Sennheiser MO 2000 Set - Manual

Page 3 - Contents

1 Contents Safety instructions ..................................................................................................... 2 MO 2000 Set ................................................................................................................ 4 Delivery includes .......................

Page 4 - Safety instructions

2 Safety instructions This instruction manual contains important safety information. Read this instruction manual. Keep this instruction manual in a safe place. Always include this instructionmanual when passing the system on to third parties. Heed all warnings. Follow all instructions. WARNING: To ...

Page 7 - Delivery includes

5 Delivery includes y 1 MO 2000 H optical microphone with 3 m fiber optic cable y 1 MO 2000 CU central unit y 1 mains unit with different country adapters y 1 carrying case y 1 instruction manual LEVEL OVERLOAD 0 0 40 20 +/- 15dB dB GAIN Fiber optic cable Mains unit MO 2000 CU Optical microphone

Page 8 - Product overview MO 2000 Set

6 Product overview MO 2000 Set Gain switch (coarse adjustment) Level control (fine adjustment), with 0 dB mark OVERLOAD LED ON/OFF button Cable grip for power supply DC cable DC socket for connection of power supply unit (DC IN) Audio output (AF OUT BAL), XLR-3M, balanced Audio output (AF OUT UNBAL)...

Page 9 - Putting the system into operation; Fitting the device feet

7 Putting the system into operation Fitting the device feet You can set up the device on an even surface or mount it into a 19” rack. Note: Do not fit the rubber feet when rack mounting the device. Setting up the device To ensure that the device cannot slip on the surface on which it is placed, fixt...

Page 10 - Connecting the mains unit

8 To mount two central units into a rack: 왘 Place the two central units side by side upside-down onto a flat surface. 왘 Align the jointing plate over the holes in the bottom sides of the central units. 왘 Secure the jointing plate to the central units using eight of the supplied recessed head screws ...

Page 12 - Care and maintenance; Accessories

10 Care and maintenance To clean the MO 2000 CU central unit: 왘 Before cleaning, disconnect the device from the mains. 왘 Use a soft, dry cloth to clean the device. Accessories Cat.-No. Accessory 009823 GA 2 rack adapter 525700 MO 2000 H optical microphone 525701 MO 2000 CU central unit 067510 Mains ...

Page 13 - Specifications

11 Specifications MO 2000 CU central unit Housing 1 / 2 19” metal housing Front panel connections andcontrols ON/OFF button with operation indicator, OVERLOAD LED, gain control (coarse adjustment),level control (fine adjustment), with 0 dB mark Rear panel connections andcontrols DC socket for connec...

Page 14 - Connector assignment

12 Connection : fiber optic cable – extension (optional) Interface SC Design multimode 200/230 μ m Cable loss approx. 3–4 dB per 100 m Optical transducer (optional) Interface socket/socket Design type SC Coupling losses 5–6 dB per coupling pair AF cable Design balanced microphone cable with shieldin...

Page 15 - Manufacturer Declarations; Warranty; CE Declaration of Conformity

13 Manufacturer Declarations Warranty Sennheiser GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our web site atwww.sennheiser.com, or contact your Sennheiser partner. CE Declaration of Conformity This equipment is in compliance with...

Sennheiser MO 2000 Set - Manual

Table of Contents:

Summary

Other Sennheiser Models