Seiki SC-1070AU9FLCO - User Manual

7 GENERAL SAFETY INSTRUCTIONS (Cont.) CLEANING AND MAINTENANCE • Before cleaning or maintenance, always unplug the appliance from the power socket. Make sure you pull by the plug, not the cord as this can damage the power cord and cause a hazard.• Only the filter requires regular cleaning, everythin...

9 PRODUCT OVERVIEW Top Cover Water Supply Hose Detergent Dispenser Door Drain Hose Drum Power Cord Supply Control Panel Service Filter Accessories Transport Hole Plug Supply Hose Cold Water

11 OPERATIONS Pre WashThe Prewash function can get an extra wash before main wash,it is suitable for washing the dust rises to surface of the clothes;You need to put detergent into the Case (I) when select it.Extra RinseThe laundry will undergo extra rinse once after you select it.Speed WashThe func...

12 OPERATIONS (Cont.) Other FunctionsMy Cycle Reload This operation can be executed during the washing progress. When the drum is still rolling and there is large amount of water with high temperature in the drum.The state is unsafe and the door cannot be opened forcefully. To press [Start/Pause] fo...

15 Before installing your appliance, read all safety instructions in this manual, especially the sections on electrical safety and installation. GETTING STARTED UNPACKING • When unpacking the appliance, be sure to keep all the packaging materials until you have made sure your new appliance is undama...

19 GETTING STARTED (Cont.) Electrical connection • As the maximum current through the unit is 10A when you are using its heating function, please make sure the power supply system (current, power voltage and wire) at your home can meet the normal loading requirements of the electrical appliances. • ...

20 BEFORE FIRST USE • Before any first wash make sure everything is installed correctly. Make sure to do one wash with no items inside to clean out the tube before your first loaded wash. After the above steps have been completed, In a few simple steps shown below you can select the type of wash you...

26 CLEANING AND MAINTENANCE WARNING: • Before starting maintenance, ensure that the appliance is unplugged and close the tap. CLEANING THE CABINET Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when neces...

27 CLEANING AND MAINTENANCE (Cont.) CLEANING THE INLET FILTER Washing the filter in the tap 1. Close the tap 2. Remove the water supply hose from the tap3. Clean the filter4. Reconnect the water supply hose Washing the filter in the washing machine 1. Screw off the inlet pipe from the back of applia...

29 FAQs Problem Possible Cause Solution Washing machine is not starting Door is not closed properly Restart after the door is closed, check if the clothes are stuck Door can’t be opened Washer’s safety protection is active Disconnect the power and restart the appliance Water Leakage The connection b...

31 SPECIFICATIONS Power Supply 220-240V~50Hz Standard Water Pressure 0.05MPa~1MPa Washing Capacity 10 KG Drying Capacity 7 KG Rated Power 1950W Drying Power 1300W Max. Current 10A Max Spin Speed 1400 RPM Dimensions 595 (w) x 595 (d) x 850 (h) mm Weight: Net: 76 kg / Gross: 82 kg

CUSTOMER HELPLINE: [email protected] DISTRIBUTED BY: Ayonz Pty Ltd