett i ng Switch ‘ON’ Bluetooth Search/ scan A Bluetooth audio source device (smartphone/ tablet). Pairing Connect ■ About NFC technology Near Field Communication (NFC...

15 1 Peel the separator off the velcro tape (loop type) and stick it on a desired surface. Separator Velcro tape (loop type) 2 Peel the separator off the velcro tape (hook type) and stick it to the rear of the NFC tag. Then place the tag onto the desired location. Separator rear view of the NFC tag ...

16 Bluetooth wireless technology is a short-range radio technology that enables wireless communication between various types of digital devices, such as mobile phone or computer. It operates within a range of about 10 metres (30 feet) without the hassle of having to use cables to connect these devic...

17 Listening to Bluetooth enabled devices (continued) Notes: ● If a device such as microwave oven, wireless LAN card, Bluetooth device or any other device that uses the same 2.4 GHz frequency is placed near the system some sound interruption may be heard. ● The transmission distance of the wireless ...

18 Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service center. ■ General Symptom Possible cause No sound is heard. ● Is the input signal (selecti...

19 Troubleshooting chart ■ Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet or on the transmitter on the remote control. Condensation can cause the sound bar to malfunc- tion. If this happens, leave the power on...

20 FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP CORPORATION OF NEW ZEALAND LIMITED VISIT OUR WEBSITE AT SHARP CUSTOMER SERVICES TELEPHONE: 09 573 0111 FACSIMILE: 09 573 0113 FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR W...